Uberhaus 98495005 User manual

with

1245

10(6+4 extra)12(8+4 extra)Ref.DescriptionQty3/8"(ST4*10) Philips round head screw3/4"(ST4*20) Philips round head screwWall plugsDecorative capScrewdriverSiliconeDrillLevelTape measureRubber malletPencil16(12+4 extra)10(6+4 extra)

10(6+4 extra)1 ½" (ST4*40) Philips round head screwHARDWARE LISTREQUIRED TOOLS HammerTrowelShim

Drill bits

1234563

1 1/8"(ST4*30) Philips round head screw10(6+4 extra)8mm(5/16")3.2mm(1/8")5mm(3/16")

11223344*5A

667788*91011Ref.DescriptionQty10911*

Rail

Retaining clipDoor bottom wheelLeft sliding doorPVC Magnetic door sealFixed glass panelFixed panel sealFixed panel trackWall trackDoor handleDoor top wheelRef:BB14Ref:AARef:DDRef:CC14DescriptionMachine screw(M4X20) Hardware kit12ANut UNCFlat washerScrew(ST4*20)*Items included in the Hardware Box12B13*Base109648212Long vertical leak proof seal1244122222242BB*AA*CC*DD*12A5B

12B

Right sliding door1Short vertical leak proof seal223OPTIONAL ACRYLIC WALLS(98495005/98495009/98495013/98495017)PARTS LIST1313

ABCDE98495008 7"178mm32 1/2"825mm31 1/4"794mm3 3/4" 95mm39 1/3"999mm 44"1118mm 7"178mm 12"305mm11 4/5"300mm 35 1/5"895mm37 1/3"948mm 39 3/5"1006mm 34"863mm 36"914mm 38 1/5"971mmAD

ROUND BASE 98495008/98495012/98495016/98495020Ref:EEEE*Spring washer 36"914mm 411/2" 1054mmVariable sizes

ABDEC

1/8(3mm)1/4(6mm)13(9+4 extra)13(9+4 extra)26(18+8 extra)13(9+4 extra)10(6+4 extra)33 3/4" 95mm3 3/4" 95mm3 3/4" 95mmShower wall984950129849501698495020QtyRef.

ATTENTION!If you are proceeding with the shower base installation with our acrylic walls, follow steps from A to J.If you are proceeding with the shower base installation with any other wall finish, follow step K to V.

STEP:AShower base installation with acrylic walls(sold separately)Shower base installation with tiled walls(sold separately)90°ATTENTION!Walls must be perfectly perpendicular (90º) to the floor for an optional installationDDDrywall1BASE INSTALLATION WITH ACRYLIC WALLSSHOWER BASE INSTALLATION!

Walls in your bathroom must be leveled for an optional installation.Shower baseSiliconeTileDrywallScrewSIDE SECTION VIEWAbout 20mmAttention:in a new construction, the shower base should be installed before installing the tiles.

CONTINUED1CONTINUED1STEP:BSTEP:CSTEP:DSTEP:FSTEP:GSTEP:E

STEP:H

MortarPut the base on the correct position .Trace the base outline on the floor with a pencil. Mark drain location as well. Remove the base .Cover the marked space with mortar. Cut a round hole for the drain .Place base back in its location, over the mortar.Make sure the base is level .

STEP:J!ATTENTION!CONTINUED1CONTINUED1STEP:I6XRef: (ST4*40)Drill six holes in the middle of base lip, on both sides. Holes should be aligned with wall studs.Fix the base to the wall with screws( ) .

1110

(3.2mm)DRILL BIT

Wait 24h before proceeding with theinstallation of the shower walls & doors.This will ensure that the mortar is dry.

DD90°

STEP:KSTEP:MSTEP:NBASE INSTALLATION ON TILED WALL2STEP:O2STEP:L

1312

Put the base on the correct position. Remove the base. Cover the marked space with mortar. MortarCONTINUEDTrace the base outline on the floor with a pencil. Mark drain location as well.Walls in your bathroom must be vertical for an optional installation.

STEP:QSTEP:RSTEP:T(3.2mm)DRILL BITSTEP:SCONTINUED2CONTINUED26X

1514

STEP:PCut a round hole for the drain. Place base on mortar, making sure the drain hole is perfectly aligned. Make sure the base is level.Drill six holes in the middle of the baselip, on both sides. Holes should be aligned with wall studs.Ref: (ST4*40)

Fix the base to the wall with screws( ).

!ATTENTION!Wait 24h before proceeding with the installation of the shower door.This will ensure that the mortar is dry.Shower baseSiliconeTileDrywallScrewSTEP:VSIDE SECTION STEP:WCut the box in the same shape as the shower base and place cutout over base for protection. CONTINUEDCONTINUEDSTEP:U

1617

22About 20mmAttention:in a new construction, the shower base should be installed before installing the tiles.

3STEP:XSilicone!ATTENTION!BBCCCONTINUEDAdd a bead of silicone along the wall joint, as shown in the illustration.Place the shower wall vertically on the base, and use a pencil to trace a line along the edge of the shower wall.

1918

ACRYLIC WALL INSTALLATION(OPTIONAL)3Ref:AARef:BBRef:CCRef:EEAA9X(5mm)DRILL Attach both shower walls together with machine screws(AA,BB,CC,EE) as shown in theillustration.Acrylic walls must be leveled with theshower base so that the space between the base and the shower walls is constant.