VIRTUFIT Elite TR-500i User manual

Elite TR-500i Loopband
User manual
ENG
T [phone]
E service@tnessbenelux.nl
Wwww.tnessbenelux.nl
Twekkelerweg 263
7553 LZ Hengelo
The Netherlands
Fitness
Benelux
Benelux
Uw partner in fitness
For questions or missing parts, please contact Fitness Benelux:

2
Elite TR-500i Treadmill
ENG
INDEX
Index
Safety Precautions P 3
Checklist P 6
Assembly Steps P 7
Folding Steps P 17
Operation Instruction P 19
App instructions P 39
Tips for Stretching P 42
Maintenance P 43
Explosive drawing P 44
Part list P 46

3
Elite TR-500i Treadmill ENG
SAFETY PRECAUTIONS
Thank you for purchasing this treadmill, it has been designed and manufactured to
give you many years of trouble free service. You may already be familiar with using a
similar product but please take the time to read these instructions which have been
written to ensure that you get the very best from your purchase.
- To reduce the risk of serious injury, read the following important warnings before using the treadmill.
- Before starting any exercise program you should consult your doctor to determine if you have any
physical or health conditions that could create a risk to your health and safety, or prevent you from
using the treadmill properly. Your doctor’s advice is essential if you are taking medication that aects
your heart rate, blood pressure or cholesterol level.
- Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: Pain, tightness in your chest, irregular
heartbeat, extreme shortness of breath, feeling light-headed, dizzy or nauseous. If you do experience
any of these conditions you should consult your doctor before continuing with your exercise
program.
Failure to observe the following warnings may increase the risk of an electric shock and personal injury.
- Always check the power cable for damage prior to use. If any damage is observed, do NOT use the
power cable.
- Never touch the power cable with wet hands.
- Position the power cable so that it cannot be walked on or pinched.
- Only the supplied power cable should be used with the treadmill.
WARNING
ELECTRICAL SAFETY PRECAUTIONS

4
Elite TR-500i Treadmill
ENG
- Use the treadmill only in the way described in this instruction book.
- Ensure that the voltage of the electrical supply is the same as that indicated on the power cable
- It is the responsibility of the owner to ensure that all users of the treadmill are adequately informed
of all warnings and safety precautions.
- The treadmill is heavy and should be removed from the packaging and assembled by two people.
- Before assembling the treadmill, make sure that it is not plugged into any electrical source, such as a
wall socket.
- Use the treadmill on a solid, at level surface with a protective cover for your oor or carpet. Position
the treadmill with at least 2 meters * 1 meter of free space behind the treadmill.
- Keep the treadmill away from excessive moisture and dust.
- Before using the treadmill, check the nuts and bolts are securely tightened.
- The safety level of the treadmill can be maintained only if it is examined regularly for damage and
wear. Replace defective components immediately. Do not use the treadmill until they have been
replaced.
- The treadmill has been tested and certied to EN957 under class H.C. Suitable for domestic, home
use only.
- Braking is controlled by the belt rotation power supply.
- The treadmill is not suitable for therapeutic use.
- Keep children and pets away from the treadmill. The treadmill is designed for adult use only.
- Wear suitable clothing whilst using the treadmill. Avoid wearing loose clothing which may get
caught in the treadmill or clothing that may restrict or prevent movement.aerobic schoenen met
rubberen zolen.
GENERAL SAFETY PRECAUTIONS
SAFETY PRECAUTIONS

5
Elite TR-500i Treadmill ENG
- Do not arch your back when using the treadmill; always try to keep your back straight.
- If you feel pain or dizziness while exercising, stop immediately and cool down.
- The pulse sensor is not a medical device. Several things including user movement, may aect the
accuracy of the sensor.
The sensor is intended only as an exercise aid in determining general heart rate trends.
- Care must be taken when lifting or moving the treadmill so as not to injure your back. Always use
proper lifting techniques
and/or use assistance.
- A safe key is supplied for personal safety. Use the safe key when operating the treadmill for the
emergency dismount function. In the event of an emergency, place both hands on the handlebars
and put your feet onto the non-slip surface of the main frame. As you do this, the safe key will
disengage from the computer and the emergency dismount function will be triggered.
- All moveable accessories require weekly maintenance. Check them before use every time. If anything
is broken or loose, please x it immediately. You may continue using the treadmill after any damaged
parts have been xed.
- The treadmill is not to be used by children or persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given adequate supervision
or instruction.
- Supervised children using the treadmill must not be allowed to play with the treadmill.
- This machine must be well earthed. It can decrease the danger of electric shock .
SAFETY PRECAUTIONS

6
Elite TR-500i Treadmill
ENG
CHECKLIST
TOOL KIT
Please check the package list carefully before assembly.
NR. DESCRIPTION SPECIFICATIONS QTY
A Mainframe 1
B Monitor 1
C iPad holder (optional) 1
B01 Bottle holder 1
B08 Cross solid wrench 1
B09 5# Allen wrench 5mm 1
B15 Solid wrench 19mm 1
C05 Left foam handlebar 1
C06 Right foam handlebar 1
D07 Safety key module 1
C14 Left bottom cover 1
C15 Right bottom cover 1
E13 Bolt M8*15 10
E22 Bolt M5812 6
E32 Lock washer 8 10
E39 Big at washer Φ5*φ13*1.0 4
Toolkit:
Assembly tools:
5# Inner hex wrench 5mm 1pc
Cross solid wrench S=13 14 15 1pc
Solid wrench 19mm 1pc
Attention: please don`t switch on before nish assembling.

