Trinity TSC-7202 User manual

TRINITY 72” x 24” Wood Top Work Table
Model # TSC-7203
OWNER’S MANUAL
TRINITY 72” x 19” Wood Top Work Table
Model # TSC-7202
Important / Important / Importante
DOWNLOAD THE FREE APP | TÉLÉCHARGER L’APPLICATION GRATUITE| DESCARGUE LAAPLICACIÓN GRATUITA
Directives intelligentes
Instrucciones Inteligentes
FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS
POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES
PARA INSTRUCCIONES DE ENSAMBLAJE RAPIDAS Y SENCILLAS EN 3D

Your TRINITY 72” Wood Top Work Table should include the following parts. Please inspect box contents to
ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or [e-mail]. Parts can also be requested online
via “Contact Us” section at www.trinityii.com.
For assembly you will need a Phillips screwdriver. A drill with 13mm socket and Phillips bit is recommended.
PARTS LIST
A
TOP CROSS
BEAM (2)
B
BOTTOM CROSS
BEAM (1)
C
LARGE BOLT (12)
13mm Hex Head
D
SMALL SCREW (20)
Phillips Head
E
I J
F G
SMALL WASHER
(20) WRENCH (1)
LARGE WASHER
(12)
© 2021 TRINITY - 800.985.5506
1
H
WOOD TOP (1)
TSC-7202: 72”x19”
TSC-7203: 72”x24”
LEFT SIDE FRAME (1)
Feet Levelers
pre-installed
RIGHT SIDE FRAME (1)
Feet Levelers
pre-installed

ASSEMBLY INSTRUCTIONS
STEP 1
I (4)E (1)
© 2021 TRINITY - 800.985.5506 2
D (1)
Find WOOD TOP (A) box inside package and place it tape-side
up on the ground on a smooth flat surface. Make sure there is
enough space to open and unfold box.
Open WOOD TOP (A) box carefully keeping WOOD TOP (A)
laying face down inside. Unfold box to use as a work surface.
Take RIGHT (D) and LEFT (E) SIDE FRAMES and orient parts as
shown. Attach SIDE FRAMES (D+E) to WOOD TOP (A) using (4)
SMALL SCREWS (H) and (4) SMALL WASHERS (I).
D
E
A (1) H (4)
A
E
H
I
Only hand tighten SMALL SCREWS (H). Do not
fully tighten until Step 4.
A
•For proper orientation make sure Insert Nuts on
SIDE FRAME for mounting CROSS BEAMS are
towards the inside of the table.
•The side with extra set of Insert Nuts for BOTTOM
CROSS BEAM (C) should be oriented towards back of
table, opposite logo edge on WOOD TOP (A).
Insert Nuts

© 2021 TRINITY - 800.985.5506
3
ASSEMBLY INSTRUCTIONS
STEP 2
H (16) I (16)
Place TOP CROSS BEAMS (B) on Wood Top. Make sure holes on “L” brackets
on end of TOP CROSS BEAMS (B) line up on outside of Side Frames.
Align TOP CROSS BEAMS (B) with insert nuts found on underside of Wood Top.
Insert (16) SMALL SCREWS (H) through SMALL WASHERS (J) and partially
tighten by hand to attach TOP CROSS BEAMS (B) to WOOD TOP (A).
H
B
I
B (2)
B
B
A
Only hand tighten SMALL SCREWS (H).
Do not fully tighten until Step 4.

ASSEMBLY INSTRUCTIONS
Attach TOP CROSS BEAMS (B) to Side Frames using (8) LARGE BOLTS (F)
and (8) LARGE WASHERS (G).
STEP 4
F (8) G (8)
Fully tighten bolts with provided wrench
or a screwdriver.
© 2021 TRINITY - 800.985.5506 4
F
G
E
B
A
J (1)
J
E
D
Fully tighten all (20) SCREWS (H) to WOOD
TOP (A) with a Phillips screwdriver.
STEP 3

