Cat. No. 89094-752 / 620-1824
Cat. No. 89094-754 / 620-1884
Cat. No. 89094-756 / 620-1885
Cat. No. 89094-758 / 620-1886
©2015 92-4241-60 Rev. 1 01115
Technical service
Web Resources
Visit the VWR’s website at www.vwr.com for:
• Français, Español, Deutsch, Italiano, Português version
• Complete technical service contact information
• Access to VWR’s Online Catalogue, and information about
accessories and related products
• Additional product information and special offers
Contact us for information or technical assistance contact your
local VWR representative or visit. www.vwr.com.
Warranty
VWR International warrants that this product will be free from
defects in material and workmanship for a period of two (2) years
from date of purchase. If a defect is present, VWR will, at its op-
tion, repair, replace, or refund the purchase price of this product
at no charge to you, provided it is returned during the warranty
period. This warranty does not apply if the product has been
damaged by accident, abuse, misuse, or misapplication, or from
ordinary wear and tear. For your protection, items being returned
must be insured against possible damage or loss. This warranty
shall be limited to the replacement of defective products. IT IS
EXPRESSLY AGREED THAT THIS WARRANTY WILL BE IN
LIEU OF ALL WARRANTIES OF FITNESS AND IN LIEU OF
THE WARRANTY OF MERCHANTABILITY.
GO TO VWR.COM FOR THE LATEST NEWS,
SPECIAL OFFERS AND DETAILS OF YOUR LOCAL
VWR DISTRIBUTOR
VWR Collection Manual ver 2, rel 1 20.02.2009
VWR Thermometer
INSTRUCTION MANUAL
North American Catalog Number 61161-324
European Catalogue Number 620-2042
Version: 1
Issued: 29, 02, 2012
Legal Address of Manufacturer
United States Europe
VWR International VWR International bvba
1310 Goshen Parkway Researchpark Haasrode 2020
West Chester, PA 19380 Geldenaaksebaan 464
800-932-5000 B-3001 Leuven
http://www.vwr.com + 32 16 385011
http://be.vwr.com
Country of origin - China
Installation
Before using this Thermometer, place your thumb on the ribbed area on the back of the unit and slide the battery cover off. Remove the
red tab so that the battery will make proper contact at the terminals. Replace the battery cover.
Intended use
This item is intended for general laboratory use to monitor temperature and humidity.
Product Specifications
SPECIFICATIONS
Display: 1⅛inch (2.86 cm) LCD
Range— Ambient:23.0 to 122.0 °F (–5.0 to 50.0 °C)
Probe: –58.0 to 158.0 °F (–50.0 to 70.0 °C)
Resolution: 0.1°
Accuracy: ±1°
Sampling Time: 10 seconds
Power: 1 AAA Alkaline Battery
Case: ABS Plastic
Size: 2¾ x 4¼ x ⅝inches
Accessories: sensor bracket, Velcro™, stand, battery, Traceable®Certificate, instructions.
Description of Buttons and Switches / Operational keys
Key Functions Location
RESET Resets the minimum/maximum memory Front
MIN TEMP Displays the minimum temperature Front
MAX TEMP Displays the maximum temperature Front
Operation
1. Turn the thermometer on by inserting the battery. To insert the battery, slide the Battery door located on the back in the direction of
the arrow. Insert the battery as directed by the polarity symbols (+ and -). Replace the Battery Door.
