Whalen Stetson SMSSDSK Owner's manual

1 | P a g e
Assembly Instructions & User’ s Manual
for
Stetson Writing Desk
Model Number: SMSSDSK
Customer Assistance (spare/replacement parts): 1-866-942-5362
or Email: [email protected]
THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
LOT NUMBER: DATE PURCHASED: / /

2 | P a g e
Table of Contents
Quality Statement ..................................................................................................................................... 3
Important Safety Information ................................................................................................................ 3
Before Assembly ...................................................................................................................................... 3
Care & Use ................................................................................................................................................. 3
Package Contents .................................................................................................................................... 4
Product Information ................................................................................................................................ 4
Components .............................................................................................................................................. 4
Hardware .................................................................................................................................................... 5
Tools ............................................................................................................................................................ 5
Step 1 .......................................................................................................................................................... 6
Step 2 .......................................................................................................................................................... 7
Step 3 .......................................................................................................................................................... 8
Step 4 .......................................................................................................................................................... 9
Troubleshooting ..................................................................................................................................... 10
Care & Use Instructions ....................................................................................................................... 10
Warranty Information ............................................................................................................................ 10

3 | P a g e
Quality Statement
Important Safety Information
 Please read all instructions carefully before assembling this product.
 Where applicable, and for your safety, assembly by an adult is strongly recommended.
 Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
 Hardware may loosen overtime. Periodically check that all connections are tight.
Before Assembly
 Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
 The shipping box can provide an ideal work surface if none is available.
 Use the components and hardware lists below to identify, inventory and separate
each of the hardware and components included.
 To avoid accidentally discarding small components or hardware, do not dispose of
any packaging or contents of the shipping carton until assembly is complete.
 DO NOT USE power tools unless it is explicitly identified in this manual as required
for use during assembly. Power tools can damage the fasteners, hardware and/or
components.
 Do not fully tighten all fasteners / screws until all parts are in place. Failure to follow
these instructions may cause the fasteners / screws to misalign during assembly.
Care & Use
 Use a soft, clean cloth that will not scratch the surface when dusting.
 Use of furniture polish is not necessary. Should you choose to use polish, test first in
an inconspicuous area.
 Using solvents of any kind on your furniture may damage the finish.
 Never use water to clean your furniture as it may cause damage to the finish.
 Liquid spills should be removed immediately. Using a soft, clean cloth, blot the spill
gently. Avoid rubbing.
 Do not place furniture in direct sunlight.

4 | P a g e
Package Contents
Component Description Quantity Component Description Quantity
A Desk Top 1 D Upper Back Stretcher 1
B Left Side Frame 1 E Upper Front Stretcher 1
C Right Side Frame 1 F Lower Back Stretcher 1
Product Information
Dimensions – 40” W x 20.75” D x 31.25” H (101.6cm W x 52.7cm D x 79.3cm H)
Weight Capacity –Desk Top: 90.8 kg / 200 lb
Drawer: 9.1 kg / 20 lb.
Components
Component A
Part No.00SMSSDSK-A
Qty. 1
Component B
Part No.00SMSSDSK-B
Qty. 1
Component C
Part No.00SMSSDSK-C
Qty. 1
Component D
Part No.00SMSSDSK-D
Qty. 1
Component E
Part No.00SMSSDSK-E
Qty. 1
Component F
Part No.00SMSSDSK-F
Qty. 1
A
B
C
D
E
F

5 | P a g e
Hardware
1/4” x 15mm Bolt (H1)
Qty. 20+1 extra
Lock Washer (H2)
Qty. 20+1 extra
Flat Washer (H3)
Qty. 20+1 extra
Tools
Phillips Screwdriver
(Not included)
Hex Wrench (H5) (Included)
Qty. 1

6 | P a g e
Step 1
a) Unpack the units and confirm that you have all hardware and required parts.
b) Orient and fit both Upper Stretchers (D and E) and Lower Back Stretcher (F) onto the U-shaped
brackets on the Left Side Frame (B) with the holes aligned. Fasten them into place with three
15mm Bolts (H1) and the Washers (H2 and H3). Tighten the bolts with the provided hex wrench.
c) Repeat the same procedure to attach the Right Side Frame (C) at the other end.
The metal tabs face inward and are located
at up when the unit is turned upright.
H1
H2
H3
B
C
D
E
F
H2 x 6
H1 x 6
H3 x 6

7 | P a g e
Step 2
a) Insert four 15mm Bolts (H1) with the Washers (H2 and H3) through the metal plates on the
Upper Back Stretcher (D) and securely screw into the threaded sockets on both Side Frames
(B and C).
H1
H2
H3
C
B
D
H2 x 4
H1 x 4
H3 x 4

8 | P a g e
Step 3
a) Position the Desk Top (A) upside down on a level and protected surface as shown.
b) Align the assembled base to the Desk Top (A) properly and insert ten 15mm Bolts (H1) with
Washers (H2 and H3) through the metal tabs and screw into the threaded inserts on the Desk
Top (A).
c) Now, go back and securely tighten all the bolts. Make sure all the parts are tight and there are
no gaps between the parts. This will help keep the unit square.
H1
H2
H3
C
B
D
E
A
H2 x 10
H1 x 10
H3 x 10

9 | P a g e
Step 4
a) Lift the assembled unit upright and position it near the final location.
b) The drawer comes with the handle pre-assembled to the inside of utility drawer. To remove
the handle, unscrew the bolts located on the front of the drawer. Re-install the handle to the
front of the utility drawer with the same bolts.
c) If necessary, adjust the pre-attached floor levelers at the bottom of the side frames (B and C)
to correct the tilting.
A
Floor leveler

10 | P a g e
Troubleshooting
Problem
Possible Cause Prevention / Solution
Tilting / wobbling
Surface not level Adjust the floor levelers
Care & Use Instructions
Care
Do not expose the furniture to direct sunlight, drying heat sources or dampness.
Use products specifically made for cleaning wood. Use a wood conditioning cleaner
that does not contain waxes or silicones (test the product in an invisible location
first).
Use
Periodically check to make certain all components are properly positioned, free
from damage and firmly connected.
Check bolts/screws periodically and tighten them if necessary.
In the event that your furniture is stained or otherwise damaged during use, we
recommend that you call a professional to repair your furniture.
Liquid spills should be removed immediately. Using a soft, clean cloth, blot the
spill gently. Avoid rubbing.
Never use water to clean your furniture as it may cause damage to the finish.
Using solvents of any kind on your furniture may damage the finish.
Warranty Information
This product component has a (1) year guarantee against defects in material and/or workmanship. If you
have any questions regarding the warranty or spare / replacement parts, please call our toll-free number
1-866-942-5362 or email us at [e-mail]
NOTE: Please consider recycling all applicable packaging material.
Whalen Furniture Manufacturing
1578 Air Wing Road, San Diego, CA 92154, USA
8:30 a.m. - 4:30 p.m., PST, Monday to Friday
www.whalenstyle.com