Trinity ECOSTORAGE TBFZ-0909 User manual

OWNER’S MANUAL
TRINITY ECOSTORAGE™ 4-TIER NSF CORNER
WIRE SHELVING RACK
Model # TBFZ-0909
Everything in its place.®

Your TRINITY EcoStorage™ 4-Tier NSF Corner Wire Shelving Rack should include the following parts.
Please inspect box contents to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or [e-mail]. Parts can also be requested online
at www.trinityii.com (Help & More, Contact Us).
You will need no additional tools for assembly.
PARTS LIST
TOP POLE (5)
End Cap (5) and
Pole Connector (5)
are pre-installed
SLIP SLEEVE
(40) + (2) extra
Please inspect box contents to ensure you have received all components.
Note: The black circular plastic tops in between the Shelves are used only for packaging purposes. They
are NOT NEEDED. Please discard.
CASTER (w/wrench)
(2 locking, 3 non-locking)
For mobile option
FEET LEVELER (5)
For stationary option
BOTTOM POLE (5)
Threaded Insert (5)
Is pre-installed
MIDDLE POLE (5)
Pole Connector (5)
Is pre-installed
SHELF (4)
© 2017 TRINITY - 800.985.5506
1
ABC D
EFG

ASSEMBLY INSTRUCTIONS
STEP 2: SLIP SLEEVES
STEP 1: Stationary Option
Screw each FEET LEVELER (G) into the bottom of
each BOTTOM POLE (A). Turn clockwise to screw
in place.
STEP 1: Mobile Option
* For safety and stability, the lowest SHELF (D) should be lower than the 3rd notch from the bottom.
** Note: There will be a very small gap in-between the SLIP SLEEVES (E)—this is normal.
© 2017 TRINITY - 800.985.5506 2
A (4)
Screw each CASTER (F) into the bottom of each
BOTTOM POLE (A). Turn clockwise to screw in
place. Make sure the Locking Casters are on the
same side.
Use the provided caster wrench to tighten
completely. Failure to do as instructed could
result in the caster stem breaking.
F (5) G (5)
A (5) E (10)
For easiest assembly, do not connect the TOP POLES (C),
MIDDLE POLES (B), and BOTTOM POLES (A) until
instructed. Once connected, these will be the posts for
the Rack.
Note that each POLE (A+B+C) has slight horizontal line
indentations at 1” intervals. Each SLIP SLEEVE (E) has
raised horizontal lines inside designed to lock them in
place on the POLE (A+B+C).
On BOTTOM POLE (A), place 1 pair of SLIP SLEEVES (E) at
the desired level. Please make sure the arrow faces up
and that the word “TOP” is right side up. Do this for
each BOTTOM POLE (A), and make sure that the heights
are identical for each BOTTOM POLE (A).
Slide the pair of SLIP SLEEVES (E) until you hear a click to
confirm the pair is locked onto the BOTTOM POLE (A).
DO NOT place more than one pair on each BOTTOM
POLE (A) at a time.

ASSEMBLY INSTRUCTIONS
Screw the MIDDLE POLES (B) into the
BOTTOM POLES (A).
STEP 4: INSTALLING MIDDLE POLES
STEP 3: INSTALLING BOTTOM SHELF
© 2017 TRINITY - 800.985.5506
3
Place SHELF (D) on its side and slide the (5)
BOTTOM POLES (A) through the holes in the
SHELF (D). Make sure that the SHELF (D)
corner cylinders are positioned over the SLIP
SLEEVES (E).
Stand the unit upright.
*Note: The level side of the SHELF (D) is the
TOP side (the TRINITY logo on the corner
cylinders should be right-side up).
**Use a rubber mallet, if needed, to secure
the SHELVES (D).
D (1)
B (5)

