Weslo WLEVEL71710.0 User manual

Model No. WLEVEL71710.0
Serial No. ___________
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this man-
ual
for future reference.
USERʼS MANUAL
100
23
69
18
28
27
86
86
46
26
26
25
5L
10L
22
31
18
31
34
16
16
3
56
49
51
53
1
18
65
67
68 66
47
55
54
20
20
50
18
11
47
53
35
16
11
18
2
11
18
86
35
16
34
45
11
18
20
86
86
52
51
18
31
27
28
49
48
86
86
10R
23
22
19
18
31 5R
25
26
26
30
33
12
18
18
12
81
82
81
78
78
81
81
82
86
44
8743
88
20
92 92
92
92
48
90
39
80
64
63
57
61
24 62
60
59
58
36
24
80
36
40
21
31
31
37
38
37
38
20
94
20
20
4
71
71
72
72
7
7
73
73
14
15
15
14
29
17
32
42
42
41
6
41
74
70
70
41
41
29
17
41 74
41
84
83
19
23
24
13
23
17
19
36
6
19
23
24
41
41
9
32
32
21
75 76
90
8
77
93
93
23
19
17
96
79
28
97
98
99
31
18
31
18
10R
26
26
18
5L
5R
1
21
10L
2
16
16
3
28
27
37
18
31
11
18
16
16
11
18
38
21
9
17
29
32
17
8
19
23
17
28
E
G
19
36 17
23
6L
6R
4
7
R
7 L
14
32
94
29
13
30
42
42
14
15
15
96
98
99
90
18 11
16
16
18
11
2
1
5R
5L
18
11
11
18
16
1
16
3
5R
5L
31
18
10L
18
1
31
18
31
18
10R
26
26
28
96
29
17
14
42
15
42
29
17
7 R
7 L
32
15
14
6 L
6 L
4
E
G
8
23
19
17
I
N
M
E
G
30
F
4
9
1
37
21
74
27
5L
28
21
38
37
21
28
5R
27
21
38
74
6L
6R
Write the serial number in the
space above for reference.
Visit our website
www.iconsupport.eu
QUESTIONS ?
If you have questions, or if there are
missing parts, please contact us:
UK Call:
08457 089 009
From Ireland:
053 92 36102
Website: www.iconsupport.eu
E-mail: [email protected]
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC
Express Way
Whitwood, West Yorkshire
WF10 5QJ
UK

This product should
always be used on a
level surface.
This product is not
intended for
therapeutic use.
Misuse of this machine
may result in serious
injury.
Read user’s manual
prior to use and follow
all warnings and
instructions.
Do not allow children
on or around machine.
User weight must not
exceed 250 pounds.
Replace label if
damaged, illegible,
or removed.
1
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
IMPORTANT PRECAUTIONS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
FEATURES OF THE CONSOLE . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
HOW TO OPERATE THE ELLIPTICAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
HOW TO MEASURE YOUR PULSE . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
MAINTENANCEAND TROUBLESHOOTING. . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
EXERCISE GUIDELINES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
EXPLODED DRAWINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
NOTES . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Last page
WARNING DECAL PLACEMENT
This drawing shows the location(s) of
the warning decal(s). If a decal is miss-
ing or illegible, call the telephone num-
ber on the front cover of this manual
and request a free replacement decal.
Apply the decal in the location shown.
Note: The decal(s) may not be shown
at actual size.

2
IMPORTANT PRECAUTIONS
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or
persons with pre-existing health problems.
2. Use the elliptical only as described in this
manual.
3. It is the responsibility of the owner to ensure
that all users of the elliptical are adequately
informed of all precautions.
4. The elliptical is intended for home use only.
Do not use the elliptical in a commercial,
rental, or institutional setting.
5. Keep the elliptical indoors, away from
moisture and dust. Place the elliptical on a
level surface, with a mat beneath it to protect
the oor or carpet. Make sure that there is at
least 3 ft. (0.9 m) of clearance in the front and
rear of the elliptical and 2 ft. (0.6 m) on each
side.
6. Inspect and properly tighten all parts
regularly. Replace any worn parts
immediately.
7. Keep children under age 12 and pets away
from the elliptical at all times.
8.The elliptical should not be used by persons
weighing more than 250 lbs. (115 kg).
9. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the elliptical. Always wear athletic
shoes for foot protection while exercising.
10. Hold the handlebars or the upper body
arms when mounting, dismounting, or using
the elliptical.
11. The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in
determining heart rate trends in general.
12. The elliptical does not have a freewheel;
the pedals will continue to move until the
ywheel stops. Reduce your pedaling speed
in a controlled way.
13. Keep your back straight while using the
elliptical; do not arch your back.
14. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
WARNING : To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your elliptical before using your elliptical. ICON
assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.

