VDO VDR 3202-B User manual

VDR 3202-B
The VDR 3202 release B is a digital tachograph for the
Chinese market. It meets the requirements of the
standard GB/T19056-2003 as well as of international
environmental and electrical automotive standards.
It benefits from the worldwide experience of VDO in
tachographs and combines a high quality with a wide
range of functionalities.
It allows data, such as driving and rest times, speed,
rpm, status inputs, as well as information needed for
calibration, to be digitally recorded.
The VDR 3202-B fits into a standard 1-DIN radio slot
and consists of a recording unit with mass memory.
Different configurations regarding the chip card
reader, the printer, the illumination and the CAN inter-
face are available in order to meet all the customers’
requirements.
Thanks to its seals preventing from opening the hous-
ing or removing the connectors, the smart cards and
the possibility to use smart sensors KITAS 2171 the
VDR 3202-B is a highly tamperproof system.
Data relating to the vehicle and driver are stored in an
integral mass memory with capacity for recording
activities for approx. 360 hours. Accident data stored
into the mass memory can provide important infor-
mation for the vehicle accident analysis. Additionally
important driver-related data are stored on a personal
driver card (smart card) inserted into the digital tacho-
graph before each journey or shift begins.
The VDR 3202-B has interfaces for connecting to on-
board electronics or an instrument cluster (electronic
speedometer). Mass memory data can be uploaded
via the front RS232 and USB interfaces. RS232 inter-
face is also used to calibrate the system (note that only
authorized service partners are permitted to perform
system calibration).
It is exceptionally easy to upload, evaluate and store
this digital data for business management purposes.
We offer appropriate solutions such as the VDRDMS
software.
www.vdo.com
Digital tachograph

VDO – A Trademark of the Continental Corporation09/2008 | A2C59512730 | We reserve the right to make changes in availability as well as technical changes without prior notice.
Continental Automotive GmbH | Heinrich-Hertz-Strasse 45 | 78052 Villingen-Schwenningen | Germany
E-mail: [email protected] | www.vdo.com
System components
The radio slot-sized VDR 3202-B include a smart card
reader (automatic or manual), a display (different
colors available), a thermal printer (integrated/external),
a real time clock, operating controls and a data sto-
rage facility. The VDR 3202-B can also be optionally
connected to an analog speed indicator or an in-
strument cluster.
Data recording
The VDR 3202-B records the following data:
•Time:driver‘sdrivingtime,break/resttime,
log in/log out time, data upload & download time
•Vehiclespeed:averagespeedperminuteforthe
last 360 hours
•Enginespeed:averagespeedperminuteforthe
last 360 hours
•Accidentdata:thelast3recordscan
be locked/unlocked
•Fatiguedrivingevents:drivingmorethan4hours
without resting at least 20 minutes; accumulated
drivingtimehigherthan8hourswithin24hours
•Overspeedevents
•Vehiclemovingwithignitionoff
•Dooropen/close
•Eventsandfaults
•Specialparameterssuchasthevehiclecoefficient
characteristic, rpm.
Access rights/Data protection
Special tachograph cards are used in the VDR 3202-B
to comply with data protection requirements and
ensure security. Authorized workshops can activate
the calibration function of the VDR 3202-B using their
workshop card.
Functionality/Options
•Variousdisplayilluminationcolors
•Fullyautomatic/manualsmartcardreader
•Externalthermalprinter/integratedthermalprinter
•KITASspeedsensor/normalspeedsensor
•Chinesemenutextwithsymbols
•CANbus
•K-Linediagnostics
•Rpminput
•Vehiclespeedinput
•10statusinputs
•Warningfordifferentevents
Technical specifications
•Installationdimensions:178mm×50mm×150mm
(w×h×d),1-DINradioslotformat
•Operatingvoltage:24V–12V
•Measuringrange:0to220km/h
•Operatingtemperature:–25°Cto+70°C
•Storagetemperature:–40°Cto+85°C
•Pulserange:4,000to25,000pulsesperkm
•Clock:real-timeclock
•Inputs:speedsensor,nsensor,10additionalinputs
•Outputs:2×vpulse;1×4pulses/m
•Accuracy:
Speed: ± 1 km/h
Distance: 5 km ± 0.1 km
Time: ± 2 s per day
•Datakeepingtime:>1year(withoutpower)
•Protection:IP43
•Weight:approx.1000g
Interfaces
•CANinterfaceforsystemandvehicle
•K-Linediagnosticinterface
•Interfaceforsmartsensor
•Signaloutput(vpulse,4pulses/m)
•RS232interfaceforprogramming,calibrationand
data upload, communication to external device
•USBinterfacefordatauploadbyUSBmemorystick
VDR 3202-B
Digital tachograph