VIRTUFIT Wooden Plyo Box User manual

Wooden Plyo Box
User manual
EN
WARNING:
Before beginning any exercise program consult your physician. This is especially important for people
who are over 35 years old or who have pre-existing health problems. Read these instructions carefully
before using the VirtuFit Wood Plyo Box. You receive important information about the use and safety of
your VirtuFit Wood Plyo Box. VirtuFit takes no responsibility for any injuries or property damage caused
by the use of this fitness equipment.
ATTENTION
TOOLKIT
When you open the carton, and you will find the below parts in the carton:
LARGE PANEL (2X) SMALL PANEL (2X) MEDIUM PANEL (2x) WOOD SCREWS (36x)

VirtuFit Wooden Plyo Box 2
EN
USER MANUAL
STEP 1
STEP 3
STEP 5
ASSEMBLY INSTRUCTIONS
STEP 2
STEP 4
STEP 6
Start by indentifying the bottom and placing the
finished side down. Connect one of the sides to the
base and install the one screw on the side that will
connect the two pieces. Provided you don’t start
moving the base, this should remind secure.
Repeat step 2 for the third side.
Fix all the screws with an electric screwdriver.
Install the second side by fitting in to the slot on
the base and the adjacent side. Install 2 screws,
one screw attaching to the piece at the floor and
the other screw at the center connecting the two
vertical side pieces. You will install the remaining
screws when all sides are assembled.
Install the fourth side with 3 screws. The center
screw on each side and the screw at the center
connecting this side to the bottom panel.
• Place the top on the structure and install all
screws on the top.
• Rotate the VirtuFit Wood Plyo Box and install
all remaining screws so that the sit flush with
the surface of the VirtuFit Wood Plyo Box.
24x 4x