weinor Wind Support Manual

We reserve the right to make technical changes.
Item no.: 113197-0000
Wind Support
Maintenance Instructions and
Directions for Use
Wind Support
Attention
Important guidelines for end users
Please read carefully and bear in mind before using!
These instructions must be kept by the end user
Last revised: July 2011

We reserve the right to make technical changes. 2
Wind Support
1Contents
1Contents ................................................................................................................................... 2
2Important Notes / Safety Notes............................................................................................... 3
2.1Safety Notes ...................................................................................................................... 3
2.2Reading the Maintenance Instructions and Directions for Use ..................................... 3
2.3Proper and Safe Use ......................................................................................................... 3
2.4Operation........................................................................................................................... 3
2.5Use in Winds...................................................................................................................... 3
2.6Use in Ice and Snow.......................................................................................................... 4
3Maintenance............................................................................................................................. 4
3.1Cleaning Powder-Coated Aluminium Parts..................................................................... 4
3.2Rectifying Errors/Malfunctions ........................................................................................ 4
4Description of Construction and Function............................................................................. 5
5List of Tools.............................................................................................................................. 5
6Operation.................................................................................................................................. 6
6.1Locking the Wind Support (awning without rain or sun/wind sensor).......................... 6
6.2Locking the Wind Support (awning with rain or sun/wind sensor)................................ 8
6.3Locking the Wind Support in its End Position at the Ball-Shaped Head....................... 9
6.4Replacing the Ball-Shaped Heads.................................................................................. 10
6.5Dismantling the Wind Support (e.g. during the winter season)................................... 11
7Adjusting the Wind Support.................................................................................................. 12
7.1Adjusting the Height of the Wind Support..................................................................... 12
7.2Adjusting the Inclination of the Wind Support.............................................................. 13
8Carrying the wind supports when fitted to a moulded base ....................................................... 14
9Troubleshooting........................................................................................................................ 15
10Other weinor products........................................................................................................... 16

We reserve the right to make technical changes. 3
Wind Support
2Important Notes / Safety Notes
2.1 Safety Notes
Safety notes can be found at the appropriate places in the text. They are marked with a symbol
and a warning text.
Important Safety Note:
This warning triangle marks notes about dangers which could lead to death or seri-
ous injury or which are important for the proper function of the product.
2.2 Reading the Maintenance Instructions and Directions for Use
Please read the operating instructions before using the wind support for the first time. For per-
sonal safety, it is important that these instructions are complied with. All instructions must be kept
by the customer and passed on to the new owner if ownership of the wind support passes to a
third party.
2.3 Proper and Safe Use
Wind supports may only be used to support awnings in winds of up to Force 5 on the
Beaufort scale (= fresh breeze => 8 - 10.8 m/s => 29 - 38km/h => branches of a
moderate size move. Small trees in leaf begin to sway). The supports can also be
used on Paravento side awnings (but not if the moulded base is used).
Awnings that are secured using wind supports must not be left unattended when open. Awnings
with a valance and which are secured using the wind support and valance safety device must not be
fitted with sensors which enable the awning to retract automatically. For more specific information
on this, please consult the maintenance instructions and directions for use.
Alterations such as attaching items or conversions not envisaged by weinor may only be carried
out with weinor's written consent.
Additional loads on the awning or wind supports caused by hanging objects from them or by an-
choring ropes may result in damage or cause the awning to fall and are therefore not permissible.
2.4 Operation
It must be assured that no children or people unable to properly assess the risks of
improper or incorrect use should be able to operate the wind support.
2.5 Use in Winds
Wind supports may only be used to support awnings in winds of up to Force 5 on the Beaufort
scale (= fresh breeze => 8 - 10.8 m/s => 29 - 38km/h => branches of a moderate size move.
Small trees in leaf begin to sway).

