Whalen WSC72-MW-E User manual

Date: 2017-06-13 Rev. 0001-A
Whalen Furniture Manufacturing 1 Factory # HAIOFF
72'' Industrial Metal and Wood Cabinet
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
91.5 cm
36 in
36 po
50.8 cm
20 in
20
po
Customer Service: 1-866-942-5362
English, French and Spanish
Monday - Friday, 8:30 a.m. - 4:30 p.m. PST
(In US, Canada, and Mexico only)
182.9 cm
72 in
72 po
www.whalenfurniture.com
MODEL# WSC72-MW-E

2
1. Please read instructions prior to assembly. Please note that there are recommended tools not included in this package.
2. Verify that there are no missing parts.
3. Keep instructions for future reference.
4. Two people are recommended for assembly.
5. Gently set parts on a flat, smooth surface.
6. For indoor use.
7. Please remove the protective film after assembly complete.
LOAD CAPACITY
Failure to follow these guidelines can result in property damage or personal injuries.
SAFETY note for Sloped
Garage Floor：
Add Wood BLOCK or Plywood
to SHIM and LEVEL the cabinet
properly to prevent from tipping
Entire unit maximum capacity: 272.4 kg / 600 lb
45
.4
kg /
10
0
lb
level
A
A
A
A
A
A
A

3
A--Top Panel x 1
Parts List
C--Right Side Upper Panel x 1
B--Left Side Upper Panel x 1
V
W
B
D
C
E
G
I
F
H
J
K
M
N
O
P
Q
Q
R
S
U
T
A
L
L
L
L

4
I-- Right Door Bottom Panel x 1
J-- Upper Upright x 1
K-- Bottom Upright x 1
D-- Left Side Bottom Panel x 1
H-- Left Door Bottom Panel x 1
M-- Middle Shelf Panel x 1
L-- Shelf x 4
N- Hook x 16
O-- Bottom Panel x 1
P-- Upper Back Panel x 1
Q-- Middle Back Panel x 2
Parts List
E-- Right Side Bottom Panel x 1
F-- Left Door Upper Panel x 1
G-- Right Door Upper Panel x 1

5
Tools Required (not included)
BB- Bolt M6x15mm
x 20+ 2 extra
DD- Bolt M10x20mm
x 30+ 2 extra
CC- Bolt M6x35mm
x 8+ 1 extra
W--Lock Panel
x 4
AA- Bolt M4x12mm
x 28+ 2 extra
JJ- Tipping Restraint
Hardware Kit
x
2
sets
EE- Bolt M4x12mm
x 24+ 2 extra
KK- Touch-up Pen
x 1
X2 X1
FF- Lock & Keys
x 2 set
Parts List
R-- Bottom Back Panel x 1
GG - Nut 3/16”
x 2
S-- Triangle Decorate x 8
T--Stationary Caster x 2
U--Locking Caster x 2
V--Lock-tongue x 2
HH- Screw
M4x15mm x 8
II- Caster Bolt M10x20mm
x 16+ 1 extra

6
Assembly Instructions
B
D
M
Please wait until all steps are completed before fully tightening bolts.
BB- Bolt M6x15mm
x 3
1．
CC- Bolt M6x35mm
x 4
CC BB

7
Assembly Instructions
2．
Please wait until all steps are completed before fully tightening bolts.
CC
BB
BB- Bolt M6x15mm
x 3
CC- Bolt M6x35mm
x 4
M
C
E

8
Assembly Instructions
A
C
B
3．
BB- Bolt M6x15mm
x 8
Please wait until all steps are completed before fully tightening bolts.
BB

9
Assembly Instructions
Please wait until all steps are completed before fully tightening bolts.
4．
BB- Bolt M6x15mm
x 4
BB
D
E
O

10
Assembly Instructions
Please wait until all steps
a
re
completed before fully tightening bolts.
AA- Bolt M4x12mm
x 28
5．
P
Q
Q
R
AA

11
Assembly Instructions
S
DD
Please wait until all steps
a
re
completed before fully tightening bolts.
6. 7. DD- Bolt M10x20mm
x 12
DD- Bolt M10x20mm
x 12
Back
S
DD
Front

12
Assembly Instructions
U
U
T
TII
8.
Please wait until all steps
a
re
completed before fully tightening bolts.
II- Caster Bolt M10x20mm
x 16

13
Assembly Instructions
9.
N
L
L
L
L

14
Assembly Instructions
F
W
HH HH
W
HH
W
I
H
HH
W
G
10.
Please wait until all steps
a
re
completed before
fully tightening bolts.
HH- Bolt M4x15mm
x 8

15
Assembly Instructions
F
H
G
I
EE
Please wait until all steps
a
re
completed before fully tightening bolts.
11. EE- Bolt M4x12mm
x 24

16
Assembly Instructions
K
GG
V
FF
J
GG- Nut 3/16”
x 2
12.
Please wait until all steps
a
re
completed before fully tightening bolts.

