U-Line H-2532 User manual

PAGE 1 OF 2 0320 IH-2532
πH-2532
SINGLE-FOLD
TOWEL DISPENSER
1-800-295-5510
uline.com
TOOLS NEEDED
Drill 1/4" Drill Bit Phillips Screwdriver
Dispenser x 1
Key x 1 Wall Anchor x 4 Screw x 4
Level Tape Measure
PARTS
MOUNTING INSTRUCTIONS
NOTE: Ensure that proper mounting hardware
is used for appropriate wall composition.
Enclosed hardware may not be compatible
with wall surface.
1. Insert key into the lock opening on top of dispenser
and turn clockwise to open cover. (See Figure 1)
2. Open dispenser cover and hold dispenser to ideal
mounting place on wall. (See Figure 2)
Figure 1
Figure 2
Side Lens

PAGE 2 OF 2 0320 IH-2532
1. Remove wrap from bundle of towels.
2. Load towels into dispenser and close cover.
(See Figure 5)
NOTE: Bundle of towels can be placed in either
direction.
MOUNTING INSTRUCTIONS CONTINUED
LOADING INSTRUCTIONS
3. Mark the four holes on the wall where screws will be
inserted. (See Figure 3)
4. Drill into wall at four marked locations with 1/4"drill
bit. (See Figure 4) Insert wall anchors if necessary.
5. Hold dispenser over previously drilled holes and
insert screws.
Figure 3
Figure 5
Figure 4
πCHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
Recommended Mounting Locations