Tennant V-WD-24 User manual

KIT NO. KTRI06192 Page1of2
PLDC04130 Rev. 02 (10-2020) Tennant Company www.tennantco.com
V-WD-24 / V-WD-24P
Squeegee Kit
INSTALLATION INSTRUCTIONS:
Installation Time: 30 minutes
Tools Required: Phillips screwdriver, small flat head
screwdriver and 10mm & 17mm wrenches
Item Part Description Qty
Kit Contents
1 Squeegee Assembly * 1
2 Front Squeegee Mount Plate 1
3 Screw, 6x20 4
4 Washer, M5, Steel 4
5 Nut, M5, Nylock 4
6 Lift Arm Bracket, Right 1
7 Lift Arm Bracket, Left 1
8 Pedal Support Bracket 1
9 Screw, 5x14 Black 4
10 Squeegee Pedal 1
11 Pad, Adhesive 1
12 Clevis Pin, 10x30 1
13 Cotter Pin 1
14 Screw, 10x30 1
15 Spacer Bushing 1
16 Washer, M10 1
17 Nut, M10, Nylock 1
18 Vacuum Hose 1
19 Hose Clip 1
20 Label, Squeegee Lift Instructions 1
1
25
3
47
9
12
13
8
6
18
19
11
10
15
14
1617
20
*Replacement squeegee blades: p/n KTRI05783 (qty 2)
To order replacement parts, visit:
www.tennantco.com/manuals
1. Remove the motor head and carefully turn the machine
upside down.
2. Attach the pedal support bracket to the bottom of the
machine using the four black screws as shown.
4black
screws
3. Turn the machine upright and remove the wheel caps.
Use a small flat head screwdriver to pry off caps.

Page2of2
KIT NO. KTRI06192
PLDC04130 Rev. 02 (10-2020) Tennant Company www.tennantco.com
4. Insert the left and right lift arms into the wheel axle as
shown.
5. Connect the squeegee mount plate to the lift arms using
hardware as shown.
6. Connect the squeegee pedal to the lift arms and lower
support bracket using hardware as shown.
7. Attach the squeegee assembly to the squeegee mount
plate as shown. Secure with yellow knobs.
8. Connect the vacuum hose. Create a loop in the hose
using the hose chip as shown.
9. Adhere the squeegee instruction label on tank as
shown. Adhere the step pad on the pedal as shown.
Step down on pedal to
raise s
q
uee
g
ee
Lift pedal with toe to
lower squeegee
10.For optimal drying performance, the blades should flex
about 45° during use. Turn the two caster adjustment
knobs equally counter-clockwise to raise or clockwise to
lower blades.