Ubiquiti IsoStation M5 User manual

IsoStationM5 MetalStrap GigabitPoE(24V,0.5A)with
MountingBracket
PowerCord
PackageContents
InstallationRequirements
TheISM5comeswithadefaulthornantenna,Horn545,andiscompatible
withthefollowingoptions:
Horn530
Horn560
Horn590
UOMTDish
7mmsocketwrenchorscrewdriver
ShieldedCategory5(orabove)cablingwithdrainwireshouldbeusedforall
wiredEthernetconnectionsandshouldbegroundedthroughtheACgroundof
thePoE.
Werecommendthatyouprotectyournetworksfromharmfuloutdoor
environmentsanddestructiveESDeventswithindustrialgrade,shielded
EthernetcablefromUbiquiti.Formoredetails,visitui.com/toughcable
Surgeprotectionshouldbeusedforalloutdoorinstallations.Werecommend
thatyouusetwoEthernetSurgeProtectors,modelETHSP,onenearthe
IsoStationandtheotherattheentrypointtothebuilding.TheETHSPwill
ISM5QuickStartGuide

absorbpowersurgesandsafelydischargethemintotheground.
HardwareOverview

PowerLED
EthernetPort
ResetButton
ReleaseButton
TheLEDwilllightgreenwhenthedeviceisconnectedtoapowersource.
ThisGigabitEthernetportisusedtoconnectthepowerandshouldbe
connectedtotheLANandDHCPserver.
Toresettofactorydefaults,pressandholdtheResetbuttonformorethan10
secondswhilethedeviceispoweredon.Alternatively,thedevicemaybereset
remotelyviaaResetbuttonlocatedonthebottomoftheGigabitPoEAdapter.
Thedefaulthornantenna(beamwidth:45°)canbeswappedoutforanoptional
hornwithadifferentbeamwidth.Toremoveit,rotatethehornantenna
counterclockwisewhiledepressingtheReleaseButton.
HardwareInstallation
1.
2.

PoleMounting
1.
2.
ConnectingPower

ConnectingPower
1.
2.
3.

4.
5.

6.Connectthepowerusing:
includedGigabitPoEAdapter
PoEswitch
ConnectingtothePoEAdapter
1.ConnecttheEthernetcablefromthedevicetothePOEportofthePoEadapter.
2.ConnectanEthernetcablefromyourLANtotheLANportofthePoEadapter.
3.ConnectthePowerCordtotheadapter,andthenplugthePowerCordintoa
poweroutlet.
MountingthePoEAdapter(Optional)
1.RemovethePoEMountingBracketfromtheadapter,placethebracketatthe
desiredlocation,andmarkthetwoholes.
2.Predrilltheholesifnecessary,andsecurethebracketusingtwofasteners(not
included).
3.Aligntheadapter’sslotswiththetabsofthePoEMountingBracket,andthen
slidetheadapterdown.
WARNING:Theswitchportmustcomplywiththepowerspecifications
listedinthisQuickStartGuide.

AccessingairOS
VerifyconnectivityintheairOSConfigurationInterface.
1.MakesurethatyourhostsystemisconnectedviaEthernettothedevice.
2.ConfiguretheEthernetadapteronyourhostsystemwithastaticIPaddresson
the192.168.1.xsubnet.
3.Launchyourwebbrowserandtypehttps://192.168.1.20intheaddressfield.
Pressenter(PC)orreturn(Mac).
4.EnterubntintheUsernameandPasswordfields.SelectyourCountryand
Language.YoumustagreetotheTermsofUsetousetheproduct.ClickLogin.
TheairOSConfigurationInterfacewillappear,allowingyoutocustomizeyour
settingsasneeded.Fordetails,refertotheUserGuideavailableat
ui.com/download/airmax
YoucanalsomanageyourdeviceusingtheUbiquiti®NetworkManagement
System.SetupusingtheUNMS™apprequirestheUInstaller,soldseparately.
InstallerComplianceResponsibility
Devicesmustbeprofessionallyinstalledanditistheprofessionalinstaller’s
responsibilitytomakesurethedeviceisoperatedwithinlocalcountryregulatory
requirements.

TheOutputPowerfieldisprovidedtotheprofessionalinstallertoassistinmeeting
regulatoryrequirements.
Specifications
ISM5
Dimensions

WithoutHorn
174x174x150mm
(6.85x6.85x5.91")
131x131x65mm
(5.16x5.16x2.56")
Weight

WithoutHorn
725.7g
(1.60lb)
408.2g
(0.90lb)
Beamwidth 45°(DefaultHorn)
NetworkingInterface (1)10/100/1000EthernetPort
LED Power
Max.PowerConsumption 6.5W
PowerSupply 24V,0.5AGigabitPoEAdapter(Included)
PowerMethod PassivePoE(Pairs4,5+;7,8Return)
SupportedVoltageRange 20to26VDC
WindLoading 36N@200km/h
(8.09lbf@125mph)

ISM5
WindSurvivability 200km/h
(125mph)
OperatingTemperature 40to70°C(40to158°F)
OperatingHumidity 5to95%Noncondensing
Mounting PoleMount(KitIncluded)
ESD/EMPProtection ±24kVContact/Air
Certifications CE,FCC,IC
OperatingFrequency(MHz)
Worldwide 51505875
US/CA UNII1 51505250
UNII2A 52505350
UNII2C 54705725
UNII3 57255850
SafetyNotices
1.Read,follow,andkeeptheseinstructions.
2.Heedallwarnings.
3.Onlyuseattachments/accessoriesspecifiedbythemanufacturer.
WARNING:Failuretoprovideproperventilationmaycausefirehazard.Keepatleast
20mmofclearancenexttotheventilationholesforadequateairflow.
WARNING:Toreducetheriskoffireorelectricshock,donotexposethisproductto
rainormoisture.
WARNING:Donotusethisproductinlocationthatcanbesubmergedbywater.
WARNING:Avoidusingthisproductduringanelectricalstorm.Theremaybea
remoteriskofelectricshockfromlightning.
ElectricalSafetyInformation
1.Complianceisrequiredwithrespecttovoltage,frequency,andcurrentrequirements
indicatedonthemanufacturer’slabel.Connectiontoadifferentpowersourcethanthose
specifiedmayresultinimproperoperation,damagetotheequipmentorposeafirehazardif
thelimitationsarenotfollowed.
2.Therearenooperatorserviceablepartsinsidethisequipment.Serviceshouldbeprovided
onlybyaqualifiedservicetechnician.
3.Thisequipmentisprovidedwithadetachablepowercordwhichhasanintegralsafety