17
Assembly Instructions
13. DD- Bolt M10x20mm
x 6
BB- Bolt M6x15mm
x 2
Please wait until all steps
a
re
completed before fully tightening bolts.
J
K
DD
BB

18
Assembly Instructions for Tipping Restraint Hardware Kit
Position the cabinet at the desired location against a wall.
Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach the tip-over restraints to the
unit and the wall, as shown in the illustration.
NOTE: Young children can be seriously injured by tipping furniture. You must install the Tipping Restraint Hardware with the unit to
prevent the unit from tipping, causing any accidents or damage. The tipping restraints are intended only as a deterrent, they are not a
substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to add the extra security of
earthquake restraints, they must be purchased and installed separately.
Anchor
Anchor
Wal
l
Bolt
Screw
Wall

19
Care and Maintenance
1. Use a soft, clean cloth that will not scratch the surface when dusting.
2. Using solvents of any kind on your product may damage the finish.
3. Do not use any harsh abrasives or chemicals to clean any metal surfaces as it may damage the protective coating.
4. Touch-up Pen (GG) has been provided to repair any small nicks or scratches that may occur during assembly or shipping.
LIMITED LIFETIME WARRANTY
This product is warranted to the original purchaser. If there is a failure in this unit due to defects in materials or workmanship, the manufacturer will repair or
replace this item at our discretion without charge. Warranty is void if product has been assembled incorrectly, misused, abused by overloading, altered in
any way or damaged due to accident. This warranty is not transferable and does not cover chipping, flaking, scratches, rust, dents, or other damages to the
surfaces of this product. Responsibility of the manufacturer is limited to repair or replacement of this product. The manufacturer is not responsible for
consequential, incidental, or other damages or losses resulting from product failure.
This warranty is in lieu of all other expressed warranties. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary from state to state.
AUSTRALIA: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.

1WSC72-MW-E-01-TP Top Panel Pcs 21 WSC72-MW-E-21-LC Locking Caster Pcs
2WSC72-MW-E-02-LSUP Left Side Upper Panel Pcs 22 WSC72-MW-E-22-LURBPB Left Upper&Right Bottom Peg Board Pcs
3WSC72-MW-E-03-RSUP Right Side Upper Panel Pcs 23 WSC72-MW-E-23-RULBBPB Right Upper&Left Bottom Peg Board Pcs
4WSC72-MW-E-04-LSBP Left Side Bottom Panel Pcs 24 WSC72-MW-E-24-LT lock-tongue Pcs
5WSC72-MW-E-05-RSBP Right Side Bottom Panel Pcs 25 WSC72-MW-E-25-LP Lock Panel Pcs
6WSC72-MW-E-06-LDUP Left Door Upper Pane Pcs 26 WSC72-MW-E-26-H Hinge Pcs
7WSC72-MW-E-07-RDUP Right Door Upper Pane Pcs 27 WSC72-MW-E-27-M Magnet Pcs
8WSC72-MW-E-08-LDBP Left Door Bottom Panel Pcs 28 WSC72-MW-E-28-H Handle Pcs
9WSC72-MW-E-09-RDBP Right Door Bottom Panel Pcs 29 WSC72-MW-E-29-BM4 Bolt M4x10mm Pcs
10 WSC72-MW-E-10-UU Upper Upright Pcs 30 WSC72-MW-E-30-BM6 Bolt M6x15mm Pcs
11 WSC72-MW-E-11-BU Bottom Upright Pcs 31 WSC72-MW-E-31-BM6 Bolt M6x35mm Pcs
12 WSC72-MW-E-12-S Shelf Pcs 32 WSC72-MW-E-32-HBM10 Hex Bolt M10x20mm Pcs
13 WSC72-MW-E-13-MSP Middle Shelf Panel Pcs 33 WSC72-MW-E-33-SM4 Screw M4x12mm Pcs
14 WSC72-MW-E-14-H Hook Pcs 34 WSC72-MW-E-34-FHBM4 Flat Head Bolt M4x10mm Pcs
15 WSC72-MW-E-15-BP Bottom Panel Pcs 35 WSC72-MW-E-35-TRHK Tipping Restraint Hardware Kit Pcs
16 WSC72-MW-E-16-UBP Upper Back Panel Pcs 36 WSC72-MW-E-36-TP Touch-up Pen Pcs
17 WSC72-MW-E-17-MBP Middle Back Panel Pcs 37 WSC72-MW-E-37-K Key Pcs
18 WSC72-MW-E-18-BBP Bottom Back Panel Pcs 38 WSC72-MW-E-38-LH Lock Head Pcs
19 WSC72-MW-E-19-TD Triangle Decorate Pcs 39 WSC72-MW-E-39-CH Complete Hardware Set
20 WSC72-MW-E-20-SC Stationary Caster Pcs
WSC72-MW-E 72 IN Industrial Metal and Wood Cabinet
IF YOU NEED TO ORDER REPLACEMENT PARTS, PLEASE USE THE LIST BELOW
01 03 02 04 05 06 07 08 09
11
10 12 13 14 15 16
29
17
19
18
20 21
30 31 32 33 36
35 37
22 23 24 25 26 27 28
38
34