Tennsco SRS-601878 Series Instruction Manual

GENERAL SAFETY INFORMATION
Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury.
For safety, wear a pair of work gloves when assembling or performing any maintenance on products.
LIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply in
the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by persons not authorized by Seller, where goods are damaged during
shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED:
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER’S OPTION, AND SHALL IN NO
EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the
goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty
and are returned within the warranty period stated above.
ASSEMBLY INSTRUCTIONS & PARTS MANUAL
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE
Welded 15- and 16-Person Lockers &
Welded Wall Mounted Lockers
Tennsco LLC. , Dickson, TN 37056-1888 • [phone]
PK-2600619

REPLACEMENT PARTS
REF.
NO.
1
2
3
4
5
6
7
PART NO.
1. Attach the horizontal section frame and
side on both ends to the frame and side
of the vertical units, using six bolts and
nuts and tighten securely.
2. After attaching the horizontal section to the vertical outer units,
stand the units up using at least one more person to help. Now slide
three hangers over the coat rod and bolt the hangers under the middle
section as shown. Attach with one bolt per hanger. Outer hangers bolt
through the side of the unit; center hanger can bolt
straight up into the locker bottom.
3. Anchor the unit to the wall or
oor. Lockers are not intended
to stand free, and may topple
if not secured. Units standing
back to back should be bolted
together.

NOTE: Additional hardware may be included for replacement purposes.
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.
However, should your unit contain missing or damaged parts, please contact your purchase location.
Ref.
No. 4
Ref.
No. 3
Ref.
No. 5
Ref.
No. 2
*Included in hardware pack enclosed (Part No.: HWSRSHP).
49B260
Locker Door
Finger Pull
Coat Rod Bracket
Coat Rod
Number Plate/Clear Label Cover*
Push Plug*
Bolts and Nuts #8-32 x ½”*
LBD-1212
LFP-1
LCRB-1
LCR-36
LCR-48
LNP-3CP
LPP-1
**
16
16
3
--
1
16
32
15
15
15
3
1
--
15
30
15
4
4
3
--
1
4
8
3
3
3
3
1
--
3
6
3
QTY.
DESCRIPTION
16-PERSON
SRS-721878-x
15-PERSON
SRS-601878-x
4-PERSON
BS1-121812-4
3-PERSON
BS1-121812-3
**Available Locally

Ref.
No. 1



NOTE: Illustrations below show a
15-Person Locker; the 16-Person Locker
assembles exactly the same way, except
there is an additional locker opening in
the center section.