U-Line H-5168 User manual

PAGE 1 OF 2 0715 IH-5168
1-800-295-5510
uline.com
πH-5168, H-5169
H-5170
POLE/WALL MOUNT
RECEPTACLE
PARTS
TOOLS NEEDED
Tin Snips Flat Head Screwdriver 1/2" Wrench
Bolt x 4
(Included with H-5170)
Lock Washer x 4
(Included with H-5170)
Metal Strap x 2
(Inlcuded with H-5168 and H-5169)
Bolt x 2
(Included with H-5168
and H-5169)
Nut x 2
(Included with H-5168
and H-5169)
Buckle x 4
(Included with H-5168
and H-5169)

PAGE 2 OF 2 0715 IH-5168
H-5168 AND H-5169 POLE/WALL MOUNTING
Use this method to mount the receptacle to an existing
pole up to 12" in diameter using the provided metal
straps.
1. Using tin snips, cut metal straps 4" longer than the
circumference of the pole
2. Insert the metal straps through the slots on the
mounting bracket attached to the receptacle.
(See Figure 1)
3. Insert straps through buckles and bend back excess
strap, leaving just enough space to connect the
buckles using the bolt and nut when wrapped
around the pole. (See Figure 2)
4. Wrap the straps around the pole and connect the
buckles using the bolt and nut. Use the screwdriver
to tighten the bolt. (See Figure 3)
H-5170 POLE MOUNTING
Use this method to mount the receptacles to the H-5170
Surface Mount Pole.
1. Use the bolts and lock washers included with the
pole to attach the receptacle to the pole through
the pre-drilled holes. (See Figure 4)
MOUNTING
Figure 1
Figure 2
Figure 3
Figure 4
πCHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com