We reserve the right to make technical changes. 4
Wind Support
2.6 Use in Ice and Snow
The same terms of use apply as for your weinor awning. Please read the maintenance instruc-
tions and directions for use for further details.
During wintery conditions and snowfalls, and when temperatures fluctuate around freezing point,
you may find snow has settled and/or ice has formed on outer parts or inside the wind support
which may result in the hand knob locking mechanism or the height-adjustable aluminium pipe
freezing and you being unable to use these parts. These are not product deficiencies. To restore
the parts in question to full operability, you will need to free them from any snow and ice in the
proper manner.
3Maintenance
3.1 Cleaning Powder-Coated Aluminium Parts
So that you may enjoy your wind support for many years to come, we recommend that you clean
the aluminium parts at least once a year – and even more often if heavily soiled. To clean, use
clear water and add a few drops of pH-neutral or very slightly alkaline detergent.
3.2 Rectifying Errors/Malfunctions
In general, you should only tackle errors or malfunctions which can be rectified through
maintenance and care. This includes, for example, removing foreign bodies or lubricating
movable parts.
All other defects or malfunctions should only be repaired by a specialist retailer or partner.
Please bear in mind that defects that are not repaired properly will compromise the safety of
your awning system. Call your specialist retailer to book a professional. Your specialist local
retailer will gladly provide you with swift, expert advice.

We reserve the right to make technical changes. 5
Wind Support
4Description of Construction and Function
Wind supports are fitted to the patio flooring in front of a folding arm awning to stabilise the awn-
ing when winds pick up. Connecting elements are fitted to the drop profile on the awning. These
elements can be locked in the wind support if required. Since the wind supports are height-
adjustable, they can be adjusted to the different clearance heights of the awning. The wind sup-
ports are designed for a max. wind load of Force 5 on the Beaufort scale or wind resistance class
2.
Fundamental principle:
Ball-shaped heads can be retrofitted to the awning’s drop profile faceplate.
When the awning opens, the ball-shaped heads retract into the retainer on the stationary wind
support. The wind support needs to be set to the height of the drop profile.
The pipe is secured in place by means of a hand knob.
The drop profile has a height adjustment range of 180 to 220 cm.
The ball-shaped head can be locked in place by turning the round pipe which is located in the
wind support.
5List of Tools
The following tools are required to set and dismantle the wind support:
Tool Size Use
Tools/machines
Allen key Size 3 To install the pole on the ground
Size 5 Adjusting the Inclination of the Wind Support
Open-end spanner Size 8 Replacing the Ball-Shaped Heads
Measuring and testing tools
Tape measure To align the wind support
Folding rule To align the wind support
Spirit level To align the wind support
Plumb-line To align the wind support

We reserve the right to make technical changes. 6
Wind Support
6Operation
The following notes detail how to operate the wind support using the Cassita as an example.
Other weinor awnings are operated in the same way.
6.1 Locking the Wind Support (awning without rain or sun/wind sensor)
The following locking method is only possible on awnings that are not controlled by
an automatic rain or sun/wind sensor.
Open the awning until it reaches the end position (1.) and the ball-shaped head on the awning's
drop profile disappears into the rotating head of the wind support (2.).

We reserve the right to make technical changes. 7
Wind Support
Loosen the hand knob on the wind support (3.), and turn the rotating head approx. 90° (4.). Then
re-tighten the hand knob (5.).

We reserve the right to make technical changes. 8
Wind Support
6.2 Locking the Wind Support (awning with rain or sun/wind sensor)
If the awning is controlled by a rain or sun/wind sensor, the locking mecha-
nism on the wind support can only be locked in the following way. Never leave
the awning unattended. Realign the wind support before opening the awning.
Failing to do this may result in the wind support or awning being damaged!
Open the awning until it reaches the end position (1.) and the ball-shaped head on the awning's
drop profile disappears into the rotating head of the wind support (2.).

We reserve the right to make technical changes. 9
Wind Support
Loosen the hand knob on the wind support (3.), and slide the rotating head upwards (approx.
20mm) until the awning is slightly tensioned against the drop profile (4.). Do not turn the rotat-
ing head during this time. Then re-tighten the hand knob (5.).
Do not lock in the wind support by turning the rotating head!
6.3 Locking the Wind Support in its End Position at the Ball-Shaped Head
To lock the wind support into its end position, repeat the locking steps in reverse order.

