Westin 46-23995 User manual

1
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service [phone]
www.westinautomotive.com
P.N.: 75-4623995-RevA ECO #: W19-0091 DATE: 11/18/19
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
ITEM QUANTITY DESCRIPTION TOOLS NEEDED
11GRILLE GUARD RATCHET
21 MAX WINCH TRAY ALLEN KEY
31LOWER DRIVER MOUNTING BRACKET 16mm SOCKET
41LOWER PASSENGER MOUNTING BRACKET 17mm SOCKET
51DRIVER INSIDE SUPPORT BRACKET 18mm SOCKET
61PASSENGER INSIDE SUPPORT BRACKET 16mm WRENCH
71DRIVER UPPER STRAP 17mm WRENCH
81PASSENGER UPPER STRAP 18mm WRENCH
92SPACER BLOCK TORQUE WRENCH
MAX WINCH TRAY HARDWARE
10 14 M12 FLAT WASHER (BLACK ZINC) CUTTING TOOL
11 8M12 SPLIT LOCK WASHER (BLACK ZINC)
12 6M12 HEX NUT (BLACK ZINC)
13 6LONG M12 HEX HEAD BOLT CLASS 10.9 (BLACK ZINC)
14 2SHORT M12 HEX HEAD BOLT (BLACK ZINC)
15 4M12 SERRATED FLANGE HEX NUT (BLACK ZINC)
16 4M12 SERRATED FLANGE HEX HEAD BOLT (BLACK ZINC)
GRILLE GUARD HARDWARE
17 6M12 HEX HEAD FLANGE BOLT (BLACK ZINC)
18 12 M12 SERRATED FLANGE HEX NUT (BLACK ZINC)
19 2M10 HEX SOCKET BUTTON HEAD BOLT (BLACK ZINC)
20 2M10 BELLVILLE WASHER (BLACK ZINC)
21 2M10 SERRATED FLANGE HEX NUT (BLACK ZINC)
22 6M12 BELLVILLE WASHER (BLACK ZINC)
23 6M12 HEX SOCKET BUTTON HEAD BOLT (BLACK ZINC)
ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO PREVENT THREAD DAMAGE AND GALLING.
INSTALLATION INSTRUCTIONS
HDX Grille Guard/ MAX Winch Tray
APPLICATION:
2020 Chevrolet Silverado 2500/3500
PART NUMBER:
46-23995, 57-93995

2
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service [phone]
www.westinautomotive.com
P.N.: 75-4623995-RevA ECO #: W19-0091 DATE: 11/18/19
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
PROCEDURE
1. Remove contents from box, verify if all parts listed are present and free from damage.
Carefully read and understand all instructions before attempting installation.
Failure to identify damage before installation could lead to a rejection of any claim.
ITEM 1 ITEM 2
ITEM 3 ITEM 4 ITEM 5 ITEM 6
ITEM 7 ITEM 8 ITEM 9

3
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service [phone]
www.westinautomotive.com
P.N.: 75-4623995-RevA ECO #: W19-0091 DATE: 11/18/19
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
2. Open the hood of the vehicle and remove the plastic cover at the front using a pry tool. See Figure 1.
3. Remove the four bolts holding the grille in place. See Figure 2.
4. Remove 2 bolts attaching wheel well cover to filler panel. See Figure 3.
Fig. 1
Fig. 2
5. Pry off fenders to access the filler panel clips. See Figure 4.
6. Pry filler panel off removing any necessary bolts. See Figure 5.
7. Disconnect any electrical plugs and any bolts still attaching the grill to the vehicle. See Figure 6.
8. Pry remaining clips attaching the grill to the vehicle to remove the grille.
Fig. 3
Fig. 4
Fig. 5
Fig. 6

4
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service [phone]
www.westinautomotive.com
P.N.: 75-4623995-RevA ECO #: W19-0091 DATE: 11/18/19
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
9. Remove 4 upper bumper bolts attaching the bumper to the frame and remove 2 bottom bolts attaching bumper arm to the
frame. See Figure 7 & 8.
10. Remove Bumper.
12
10
11
10
14
13
11
10
5
3
Frame
Fig. 8
Fig. 7 Underneath vehicle
Bolts will be exposed after
removing the grille and lifting
the plastic covering them
11. Locate the lower driver mounting brackets for the MAX winch tray. Using the supplied M12 hardware, loosely install the
mounting brackets on to the frame. Slide the mounting bracket (3) in between the frame. The support bracket (5) goes un-
der the frame. See Figure 9 & 10.
12. Repeat on the passenger side.
Fig. 9
Fig. 10

