VIRTUFIT Hyperextension Pro User manual

ROMA CHAIR
USER MANUAL
Hyperextension
U ser manual
EN

VirtuFit Hyperextension 2
EN
PARTS LIST
NUMBER DESCRIPTION IMAGE QTY
1Main Frame 1
2Adjustment Tube 1
3Hand Bar 1
4Bottom Tube 1
5Pedal Frame 1
6Foam Tube 1
7Plate 2
8Cushion (Right) 1
9Cushion (Left) 1
10 Foam Roller 2
11 Quick Knob 1
12 Foot End Cap 2
2
2
2
2
2
2

TITEL HOOFDSTUK
VirtuFit Hyperextension
3EN
PARTS LIST
NUMBER DESCRIPTION IMAGE QTY
13 Mid-empty Plug (50x26mm) 2
14 38mm Square Plug 1
15 50mm Square Plug 2
16 25mm Round Plug 2
17 Hand Grip 2
18 Mid-empty Plug (50x45mm) 1
19 Hex Bolt M10x70mm 6
20 Hex Bolt M8x20mm 4
21 M10 Washer 12
22 M8 Washer 5
23 M10 Nylon Nut 6
2
2
2
2
2
2

TITEL HOOFDSTUK
VirtuFit Hyperextension 4
EN
ASSEMBLY INSTRUCTIONS
STEP 1
ASSEMBLY INSTRUCTIONS
STEP 1
1. Attach the Pedal Frame (5) and the Plate (7) to the Main Frame (1), using two
M10X70mm Hex Bolts (19), four M10 Washers (21) and two M10 Nylon Nuts
(23).
2. Attach the Bottom Tube (4) and the Plate (7) to the Main Frame (1), using two
M10X70mm Hex Bolts (19), four M10 Washers (21) and two M10 Nylon Nuts
(23).
3.Insert the Adjustment Tube (2) into the Main Frame (1), using one Quick Knob
(11).
3
1. Attach the Pedal Frame (5) and the Plate (7) to the Main Frame (1), using two
M10X70mm Hex Bolts (19), four M10 Washers (21) and two M10 Nylon Nuts (23).
2. Attach the Bottom Tube (4) and the Plate (7) to the Main Frame (1), using two
M10X70mm Hex Bolts (19), four M10 Washers (21) and two M10 Nylon Nuts (23).
3. Insert the Adjustment Tube (2) into the Main Frame (1), using one Quick Knob (11).

TITEL HOOFDSTUK
VirtuFit Hyperextension
5EN
ASSEMBLY INSTRUCTIONS
STEP 2
ASSEMBLY INSTRUCTIONS
STEP 2
1. Attach the Hand Bar (3) to the Adjustment Tube (2), using two M10X70mm
Hex Bolts (19), four M10 Washers (21) and two M10 Nylon Nuts (23).
2. Attach the Cushion (Right) (8) and the Cushion (Left) (9) to the Hand Bar (3),
using four M8X20mm Hex Bolts (20) and four M8 Washers (22).
3. Insert the Foam Tube (6) into the Main Frame (1), then slide the Foam Roller
(10) onto the Foam Tube (6).
4
1. Attach the Hand Bar (3) to the Adjustment Tube (2), using two M10X70mm
Hex Bolts (19), four M10 Washers (21) and two M10 Nylon Nuts (23).
2. Attach the Cushion (Right) (8) and the Cushion (Left) (9) to the Hand Bar (3),
using four M8X20mm Hex Bolts (20) and four M8 Washers (22).
3. Insert the Foam Tube (6) into the Main Frame (1), then slide the Foam Roller
(10) onto the Foam Tube (6).

TITEL HOOFDSTUK
VirtuFit Hyperextension 6
EN
EXPLODED DRAWING
EXPLODED DRAWING
5

For questions or missing parts please contact your dealer.