Toro BRC-28 User manual

FormNo.3418-253RevA
BRC-28LiftFrameKit
ModelNo.138-4320
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescriptionQty.Use
Liftframe1
Sidemountbolt4
Locknut4
Frontmountingbolt2
Frontmountblock1
Liftingeye1
Flatwasher2
Lockwasher1
1
Lifting-eyebolt1
Installtheliftframe.
1
InstallingtheLiftFrame
Partsneededforthisprocedure:
1Liftframe
4Sidemountbolt
4Locknut
2Frontmountingbolt
1Frontmountblock
1Liftingeye
2Flatwasher
1Lockwasher
1Lifting-eyebolt
Procedure
Note:Discardanyremovedhardwareunless
otherwisedirected.
1.Parkonalevelsurface,shutofftheengine,and
removethekey.
2.Bendtheupperportionsofthetie-downsections
onthehandlesupportbracessothattheyare
nearlyvertical(Figure1).
g242155
Figure1
Leftsideshown
1.Tie-down4.Handlesupportbrace
2.Uppernuts5.Bolts
3.Nuts(insidechassis)
©2018—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedinAustralia
AllRightsReserved*3418-253*A
PRELIMINARY

3.Removetheboltsandnutsretainingthehandle
supportbracesandremovethebraces(Figure
1).Retaintheuppernutsforlaterinstallation.
Note:Leavetheboltsinthehandlesothatthe
handleremainsinplace.
4.Installtheliftframetothemachine(Figure2).
Note:Tilttheframetowardtherearofthe
machine;loweritovertheengineandthentiltit
forwardtoproperlyaligntheframe.
g242156
Figure2
1.Frontmountange4.Frontmountblock(insidechassis)
2.Frontmountbolt(2)5.Sidemountbolt(4)
3.Liftframe
5.Insertthehandlesupportbracesbetweenthe
frameandthemachine.
6.Looselysecurethesidesoftheliftframetothe
chassiswith2sidemountboltsand2locknuts
fromthekitintherearmostmountingholes.
7.Installthehandlesupportbracestothehandle
usingthenutsretainedinstep3.
8.Usethefrontmountangeasatemplateand
markthepositionsofthe2holes.
9.Pivottheframebackwardanddrill2holes(11or
12mm)inthechassisatthemarkedpositions.
10.LowertheframeinplaceasshowninFigure2
andlooselyinstalltheremaining2sidemount
boltsand2locknutsfromthekittotheside
mountingholesoftheframe.
11.Positionthefrontmountblockbeneaththe
mowerchassisandalignitbeneaththefront
mountange.
Note:Toalignthemountblock,youcanhook
theblockwithapieceofwireandpullthewire
upthroughthedrilledholes.
12.Applymedium-strengththread-locking
compound(suchasBlueLoctite®243)tothe
frontmountboltsandinstallthemtothefront
mountangeandfrontmountblock.
13.Tightenallframemountingboltsandnuts
securely.
Important:Ensurethatthefrontmount
angeisatagainstthetopofthemower
chassisbeforetightening.
2
PRELIMINARY

14.Installtheliftingeye,washers,andbolttothe
topoftheliftframeasshowninFigure3.
g242157
Figure3
3
PRELIMINARY

PRELIMINARY