5
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service [phone]
www.westinautomotive.com
P.N.: 75-4623995-RevA ECO #: W19-0091 DATE: 11/18/19
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
13.
 If you are installing the HDX Grille Guard: Locate the upper support str aps (7) for the gr ille guar d. Loosely r e-
install the front bumper with the upper support straps. Note: Trimming of tow pocket is required. Trim out the tow hook
pockets as necessary for the bracket clearance. The winch mount brackets will slide right through the previously trimmed
tow hook pockets when reinstalling the bumper. Reconnect all electrical connections. The upper factory bumper bolts will
be used for the upper support straps. Measure the distance between the mounting surfaces of the upper straps and ensure it
is about 42.25”. Torque to 50-55 ft-lbs. See Figure 11-13.
 If you are only installing Max Winch Tray: Re-install the front bumper and reconnect all electrical connections. Note:
Trimming of tow pocket is required. Trim out the tow hook pockets as necessary for the bracket clearance.
See Figure 12.
ITEM 7
Factory Bolt
Bumper
42.25 inches
Trim as necessary
Trim as necessary
3
14. REINSTALL FILLER PANEL AND GRILLE IN REVERSE ORDER AS INSTRUCTED.
Fig. 11
Fig. 12
Fig. 13

6
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service [phone]
www.westinautomotive.com
P.N.: 75-4623995-RevA ECO #: W19-0091 DATE: 11/18/19
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
15. Locate the Winch Tray (2) and using the supplied flanged M12 Hardware, loosely assemble the Winch Tray to the mount-
ing brackets. See Figure 14
16. If only installing the MAX Winch Tray: If you ar e installing a winch, do so at this time. Adjust as needed and
torque all hardware as specified: M12 to 50-55 ft-lbs. Winch Tray Install Complete
16
15
3
2
17. If installing the HDX grille guard: Install winch first! Locate the spacer blocks (9) and using supplied M12 har d-
ware, mount the spacer blocks to the winch tray. See Figure 15
21
17
9
2
21
Fig. 14
Fig. 15

7
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service [phone]
www.westinautomotive.com
P.N.: 75-4623995-RevA ECO #: W19-0091 DATE: 11/18/19
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
CARE INSTRUCTIONS
 REGULAR WAXING IS RECOMMENDED. DO NOT USE ANY TYPE OF POLISH OR WAX THAT MAY CONTAIN ABRASIVES.
 STAINLESS STEEL PRODUCTS CAN BE CLEANED WITH MILD SOAP AND WATER. STAINLESS STEEL POLISH SHOULD BE USED TO POLISH SMALL SCRATCHES.
 GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER.
23
22
18
1
9
2
INSTALL COMPLETE
7
19
21
20
1
18. With help, install the Grille Guard over the spacer blocks and previously installed upper support brackets. Using the sup-
plied M12 hardware. See Figures 16 & 17.
19. Align as necessary and torque all hardware as specified: M12 to 50-55 ft-lbs., M10 to 30-35 ft-lbs.
Fig. 16
Fig. 17

8
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service [phone]
www.westinautomotive.com
P.N.: 75-4623995-RevA ECO #: W19-0091 DATE: 11/18/19
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Failure to follow these instructions could lead to death, personal injury, and / or property damage.
WARNING
Failure to follow these instructions could lead to death, personal injury, and / or property damage.
FASTENERS:
All Westin supplied fasteners must be utilized and installed in accordance with the installation in-
structions and apply torque to the specifications as defined. DOUBLE CHECK ALL FASTENERS
BEFORE INITIAL USE, AND PERIODICALLY IN THE FUTURE TO ENSURE PROPER FUNCTION
AND SAFETY.
DRILLING:
Most Westin products do not require drilling for installation. If drilling is defined as required, use
caution when drilling a vehicle. FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN
PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE.
EYE PROTECTION:
ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO
AVOID PERSONAL INJURY.
MAXIMUM TOWING/CARRYING CAPACITY: (if applicable)
The Westin Receiver Hitches will have a visible tow rating label affixed directly on the product.
User should never exceed the vehicle manufacturers maximum tow and weight rating regardless
of the capacity of the hitch. FAILURE TO FOLLOW THESE GUIDELINES WILL VOID THE WESTIN
WARRANTY AND MAY RESULT IN PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL
AS VEHICLE DAMAGE.
FOR CALIFORNIA RESIDENTS ONLY-PROP 65 WARNING:
Some products may contain chemicals such as DEHP, which can cause cancer, birth defects or
other reproductive harm. For more info go to www.p65warnings.ca.gov