3
BEFORE YOU BEGIN
Thank you for purchasing the WESLO . The el-
liptical provides an array of features designed to
make your workouts at home more effective and
enjoyable.
For your benet, read this manual carefully be-
fore you use the elliptical. If you have questions
after reading this manual, please see the front
cover of this manual. To help us assist you, note
the product model
number and serial number before contacting us.
The model number is WLIVEL86110.0 and the lo-
cation of the serial number decal are shown on the
front cover of this manual.
Before reading further, please familiarize yourself
with the parts that are labeled in the drawing be-
low.

STEP1 Rear stabilizer :
Insert the M10*94 carriage screws (16) through rear stabilzier (2) and rear metal plate of the main frame (1),
then use M10 nylon cap (18) and M10 arc washer (11) to lock it up.
STEP 2 : Front stabilizer
Insert M10*94 carriage screw (16) through the front stabilizer (3) and front metal plate of the main frame (1),
then use M10 nylon cap (18) and M10 arch washer (11) to lock it tight.
4
ASSEMBLY
18 11
16
16
18
11
2
1
5R
5L
18
11
11
18
16
1
16
3

37
21
74
27
5L
28
21
38
37
21
28
5R
27
21
38
74
6L
6R
5
5R
5L
31
18
10L
18
1
31
18
31
18
10R
26
26
STEP 3 Pedals :
Attach the right pedal (10R) on the right pedal tube (5R).
Insert the outer hexagon screw M10*40 (26) through the
pedal and pedal tube. Use M10 at washer (31) and
M10 nylon cap (18) to lock them tight.
Attach the left pedal (10L) on the left pedal tube (5L).
Insert the outer hexagon screw M10*40 (26) through the
pedal and pedal tube. Use M10 at washer (31) and
M10 nylon cap (18) to lock them tight.
STEP 4 Meter Post :
Please adjust the TCD (tension control device) at its
lowest resistance level (Level 1) which enables TCD
upper segment to come out longest. This will help a lot
when you connect the TCD upper and lower segment.
Remove the 2pcs of M8*70 inner hexagon screws (13),
M8 nylon caps (36); 6pcs of M8 spring washers (23);
M8 arch washers (17) and 4pcs of M8*20 screws (19)
which are pre-assembled a the lower part of the meter
post (4).
Move the meter post (4) close to the main frame; con-
nect the upper sensor wire (94) and lower sensor wire
(90).
Finally slide the meter post onto the frame and use the
removed screws, caps, washers to lock them tight.
STEP 5 Lower swing bar and pedal tube :
Use 5MM and 6MM Allen wrench to dis-assmble the
2pcs of M6*20 inner hexagon screws (27), M6*12 inner
hexagon screws (28), lower swing bar axles (74) which
are pre-assembled on the L and R lower siwng bar (5L,
5R)
Insert the swing bar axle (74) into the bottom bushing of
lower swing bar (6L).
Keep the lower swing bar (6L) between the U plate of
the pedal tube. Use the removed M6*20 inner hexagon
screws (27), M6*12 inner hexagon screws (28) to x
them. Finally tighten them rm by the 5MM and 6MM
Allen wrench
Cover this joint part with pedal tube housing 1 (37) and
pedal tube housing 2 (38). Use M10*4 round cross
screw (21) to lock it tight.
NOTE: The lower swing bar (6R) assembly way is
exactly the same as the left one.
100
18
11
11
94
4
13
23
17
19
36
90
23
19
17
96
79

I
N
M
E
G
30
F
4
9
6
28
96
29
17
14
15
29
17
7 R
7 L
32
15
14
6 L
6 L
STEP 6 Upper and lower swing bars
Take the left upper swing bar (7L) close to the left lower
swing bar (6L) and then connect the hand pulse wire1
(96) and the hand pulse wire 2(28)
Insert the left upper swing bar (7L) into the left lower
swing bar (6L); Insert M8*36 inner hexagon screw (29)
through the M8 arch washer (17) and the upper & lower
swig bars. Lock them up with M8 nylon cap (32). Cover
this joint place with swing bar housing 1 (14) and swing
bar housing 2 (15) from front and rear direction. And
nally use M4*35 round cross screw (42) to lock it tight.
NOTE: The right upper swing bar (7R) assembly way is
exactly the as the left upper swing bars.
STEP 7 Handle bar :
Move the handle bar (8) close to the meter post (4);
Insert the hand pulse wire E, G from the handle bar (8)
through the hole on the back side of the meter post; pull
the hand pulse wire E, G out of the top site of the meter
post. Lock the handle bar (8) to the meter post (4) with
M8*20 inner hexagon screw (19), M8 spring washer
(23), M8 arch washer (17).
Connect the hand pulse wire EG, then connect with wire
which come out from computer post(see picB)
- First remove the M8*20 at cross screw (19), M8
spring washer (23) and OD20*ID8.5*1.5T at washer
(17) which were pre-assembled on the round bar (8).
- Attach the round bar to the top site of the meter post
and use the removed screws & washers to lock it up.
STEP 8 Meter :
Remove the M5*12 meter screws (30) which are pre-
assembled on the back side of the meter (9); Connect
the sensor wire F out from the meter post (4) with the
sensor wire I out from meter (9); connect the hand pulse
wire E, G out from meter post with the sensor wire M,
N out from meter. Attach the meter closely to the mete
post and lock them tight with the removed screw.
4
E
G
8
23
19
17

