WB Mfg TORO Table Epoxy Top User manual

wibenchmfg.com 507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
1
Assembly Instructions
Before you begin, please make sure all parts and proper
quantities are included. (See Part Identifier Key) Any parts
damaged during shipment must be reported within 24 hours of
receipt. To report information regarding damages or if you have
any questions, please call 800.242.2303.
TORO Table
Epoxy Top
Step 1:
• Place TORO frame on a protected flat surface.
Step 2:
• If assembling TORO Table with fixed legs, skip to Step 3.
• If assembling TORO Table with adjustable legs, locate
the adjustable leg insert.
• Remove M6 screws and #12 star washers from the
adjustable leg insert using a 4mm hex wrench.
Step 3:
• Place insert into TORO frame. Once desired height is
attained, place M6 screw through #12 star washer and
then through the hole in the fixed leg, tighten with a
4mm hex wrench.
• Repeat with the second M6 screw and star washer.
• Repeat this step for the remaining adjustable leg inserts.
Step 4:
• Turn frame upright with the help of another person.
Step 5:
• Place the top face down on a protected flat surface next
to the completed LOBO frame.
Step 6:
• Make sure frame and top are clean and free from any
debris and/or contamination that would interfere with
adhesion of sealant applied.
Tools Required
• ⁄” wrench
• Polyurethane sealant
Step 3
Step 2
In adhering the tops to the frames, we have found that
using a polyurethane sealant.adhesive works best in this
application. It is recommended to identify an adhevsive
sealant that when fully cured, retains it’s flexibility.
V010322 Version subject to change

wibenchmfg.com 507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
2
Assembly Instructions
Step 7:
• Apply a bead of polyurethane sealant/adhesive
(provided by installer) on the full perimeter of the
frame and manully center frame to top. (There will
NOT be any pre-drilled pilot holes in the epoxy top.)
• DO NOT attempt to use ANY hardware to attach the top
to the frame that is included in the leg packaging.
• Table must cure for 24 HOURS in this position before
continuing to Step 7.
Step 8:
• After letting assembled frame and top cure for 24
hours, turn table upright with the help of another
person.
Step 7
TORO Table
Epoxy Top
Before you begin, please make sure all parts and proper
quantities are included. (See Part Identifier Key) Any parts
damaged during shipment must be reported within 24 hours of
receipt. To report information regarding damages or if you have
any questions, please call 800.242.2303.
TORO Table
Epoxy Top w/Glides
Tools Required
• 4mm hex wrench
• Screw gun
• #S2 square bit
Step 1:
• Remove nylon glide from leg by rotating counter-clockwise until
glide is free.
Step 2:
• Place stem of optional footing into the hole on the leg. Rotate
clockwise until fully inserted into leg.
Step 3:
• Repeat for each glide.

wibenchmfg.com 507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
3
Assembly Instructions
Part # Description Qty.
040164 2.5” Grand Hank glide,⁄ x 1” 1 per leg
04067920 1.5” soft touch glide 1 per leg
NSL-33056S 1.25” steel glide 1 per leg
04067540 Dual wheel soft tread locking casters
(N/A on epoxy resin tops) 1 per leg
04066968
3” Heavy Duty Caster Hardware Pack - Used only with 2” adj. legs (-ALR) (Discard if casters are not installed.)
⁄” star washers (04067460) 4 per set
M6 1x18 screws (04067064) 4 per set
0402020
3” Heavy Duty Caster Hardware Pack - Used only with 1.5” adj. legs (-ADJ) (Discard if casters are not installed.)
⁄” star washers (04067460) 4 per set
M6 1x14 screws (0401259) 4 per set
Caster hardware will be included with frame: Installing casters on tables with epoxy resin tops voids the warranty.
Part Identifier Key
TORO Table
Epoxy Top