Toro 04135 User manual

FormNo.3442-982RevA
LightKit
Greensmaster®1000SeriesMower
ModelNo.04135
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescriptionQty.Use
1Nopartsrequired–Preparethemachine.
LEDlight2
Lightmount2
Mountcap2
Bolt(3/8inch)2
Bolt(5/16inch)2
Nut(3/8inch)2
2
Nut(5/16inch)2
Installthelights.
3Wireharness1Installthewireharness.
4Switch1Installtheswitch.
IfyouinstallthiskittoaModel04860or04861tractionunit,ensurethatthepartnumberforthekitwireharness
is122-2178.
Ifyouhaveanolderwireharness(PartNumber122-1418),replaceitwiththenewwireharness(PartNumber
122-2178);refertoyourauthorizedTorodistributorforthenewwireharness.
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.Engagetheparkingbrake.
3.Shutofftheengine.
4.Removethespark-plugwirefromthesparkplug;refertoyourmachineOperator’sManual.
©2020—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3442-982*

2
InstallingtheLights
Partsneededforthisprocedure:
2LEDlight
2Lightmount
2Mountcap
2Bolt(3/8inch)
2Bolt(5/16inch)
2Nut(3/8inch)
2Nut(5/16inch)
Procedure
1.Use2bolts(3/8inch),2bolts(5/16inch),2nuts
(3/8inch),and2nuts(5/16inch)tosecurethe
lightmountstothemachineframe(Figure1).
2.Installthemountcapsontothemounts(Figure
1).
3.Usethewashersandnutsprovidedwitheach
LEDlighttosecurethelightstothemounts
(Figure1).
g282107
Figure1
1.Mountcap6.Bolt(5/16inch)
2.Lightmount7.LEDlight
3.Nut(3/8inch)8.Washer—LEDlight
assembly
4.Nut(5/16inch)9.Nut—LEDlightassembly
5.Bolt(3/8inch)
2

3
InstallingtheWireHarness
Partsneededforthisprocedure:
1Wireharness
Procedure
RefertoFigure2forthisprocedure.
g290476
Figure2
1.P02(wireharness)toleft
light
3.P01(wireharness)toright
light
2.Refertostep3.
1.Connectthewire-harnessendlabeledP02to
thelightontheleftsideofthemachine.
2.Connectthewire-harnessendlabeledP01to
thelightontherightsideofthemachine.
3.Performtheappropriatestepforyourmachine
asfollows:
FormachinesnotequippedwiththeWireless
HourMeter(WHM)Kit:
•Connectthekit-wire-harnessendlabeled
J02tothewhiteendofthemachinewire
harnesslabeledJ4.
•Connectthekit-wire-harnessendlabeled
J01tothefemaleconnectionoftheengine
wireharness.
FormachinesequippedwiththeWirelessHour
Meter(WHM)Kit:
•ConnecttheWHMwire-harnessendlabeled
J01tothewhiteendoftheenginewire
harness.
•ConnecttheWHMwire-harnessendlabeled
J02totheblackendofthelight-kitwire
harnesslabeledJ02.
•ConnecttheWHMwire-harnessendlabeled
J03toenginemountingboltasaground.
•ConnecttheWHMwire-harnessendlabeled
J04tothewhiteendofthemainwire
harness.
•ConnecttheWHMwire-harnessendlabeled
J05tothegreenendoftheenginewire
harness.
•Connectthewhiteendofthelight-kitwire
harness(labeledJ01)tothegreenendofthe
mainwireharness.
3

4
InstallingtheSwitch
Partsneededforthisprocedure:
1Switch
Procedure
1.Removetheplugfromthehandle(Figure3).
2.Connecttheswitchwiththe8-socketconnector
ofthewireharness(Figure3).
g282108
Figure3
1.Plug3.8-socketconnector
2.Switch
Operation
OperatingtheLights
•Turnonthelights:Pressthetopoftheswitch
(Figure4).
•Turnoffthelights:Pressthebottomoftheswitch
(Figure4).
g282109
Figure4
1.Turnonthelights.2.Turnoffthelights.
4

Notes:

Notes:

DeclarationofIncorporation
TheT oroCompany,8111LyndaleAve.South,Bloomington,MN,USAdeclaresthatthefollowingunit(s)
conform(s)tothedirectiveslisted,wheninstalledinaccordancewiththeaccompanyinginstructionsontocertain
ToromodelsasindicatedontherelevantDeclarationsofConformity.
ModelNo.SerialNo.ProductDescriptionInvoiceDescriptionGeneralDescriptionDirective
04135—LightKitLIGHTKIT ,WALKGR
(2019+)
2006/42/EC,
2014/30/EU
RelevanttechnicaldocumentationhasbeencompiledasrequiredperPartBofAnnexVIIof2006/42/EC.
Wewillundertaketotransmit,inresponsetorequestsbynationalauthorities,relevantinformationonthispartly
completedmachinery.Themethodoftransmissionshallbeelectronictransmittal.
ThismachineryshallnotbeputintoserviceuntilincorporatedintoapprovedT oromodelsasindicatedonthe
associatedDeclarationofConformityandinaccordancewithallinstructions,wherebyitcanbedeclaredin
conformitywithallrelevantDirectives.
Certied:AuthorizedRepresentative:
MarcelDutrieux
ManagerEuropeanProductIntegrity
ToroEuropeNV
Nijverheidsstraat5
2260Oevel
Belgium
JohnHeckel
EngineeringDirector
8111LyndaleAve.South
Bloomington,MN55420,USA
November2,2020