Toro ProCore 648 User manual

Form No. 3465-490 Rev A
Adapter Kit
ProCore
®
648 Aerator
Model No. 161-3721
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty .
Use
No parts required
–
Prepare the machine.
Adapter 1
Retainer block 1
Bolt (1/2 x 1-1/2 inches)
2
Install the Adapter Kit.
Preparing the Machine
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Shut of f the engine and remove the key .
© 2023—The T oro® Company
81 1 1 L yndale A venue South
Bloomington, MN 55420
Register at www .T oro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3465-490*

Installing the Adapter Kit
1. Install the kit to the tie-down as shown in Figure
1.
g463530
Figure 1
1. Adapter 3. Retainer block
2. T ie-down
4. Bolt (1/2 x 1-1/2 inches)
2. Secure the machine to the trailer using the
adapter ( Figure 2 ). Ensure that the kit is secure.
g464928
Figure 2
1. Adapter 3. Lock lever
2. J-hook
4. Quick-release pin
2