7
Elite TR-500i Treadmill ENG
ASSEMBLY STEPS
STEP 1
Open the package and put the mainframe A on the oor.
Attention: Don’t open the packing belt (P) before set up of the treadmill

8
Elite TR-500i Treadmill
ENG
STEP 2
Lift up column A06,A07 rst;
Fix the column A06 to the mainframe A with bolt E13 and lock washer E32 by 5# Allen wrench B09 .
Fix the column A07 to the mainframe according to the steps above.
ATTENTION: Support the column with hand to avoid falling down.
ASSEMBLY STEPS

9
Elite TR-500i Treadmill ENG
STEP 3
Connect the monitor cable D03 with D04. Fix the monitor B to the left and right column A06\A07 with bolt
E13 and lock washer E32 by 5# Allen wrench B09.
Attention: Please make sure cables are well connected before fasten.
ASSEMBLY STEPS

10
Elite TR-500i Treadmill
ENG
STEP 4
Attach the tablet holder (C) to the console (B) using the wrench (B15). The tablet holder is optional and can
be omitted if you wish.
Note: First, manually conrm the screw holder (B12) of the tablet holder in the console (B) and then
tighten it with nut B13 and wrench B15.
ASSEMBLY STEPS

11
Elite TR-500i Treadmill ENG
STEP 5
Fix the left and right foam handlebar C05\C06 to the monitor B with bolt E22 and big washer E39 by cross
solid wrench B08
ASSEMBLY STEPS

12
Elite TR-500i Treadmill
ENG
STEP 6
Attach the left and right cover (C14 / C15) to the frame. Make sure everything is well conrmed.
ASSEMBLY STEPS

13
Elite TR-500i Treadmill ENG
STEP 7
Fix the bottle holder B01 to the right column A07 with bolt E22 by solid cross solid wrench B08.
ASSEMBLY STEPS

14
Elite TR-500i Treadmill
ENG
STEP 8
Before running, please nip the safety key clip D07 with your cloth.
For any emergency, please pull the safety key rope , and the machine will stop.
ASSEMBLY STEPS

15
Elite TR-500i Treadmill ENG
STEP 9
Remove bolt M8 * 15 (E13) at the bottom of the steel cable (E) with 5 # inner wrench lock B09.
ASSEMBLY STEPS

16
Elite TR-500i Treadmill
ENG
STEP 10
Take apart the bolt M8*15 ( E13) in the bottom side of the steel cable (E) with 5# Allen wrench B09.
ASSEMBLY STEPS

17
Elite TR-500i Treadmill ENG
FOLDING STEPS
PUSH UP
Hold the running deck which showed in“F” posi-
tion and then fold it up with the arrow direction
until you hear a“bang”voice from the air cylinder.
Attention: it is forbidden to fold up when the
machine is in running or incline mode.
Support place F with hand , kick the place E of air
pressure bar, then the base frame will fall down
automatically.

18
Elite TR-500i Treadmill
ENG
FOLDING STEPS
To transport, hold the treadmill from position “F”
and tilt until the wheels are able to move on the
ground.
To tilt, start by placing one hand at position “F”to
support the top end of the treadmill. Next, place
one foot at position“D” to hold the bottom end of
the treadmill steady. With your foot at “D”, slowly
tilt the top of the treadmill downward towards
the ground. Once the Main Frame“F” reaches a
low enough point, the wheels of the treadmill will
become active.

19
Elite TR-500i Treadmill ENG
OPERATION INSTRUCTION
CONSOLE FUNCTIONS
Icon Function description
Pad/mobile phone holder
TFT color screen
Inclination/calorie window
Generally it shows runner’s calories worked out. it will count from 0 to 999,
when up to 999, it will count again from 0; when count down, it will count
from the setting data to 0, when down to 0, the machine will stop smoothly
and enter into the standby mode. When set inclination, it shows your current
inclination from 0-15%, if there is not any operation, it will enter into calorie
window after 30s.
Time window : Display running time
Distance window : Display the running distance
Speed/Pulse window: usually it shows your current speed from 0.8-20.0km/h;
if you hold the pulse sensor for several seconds it shows your current pulse
from 50-200/min. (the date just for reference, cannot be used as the medical
purpose).

20 Elite TR-500i Treadmill
ENG
OPERATION INSTRUCTION
INCLINE 6, 8, 10: Shortcut key for inclination
Inclination adjustment key: Press this button to set the value under setting
mode. Press this button to adjust the incline when the machine is working. 1
section at each press, when press the button over 0.5 seconds, the incline with
be up or down continually.
Press the MODE key continuously to choose “15:00” , “1.00” , “50.0” ,“contest
mode” and “0:00”ve mode (15:00 is time countdown mode, 1.00 is distance
countdown mode, 50.0 is calorie countdown mode, 0:00 is manual mode).
Play/pause key : to stop or restart the music or video.
You can press this button to make choice around 3 entertainments in sequence:
standby mode, audio mode and video mode . When playing video, press this
button will make the video full screen.
When getting through the power and safety key attached, press this button at
any time to start the machine.
Safety key.
Stop key
Mp3 interface : You can connect external MP3 and mobile phone with MP3 wire
to play music.
Press it for several seconds to turn down the volume in both music and video
mode. Press it shortly and it will enter into the previous music or video.
Press it for several seconds to turn up the volume in both music and video
mode. Press it shortly and it will enter into the next music or video
Press the PROG key and the machine will show P1-P2………P24,U1…U3, HP1,
HP2, FAT in sequence (P1-P24 are preset programs;U1-U3 are userdefined
programs; HP1-HP2 is heart rate control program, it is an optional function
according to order request; FAT is body fat test function)
SPEED 6,8,10: Shortcut key for direct speed choice
Speed adjustment key. Under initial situation, set the data with this button.
When the machine is running, press the button to adjust the speed, 0.1 KM at
each press, when press the button over 0.5 seconds, the speed will be up or
down continuely