U-Line H-4378 User manual

PAGE 1 OF 2 1213 IH-4378
Wire utility carts
1-800-295-5510
uline.com
πH-4378, H-4379
H-4380
CASTER INSTALLATION
INSTRUCTIONS FOR UNIT ASSEMBLY
Shelf
Support
03
04
05
06
07
08
09
Figure 2
Figure 1
Figure 3
TO INSTALL CASTERS
1. Make sure post is positioned as shown. (See Figure 1)
2. Engage the wheel brakes to keep casters from rolling during
assembly. Use a rubber mallet to tap caster stems into posts.
(See Figure 1)
1. Start with the lowest shelf. Snap the interlocking pieces of a
shelf support (wide end down) around the post at the lowest
groove where shelf is to be located. Slide the support up or
down until it snaps onto the groove. Add a shelf support to the
same place on the remaining posts. (See Figure 2)
NOTE: NSF requires food service applications to keep the
lowest shelf at least 6"above the floor.
2. Slide post through underside of shelf until shelf slides firmly
over supports. (See Figure 3)
TOOLS NEEDED
Rubber Mallet

PAGE 2 OF 2 1213 IH-4378
INSTRUCTIONS FOR UNIT ASSEMBLY CONTINUED
Figure 4
Figure 5
3. Stand unit upright. Gently tap shelf down to secure it.
(See Figure 4)
NOTE: Keep casters in locked position to keep unit from rolling
during remainder of assembly.
π CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
4. Determine the height of the next shelf, snap on supports then
add and secure shelf. (See Figure 5)