URBAN OUTFITTERS DANICA CHAIR 59605063 User manual

Page 1 of 2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
DANICA CHAIR
Assembly Instructions
(A) BOLT
M6 x 30mm 16x
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean,smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or air conditioning vents.
Blot spills,do not rub, with a clean,white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED
(B) Flat Washer
M6 x 18mm 16x
(C) Hex Key
1x
(D) Legs
4x
(E) Chair
1x

Take out the legs and hardware
Page 2 of 2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
DANICA CHAIR
Assembly Instructions
STEP 1
Place the chair body (E) upside down onto a clean, smooth surface. Unzip the pocket on the bottom and
remove the leg and hardware package.
STEP 2
Align the legs (D) with all 4 corners. Insert bolt (A) and flat washer (B). Tighten with supplied hex key (C)
as shown.
Finished
With help, flip the chair upright. You may need to tighten bolts after several weeks of use.
BA
C
D