VeriFone VX 805 User manual

One Blue Hill Plaza, 16th Floor, PO Box 1546
Pearl River, NY 10965
1-800-PC-AMERICA, 1-800-722-6374
(Voice) 845-920-0800 (Fax) 845-920-0880
1 | P a g e
Verifone VX 805 with Chase Paymentech
through DataCap
This document provides step-by-step instructions on installing the Verifone VX 805, configuring settings,
and processing transactions in CRE/RPE using Chase Paymentech through DataCap. You must be on
version 12.70160 or higher to use this processor with the VX 805.
Note: You must have a Deployment ID for the computer acting as the NetEpay server created prior to
attempting this installation. You must also have a License for each station that is processing
transactions through the NetEpay server. If you do not have them, please contact your reseller or
processor for information on how to obtain them.

2 | P a g e
TABLE OF CONTENTS
REVISION HISTORY 3
INSTALLING THE VX 805 DRIVER 4
INSTALLING DSIEMVUS CONTROL (REQUIRED ON EACH PC USING A VX 805) 8
INSTALLING DSIPDCX CONTROL (REQUIRED ON EACH PC USING A VX 805) 11
INSTALLING NETEPAY (REQUIRED ON PC THAT WILL ACT AS DATACAP SERVER ONLY) 14
CONFIGURING SETTINGS IN CRE/RPE (REQUIRED ON EACH PC THAT WILL PROCESS CARD PAYMENTS)21
CONFIGURING CASH BACK WITH A DEBIT CARD & EBT CASH SALE 23
CONFIGURING THE VX 805 TO ACCEPT EBT CARDS 24
RINGING UP AN EMV CREDIT CARD SALE USING THE CHIP READER 25
PERFORMING A DEBIT SALE WITH CASHBACK 28
PERFORMING A MANUAL ENTRY SALE 32
PERFORMING A BATCH SETTLEMENT 36

3 | P a g e
Revision History
Document Version
Date
Author
Description of Changes
1.0
Sep 20, 2016
MP
1st Release
2.0
Sep 28, 2017
MP
Updated format, Added
Install note regarding Extra
Signature Copy
2.1
January 19, 2018
MP
Updated steps for
configuring the payment
processing settings and
pinpad type.
2.2
April 6, 2018
MP
Updated links to Datacap
Software
Installation notes:
Note: You must be running CRE/RPE version 12.70160 or higher to use the
VX 805 with Chase Paymentech for processing. To install the required version of CRE/RPE Windows 7
or above is required.
The merchant is responsible for contacting their Reseller and obtaining a Merchant Number, as well as having a
Deployment ID created on DataCap’s PSCS Server prior to installation.
The click here for the pinpad’s supported application load for version supported by DataCap & Chase
Paymentech.
The NETePay software only needs to be installed on 1 station which will act as the DataCap server.
It is recommended to install the NETePay Software on a back office computer that can act as a server.
The VX 805 driver, dsiPDCX software, and dsiEMVUS software needs to be installed on each station
that will process card payments.
The credit card settlement only needs to be run once, from any station where card payments are
processed.
Device encryption is configured by the processor prior to deployment.
As of version 12.8023 and newer, the receipt option Suppress Extra Signature Copy is unavailable due
to requirements of the Datacap Platform
As of version 12.8031 and newer, the steps for configuring CRE’s payment processing settings have
changed have changed.

4 | P a g e
Installing the VX 805 driver
Download the VX 805 driver from the following link:
http://download2.pcamerica.com/drivers/Manufacturer/Verifone/VX805_Driver.zip
1. Locate the downloaded file VX805_Driver.zip. Right-
click on the file and extract its contents.
2. Right-click on the VX805_Driver.exe file that was just
extracted and click on Run as administrator.
3. Accept the agreement and click on Next.

5 | P a g e
4. Wait while the driver installs. When it is finished the
installer window will close automatically.
5. On the VX 805, take the USB connector,
and connect it to any available USB port on the
computer.

6 | P a g e
6. The screen should display a Welcome message when
fully booted.
7. In Windows, go to Control Panel > Device Manager.
8. Expand the Ports branch. You should now see the VX
805 with a COM port assigned to it in parenthesis. This
is usually configured for COM9.

7 | P a g e
9. In Windows Control Panel > Programs and Features,
10. An entry for VeriFone Vx Installer version should also
be created if the driver installed correctly.

8 | P a g e
Installing dsiEMVUS control (required on each PC using a VX 805)
Download the latest dsiEMVUS control software for Chase from the following link, Select NETePay5.0 to expand the list,
and select Paymentech Host EMV - PNH.
11. Under dsiEMVUS 1.##, click on Download.
12. Right-click on the dsiEMVUS-100-
Install201*****-W8.exe file and click on
Run as administrator.
13. Click on Next.

9 | P a g e
14. Accept the agreement and click Next.
15. Enter a User Name and Organization then
click Next.
16. Click on Install.

10 | P a g e
17. Click on Finish.
18. Click on Yes when prompted to restart.