Winix ZERO Pro User manual

Model
ZERO Pro
User Manual
WINIX AIR PURIFIER
Use & Care
Guide
•Please read and follow all safetyrulesandinstructions
in this manual beforeoperating.
•The product warranty is printed on the back of this
guide, so please keep it in a safe place for future use.

English
ZERO Pro 2
CONTENTS
5-STAGE AIR PURIFICATION········································································3
CONTROLS ·································································································4
WHERE TO USE···························································································5
INSTALLING THE FILTERS·················································································6
SAFETY AND CAUTIONS ·············································································8
INITIAL OPERATION ···················································································9
AUTO AND SLEEP ·····················································································10
MANUAL MODE, TIMERAND PLASMAWAVE®··························································································11
CHILD LOCK, AIR QUALITY LED ·································································12
FILTER CARE ·····························································································13
PARTICLE SENSOR CARE ··········································································· 17
CLEANING CARE·······················································································18
FREQUENTLY ASKED QUESTIONS ·····························································19
UNIT SPECIFICATIONS ·············································································· 21
PRODUCT WARRANTY ·············································································22
French ································································································24
Spanish·······························································································47
German ······························································································70
Italian·································································································93
▶This product is suitable for 220 - 240 V only.

English
ZERO Pro 3
User Manual
Pre-filter/AOC™ Carbon Filter/
True
HEPA filter with
Cleancel™
(Included with theproduct.)
Product
User Manual
WINIX AIR PURIFIER
Model ZERO Pro (AZPU370-IWB)
Please read and follow all safety
rules a nd inst r uct io ns
Use & Care i n thi s ma n ual before op er at i ng.
Guid e The produc t
5- STAGE AIR PURIFICATION
5
PlasmaWave
4
Cleancel™
(Anti-microbial coated)
3
True HEPA filter
replaceable
2
AOC™
(Advanced Odor Control)
Carbon Filter
replaceable
1
Pre-filter
washable

English
ZERO Pro 4
CONTROLS
Air Outlet Vent
Light Sensor
Detects the amount of
ambient light within
the environment, to
adjust thebrightness
oftheLED indicators.
Reset Button
After replacing a filter,
press the RESET button
for at least 5 seconds.
Timer Indicator
If timer has been set,
the LED light Indicates
the set time of operation.
Child Lock Button
Smart Sensor
Automatically
detects indoorair
quality.
PlasmaWave Indicator
Indicates whether
PlasmaWave is
enabled or disabled.
Press and hold for 3 seconds
to enable or disable the Child
Lock mode. LED light indicates
whether Child Lock mode is
enabled or disabled.
Power Button
Turns the unit on
or off.
PlasmaWave Button
Enables or disables
PlasmaWave .
Timer / Air Quality Button
Press to cycle through and set
desired length of operation
(1hr, 4hr, 8hr, [NO TIMER]).
Check Filter
Indicator
LED light indicates
when it is time to
change the filter.
Mode / Fan Speed Button
Every time the Mode button is
pressed, the Mode LED light will
cycle through the settings. (Auto,
Sleep, Low, Medium,High, Turbo)
Press and hold for 3 seconds to
enable or disable the Air Quality
light.

English
ZERO Pro 5
30~46 cm
30~46 cm
Follow theseinstructions to reduce the risk of serious injury
or death and to reduce risk of damaging the unit.
WARNING
Do not place in excessively humid areas
where unit may become wet.
Do not place below any electrical outlet.
Do not have unit facing into wind or draft.
Do not place near any flammable
materials (aerosols, fuel, gases etc.).
Do not place in an area with excessive
amounts of noxiousgases.
Do not install in any sort of motor or
transport
vehicle(trucks,boats,
ships,
etc.).
Do not place around heatingelements.
Do not use around mist or fumes from
industrial
oil or around large quantities
of
metallic dust.
WHERE TO USE
Allow 30 ~ 46 cm. of space between TVs, radios, and other electronic products
electromagnetic interference from certain electronics may cause product malfunction.
Place indoors away from direct sun light
direct exposure may cause product malfunction or failure.
Only place on hard, flat surfaces
flimsy or slanted surfaces may result in abnormal noise and vibrations.
※ This unit is not intended to be used to preserve documents or in art conservation.

INSTALLING THE FILTERS
English
ZERO Pro 6
• Refer to pages 15 - 18 for detailed information on filter care
and how to replacethem.
Note
This product comes with all of the required filters. The protective plastic wrap must be
removed from the filters before use.
※ Operating the unit without removing the plastic wrap may result in product failure.
※ Unplug and make sure the unit is turned off before installing filters.
※ The unit will automatically power off when front panel is opened.
①Remove the front panel by grasping its
upper edge and gently pulling towards
yourself.
• Toremovethe front panel, the latch at
the lower edge of the panel must be
released from its position.
②Remove the filtersfrom the unit, they are
protected inside a plastic wrap.
③ Remove filters from protective plastic wrap.
• Operating the unit without removing
filters from plasticmaycauseabnormal
noise,deformation, or fireas aresult of
overheating.
Latch