ASSEMBLY INSTRUCTIONS
STEP 5
© 2021 TRINITY - 800.985.5506
5
Take BOTTOM CROSS BEAM (C) and align it to RIGHT (D) and LEFT (E)
SIDE FRAMES as shown. Make sure holes on “L” brackets on end of
BOTTOM CROSS BEAM (C) line up on outside of Side Frames.
Attach BOTTOM CROSS BEAM (C) to Side Frames using (4) LARGE
BOLTS (F) and (4) LARGE WASHERS (G).
Adjust table height if desired (see next page) before carefully turning
table upright.
Adjust Feet Levelers to ensure Table is level.
G (4)F (4)C (1)
Fully tighten bolts with provided wrench
or a screwdriver.
C
E
F
G
C
Table Leg
Feet Leveler
J (1)
J

© 2021 TRINITY - 800.985.5506 6
USAGE INSTRUCTIONS
HEIGHT ADJUSTMENT
3. Insert and tighten (2) LARGE BOLTS
(F) and LARGE WASHERS (G). Adjust
Feet Levelers to ensure Table is level.
1. With table upside down, remove LARGE
BOLTS (F) and LARGE WASHERS (G) from
table legs.
2. Adjust legs to desired height. Make
sure height adjustment allows for (2)
LARGE BOLTS (F) to be inserted into each
table leg. Table height can be adjusted
from 34” to 40” in 2” increments.
J (1)

© 2021 TRINITY - 800.985.5506
7
SERVICE PARTS LIST –TSC-7202 / TSC-7203
Part Number Description Part Number Description
1) LNA-06-002-7219 Wood Top-72”x19” 8) ZBK-01-038-0820 Large Bolt
2) LNA-06-002-7224 Wood Top-72”x24” 9) ZBK-01-007-0816 Large Washer
3) PBK-13-002-6750 Top Cross Beam 10) PBK-14-002-1729 Left Side Frame
4) PBK-14-003-1729 Right Side Frame 11) PBK-13-001-6750 Bottom Cross Beam
5) PBK-04-011-1250 Adjustable Leg 12) ZSV-01-004-0415 Small Screw
6) XBK-98-016-4160 Feet Leveler 13) ZSV-01-007-0412 Small Washer
7) XXX-97-003-0001 Wrench
TRINITY Customer Service provides the following replacement parts:
13
12
10
9
8
11
5
2
6
3
7
1
4

© 2021 TRINITY - 800.985.5506 8
WARNINGS
1. Read and understand all instructions. Failure to follow all instructions may result in injury
and/or damage.
2. The warnings, cautions, and instructions discussed in this manual cannot cover all
possible conditions or situations that may occur. The user must always be aware of their
environment and ensure that they use the product in a safe and responsible manner.
3. Do NOT modify the product in any way. Unauthorized modification may impair the
function and/or safety of the product, and may affect the life of the product. Any
modifications will void product warranty.
4. Check for damaged parts.Before using this product, carefully check that all parts are in
good condition, and that the product will operate properly and perform its intended
function. Check for damaged parts and any other conditions that may affect the operation
of this product. Replace damaged or worn parts, and never use this product with a damaged
part.
5. Do NOT overload the product.
6. Assemble the product as instructed. Ensure that ALL screws are used to assemble the
product. Do NOT leave any off.
7. Do NOT allow children to climb or play around the product. Tipping may occur causing
injury.
CARE AND MAINTENANCE
Total weight capacity of work table (evenly distributed) 2,000 lb
•Avoid harsh, abrasive cleaners, and other corrosive chemicals.
•Wood top can be cleaned with damp cloth and wiped dry immediately with dry cloth. If
needed, solvent-based wood furniture cleaner can be used.
•Clean up any spills immediately to prevent stains from forming on wood top.
•Do not put hot items directly on wood top to prevent damaging and discoloring wood
surface.

© 2021 TRINITY - 800.985.5506
9
Thank you for purchasing a TRINITY 72” Wood Top Work Table. In order to register your product and
receive streamlined customer service, please fill out the following Product Registration Form and (1)
fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com
or (3) scan and email the form to [e-mail]. Include a copy of your original receipt
with your submission.
First Name: Last Name:
Address:
City: State: Zip Code:
Email Address: Phone:
Product Model #: TSC-7202 / 7203 Purchase Date: / /
Location of Purchase:
Please rate the importance of each feature (1=least important; 10=most important)
Quality Price Size/Capacity Appearance Other
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
PRODUCT REGISTRATION