TORO 301 High Lift TECHNICAL SPECIFICATION
L00301HL-2 2/2
SANDVIK TAMROCK reserves the right to change this
specification without further notice
ISO 9001
CERTIFIC
TED
FIRM
SANDVIK TAMROCK Corp., P.O. Box 434
FIN-20101 Turku, Finland
Tel. +358 20544131
Fax. +358 20544130
www.toro.sandvik.com
Weights
Operating weight 16 600 kg (36 597 lb)
Total loaded weight 22 800 kg (50 266 lb)
Shipping weight 16 400 kg (36 156 lb)
Capacities
Tramming capacity 6200 kg (13 670 lb)
Breakout force, lift 130 kN (13 200 kg) (29 100 lb)
Breakout force, tilt 106 kN (10 900 kg) (24 022 lb)
Tipping load 12 600 kg (27 778 lb)
Bucket std. 3,0 m³ (3.9yd³), HB500/400
Bucket motion times
Raising time 6,7 sec.
Lowering time 3,9 sec.
Tipping time 2,0 sec.
Driving speeds forward and reverse
1st gear 5,0 km/h (3.1 mph)
2nd gear 10,0 km/h (6.2 mph)
3rd gear 25,0 km/h (15.5 mph)
Engine
Diesel engine Deutz BF4M 1013C
Output 112 kW/2300 r/min (150 hp)
Torque 572 Nm 1400 r/min
Number of cylinders in line 4
Displacement 4760 cm³
Cooling system Water cooled
Combustion principle 4-stroke/turbo, intercooler
Electric system 24V
Air filtering Donaldson
Exhaust system Catalytic purifier, muffler and
exhaust pipe
Fuel tank capacity 180 l (47 gal.)
Drive line
Converter Dana SOH, C 273
Gearbox Dana SOH, R 28361
Axles Front, Dana SOH, 16D
Rear, Dana SOH, 16D, oscillating ± 10°.
Tyres
Size and type 17.5*25 L5S, Bridgestone
Operator compartment
Safety canopy.
Height 2150 mm (85”)
Width 2050 mm (81”)
Lubrication system
Manual centralized lubrication
Optional automatic central lubrication
Manual languages
Spare part manual
Operation instructions main European languages
Maintenance instructions main European languages
Engine spare part information English
Machine spare part information English
Workshop manual
Operation instructions main European languages
Maintenance instructions main European languages
Engine workshop manual Original
Power train components manual Original
Optional equipment instructions English
Optional bucket sizes
•Bucket size 2,7 m3(3.5 yd3), width 1900 mm (75”),
HB500/400.
•Bucket size 3,0 m3(4.0yd3), width 1900 mm (75”),
HB500/400.
•Bucket size 3,3 m3 (4.3yd3), width 2100 mm (83”),
HB500/400.
•Ejector bucket, 3.0 m3(4.0yd3), width 2100 mm (83”),
HB500/400.