ASSEMBLY INSTRUCTIONS
STEP 5: INSTALLING SHELVES
Screw the TOP POLE (C) into the MIDDLE
POLE (B).
The tops of the TOP POLES are indicated by
the BLACK END CAP.
STEP 6: INSTALLING TOP POLES
© 2017 TRINITY - 800.985.5506 4
E (10) D (1)
On POLE (A+B), place 1 pair of SLIP SLEEVES (E)
at the desired distance between SHELVES (E).
Please make sure the arrow faces up and that
the word “TOP” is right side up. Do this for each
POLE (A+B), and make sure that the heights are
identical for each POLE (A+B).
Lower SHELF (D) over the MIDDLE POLES (B) so
that the corner cylinders of the SHELF (D) are
positioned over the SLIP SLEEVES (C).
Repeat Step 5 to install other SHELVES (D) as
desired.
**Use a rubber mallet, if needed, to secure the
SHELVES (D).
C (5)

5© 2017 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
STEP 7: INSTALLING SHELVES
E (20) D (2)
On POLE (A+B+C), place 1 pair of SLIP SLEEVES (E) at
the desired distance between shelves. Please make
sure the arrow faces up and that the word “TOP” is
right side up. Do this for each POLE (A+B+C), and
make sure that the heights are identical for each
POLE (A+B+C).
Lower SHELF (D) over the TOP POLES (C) so that the
corner cylinders of the SHELF (D) are positioned over
the SLIP SLEEVES (E).
Repeat Step 4 to install other SHELVES (D) as
desired.
**Use a rubber mallet, if needed, to secure the
SHELVES (D).

© 2017 TRINITY - 800.985.5506 6
Part Number Description Part Number Description
1) ZSV-03-010-2718 Shelf 7) ZSV-99-008-4010 Locking Caster
2) XBK-01-011-2543 Slip Sleeve 8) XXX-97-002-0001 Wrench
3) ZSV-04-006-2475 Top Pole 9) XBK-98-003-2538 Feet Leveler
4) ZSV-04-007-2000 Middle Pole 10) ZSV-01-013-2523 Pole Connector
5) ZSV-04-008-2750 Bottom Pole 11) XBK-23-004-2517 End Cap
6) ZSV-99-007-4010 Non-locking Caster
SERVICE PARTS LIST –TBFZ-0909
2
1
3
4
6
8
9
10
7
11
TRINITY Customer Service provides the following replacement parts:
5

© 2017 TRINITY - 800.985.5506
7
WARNINGS
1. Read and understand all instructions. Failure to follow all instructions may result in injury
and/or damage.
2. Use the provided caster wrench to tighten casters completely. Failure to do as instructed
could result in the caster stem breaking thereby causing the shelving rack to collapse.
3. The warnings, cautions, and instructions discussed in this manual cannot cover all
possible conditions or situations that may occur. The user must always be aware of their
environment and ensure that they use the product in a safe and responsible manner.
4. Do NOT modify the product in any way. Unauthorized modification may impair the
function and/or safety of the product, and may affect the life of the product.
5. Check for damaged parts.Before using this product, carefully check that all parts are in
good condition, and that the product will operate properly and perform its intended
function. Check for damaged parts and any other conditions that may affect the operation
of this product. Replace damaged or worn parts, and never use this product with a damaged
part.
6. Do NOT overload the product.
CARE AND MAINTENANCE
•Avoid harsh, abrasive cleaners, and other corrosive chemicals
•This item is not certified for outdoor use
Weight capacity per Shelf on Feet Levelers 600 lb (evenly distributed)
Weight capacity per Shelf on Casters 200 lb (evenly distributed)
Total weight capacity of Cart
(evenly distributed)
2400 lb (on Feet Levelers)
800 lb (on Casters)

Thank you for purchasing a TRINITY EcoStorage™ 4-Tier NSF Corner Wire Shelving Rack.
In order to register your product and receive streamlined customer service, please fill out the
following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the
Product Registration Form online at www.trinityii.com or (3) scan and email the form to
[e-mail]. Include a copy of your original receipt with your submission.
First Name: Last Name:
Address:
City: State: Zip Code:
Email Address: Phone:
Product Model #: TBFZ-0909 Purchase Date: / /
Location of Purchase:
Please rate the importance of each feature (1=least important; 10=most important)
Quality Price Size/Capacity Appearance Other
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
PRODUCT REGISTRATION
© 2017 TRINITY - 800.985.5506 8

© 2017 TRINITY - 800.985.5506
9