7
FONCTION DE LA CONSOLE
The easy-to-use console features six modes that
provide instant exercise feedback during your
workouts.
The console modes are described below.
Scan (SCAN)—This mode displays the time, speed,
distance, odometer, calorie, and pulse modes, for a
few seconds each, in succession.
Time (TMR)—This mode displays the elapsed time.
Note: If you set a time goal (see step 2), this mode
will display the time remaining in your workout.
Speed (SPD)—This mode displays your pedaling
speed, in kilometers per hour or miles per hour.
Distance (DST)—This mode displays the distance
you have pedaled during your workout, in kilometers
or miles.
Calorie (CAL)—This mode displays the approximate
number of calories you have burned during your
workout.
Pulse (PULSE)—This mode displays your heart rate
when you hold the handgrip pulse sensors.
HOW TO USE THE CONSOLE
Make sure that the console has batteries (see
assembly step 5 on page 7). If there is a sheet of
clear plastic on the face of the console, remove it.
1. Turn on the console
To turn on the console, press any button on the
console or simply begin pedaling.
2. Press the MODE button, :
In order to select the value you want to see during
your workout.
Follow the rectangular indicator below the number
which will tell you where you are (SCAN, TIME,
SPEED, DIST, CAL, Total DIST ou PULSE).
Note : To reset the time, distance, or calorie mode,
, press the MODE button during 3 secondes.
3. Begin pedaling and follow your progress with
the display.
As you exercise, the console will display the
mode(s) that you select. If you have set a workout
goal, a tone will sound for several seconds when
you reach your goal.
4. When you are nished exercising, the console
will automatically turn off.
The console has an “auto-off” feature. If the pedals
do not move and the console buttons are not
pressed for a few minutes, the power will turn off
automatically to save the batteries.
FEATURES OF THE CONSOLE

HOW TO EXERCISE ON THE ELLIPTICAL
EXERCISER
To mount the elliptical exerciser, hold the upper body
arms and step onto the pedal that is in the lowest
position. Then, step onto the other pedal. Push the
pedals until they begin to move with a continuous
motion.
Note: The pedal discs can turn in either direction. It is
recommended that you move the pedal discs in the
direction shown by the arrow;
however, for variety, you may turn the pedal discs
in the opposite direction.
The upper body arms are designed to add upper-
body exercise to your workouts. As you exercise,
push and pull the upper body arms to work your
arms, shoulders, and back. To focus on lower-body
exercise, hold the upper body arms but do not push
or pull them as you exercise.
To dismount the elliptical exerciser, wait until the
pedals come to a complete stop. Note: The elliptical
exerciser does not have a free wheel; the pedals
will continue to move until the ywheel stops.
When the pedals are stationary, step off the highest
pedal rst. Then, step off the lower pedal.
HOW TO USE THE ELLIPTICAL
8

Measure your heart rate if desired.
You can measure you heart rate using either the
handgrip pulse sensor or the optional chest pulse
sensor (see page 23 for information about the
optional chest pulse sensor).
Note: If you hold the handgrip pulse sensor and
wear the chest pulse sensor at the same time, the
console will not display your heart rate accurately.
If there are sheets of clear plastic on the metal
contacts on the handgrip pulse sensor, remove
the plastic. In addition, make sure that your hands
are clean. To measure your heart rate, hold the
handgrip pulse sensor with your palms resting
against the metal contacts. Avoid moving your
hands or gripping the contacts tightly.
When you are nished exercising, the console
will turn off automatically.
If the pedals do not move for several seconds, a
tone will sound and the console will pause.
If the pedals do not move for several minutes and
the buttons are not pressed, the console will turn
off and the display will be reset
9
Contacts
HOW TO MEASURE YOUR PULSE