We reserve the right to make technical changes. 10
Wind Support
6.4 Replacing the Ball-Shaped Heads
If the wind support is inadvertently left in locked position, the ball-shaped heads will break off un-
der heavy loads (e.g. in very strong winds) to avoid greater damage occurring to the wind support
and awning. To restore the wind support to its original function, the damaged ball-shaped heads
will need to be replaced by new ones.
Turn the ball-shaped head (1.) until it can be removed from its retainer (2.). Then insert the new
ball-shaped head into the retainer (3.) and turn it until it sits firmly in place (4.)

We reserve the right to make technical changes. 11
Wind Support
6.5 Dismantling the Wind Support (e.g. during the winter season)
Wind supports which have been affixed to an assembly base by means of the base plate or
ground sleeve can be dismantled if required, e.g. during the winter season when the awning is
not in use.
The following illustrations show how to dismantle a wind support attached to a base plate. Wind
supports attached to a ground sleeve are dismantled in the same way.
Loosen the four grub screws at the bottom end of the wind support (1.) and detach the entire
wind support from the base plate (2.).
Remove the cover plate (3.), loosen the screw on the adjustable base (4.) and remove the ad-
justable base (5.).

We reserve the right to make technical changes. 12
Wind Support
Place the winter plate onto the base plate (6.) and screw in place (7.).
7Adjusting the Wind Support
7.1 Adjusting the Height of the Wind Support
Adjust the height of the wind support so that the rotating head on the wind support is positioned
at the same height as the ball-shaped heads on the awning's drop profile.
1: Loosen the star knob
2: Slide the aluminium pipe upwards
3: Position the rotating head so it is at the same height as the ball-shaped head on the drop profile
4. Tighten the star knob to hold the aluminium pipe in place

We reserve the right to make technical changes. 13
Wind Support
7.2 Adjusting the Inclination of the Wind Support
Gradients of up to 3° (equivalent to a slope of approx. 52 mm per metre) can be compensated for
by using the adjustment mechanism in the base plate (or ground sleeve, as the case may be).
 - Gradient 3° maximum
Loosen the four grub screws at the bottom end of the wind support (1.) Lift the cover plate (2.)
and the wind support pole until you can see the side opening in the adjustment base (4.) or the
screw in the adjustment base becomes accessible with an Allen key.

We reserve the right to make technical changes. 14
Wind Support
Loosen the fixing screw in the adjustment base (4.) Turn the screws under the adjustment base
(turning in the direction in which the wind support can be tilted) to adjust the angle of the wind
support (5.)
Once the required angle is reached, re-tighten the screw located in the centre of the adjustment
base (4.) and re-tighten the four grub screws at the bottom end of the wind support (1.)
8Carrying the wind supports when fitted to a moulded base
To carry or move the wind supports when fitted to a moulded base, lift by the moulded base. To lift,
take hold of the base by the recessed grips under the moulded base
.

We reserve the right to make technical changes. 15
Wind Support
9Troubleshooting
Error Cause Remedy
Ball-shaped heads on the
awning do not fully travel into
the rotating head of the wind
support
Wind supports are incorrectly posi-
tioned
Check the position of the wind
supports (especially wind sup-
ports with moulded base)
Awning does not open far enough Check the stop on the awning
(see corresponding awnings in-
structions)
Scraping heard when adjust-
ing the height of the wind sup-
port
The star knob has not been loos-
ened enough. The aluminium pipe
scrapes along the star knob when
adjusting the height
Loosen the star knob until it no
longer presses up against the
aluminium pipe

We reserve the right to make technical changes. 16
Wind Support
10 Other weinor products
Interested in learning more about weinor's range of products? Then please contact your local
specialist retailer who will be happy to advise you on selecting the right sun protection unit.
You can also visit us online at: www.weinor.com
For further information, please contact:
weinor GmbH & Co. KG
Mathias-Brüggen-Straße 110
50829 Köln - Ossendorf (Germany)
Hotline: [phone] - 214
Fax: [phone] - 898
E-mail: [email protected]
Internet: www.weinor.com
Window awnings
Conservatory awnings
Folding arm awnings
Lar
g
e