INSTALLING THE FILTERS
English
ZERO Pro 7
This unit
is compatible
with
filter
ITEM: 1712-0093-01
T
FILTER
④Install the filters until they fit securely in
place.
Filters must be installed in this order:
3 ,4 True HEPA filter with Cleancel™ (rear)
2 AOC™ Carbon Filter (middle)
1 Pre-filter (front)
• To install the pre-filter, insert bottom tabs
into the slots on either side of the lower part
of the unit, then rotate upward to insert the
upper tabs into the slots at the top part of
the unit until both sides audibly click into
place.
⑤ Replace the front panel by first inserting
the latch at the bottom edge into the
base of the unit, then rotate the panel
upward toward the top of the unit until it
magnetically snaps closed.
⑥ When to service and replace filters:
Filter Indicator Light When to
service
When to
replace
1 Pre-filter none
Clean once every
14 days Permanent
2 AOC™ Carbon Filter
Clean once every
3 months
Lasts up to
6~12 months
3 ,4 True HEPA filter
with Cleancel™
Can NOT be
WASHED
※ Intervals between filter replacement may vary depending on environment.
※
For optimal use, Pre-filter can be cleaned every 14 days which can extend the life of
other filters.
4 True HEPA
3 filter with
Cleancel™
2 AOCTM
Carbon
Filter
1 Pre-filter

SAFETY AND CAUTIONS
English
ZERO Pro 8
Follow these instructions to reduce the risk of serious
injury or death and to reduce risk of damaging the unit.
WARNING
※If the supply cord is damaged, it must be replaced by a special cord or assembly
available from the manufacturer or its service agent.
※ This appliance is not intended for use by a person (including children) with reduced
physical sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for theirsafety.
※ Children should be supervised to ensure that they do not play with the appliance.
Cord can become damaged by forcefully
bending, pulling, twisting, bundling,
pinching or placing heavy objects on it.
Unplug unit when not in operation for
extended periods oftime.
Do not touch the plug with wet hands.
Do not plug additional appliances into
the same outlet or power supply.
Do not unplug or move the unit while in
operation.
If the unitbecomes submerged in water,
unplugit and contact customer service.
Do not tie or knot power cord when unit
is in operation.
Do not pull on the power cord when
unplugging the unit.
Beforeoperatingthis equipment,carefully readand followthesesafetycautionsand
instructions to avoid damage and ensure safe use.
Ensure filters are inserted before running unit
running unit without filters can shorten the units life and cause electric shock or injury.
Be sure foreign objects are NOT inserted into the vents on the unit
objects can include pins, rods, and coins.
Do not touch any part of the interior of the unit with wet hands
the high voltage may cause electric shock.
Ensure unit intake and outlet vents do not become blocked
blockage may lead to increased internal temperatures causing product failure and
deformation.
Do not use the unit as a step stool or place heavy objects on it
personal injury may occur or product failure and deformation.

INITIAL OPERATION
English
ZERO Pro 9
• During the first 4 minutes of power up, the Air Quality light
will flash as the Smart Sensors measure the air quality in
the
environment, after which normal operation will begin.
Note
• InAuto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
•
When the unit is running, you may hear a chirping or
buzzing
sound. The sound is from large particles passing through
PlasmaWave®, it is normal and does not signify product
failure. To disable PlasmaWave
®
, see page 11.
Note
① Insert the unit plug into an electrical outlet.
• The Control Panel lights will turn on and
off.
② Press the ‘Power’ button.
③Bydefault,whenthe unitfirst powerson, the
mode will be set to Auto with PlasmaWave®
enabled.
• When in Auto Mode the fan speed will
be automatically adjusted according to
the environments airquality.
• PlasmaWave® works to removeharmful
airborne contaminants.

AUTO AND SLEEP
Every time the Mode button is pressed, the Mode LED light will cycle through the
settings. (Auto, Sleep, Low, Medium, High, Turbo)
English
ZERO Pro 10
• When in Auto Mode the fan speed is automatically adjusted
according to the indoor air quality. As the indoor air
quality
improves, the fan speed will automatically be reduced. If
the
indoor air quality decreases the fan speed will
automatically
be increased.
•
When unit is first started, Auto Mode is enabled and set to
Low fan speed.
Note
• When Sleep mode is selected, the fan speed is automatically
set to Low. Fan speed can be changed by pressing the Fan
Speed (Mode) Button.
• WhenSleep Mode is enabled, the Air Quality light is disabled.
Note
1. Auto Mode
Enables Auto operation based on the unit's air quality Smart Sensors.
① Press the Mode button to select Auto mode.
• The mode LED light will indicate when
‘Auto’ mode has been selected, and
operation will begin.
• Each time the Mode button is pressed,
the modes will be cycled. (Auto, Sleep,
Low, Medium, High,Turbo).
2. Sleep Mode
① Press the Mode button to select Sleep mode.
• The mode LED light will indicate when
‘Sleep’ mode has been selected, and
operation in that mode will begin.

MANUALMODE,TIMERANDPLASMAWAVE®
Every time the Mode button is pressed, the Mode LED light will cycle through the
settings. (Auto, Sleep, Low, Medium, High, Turbo)
English
ZERO Pro 11
• When Manual Mode is in use, Auto and Sleep modes are
automatically disabled.
Note
• TheWINIX SMART app will display how much time is
remaining on thetimer.
Note
3. Manual Mode (setting fanspeed)
Users can opt to manually set the fan speed to Low, Medium, High or Turbo.
①Press the Mode button to select the desired
fan speed.
• The mode LED light will indicate the
selected fan speed, andoperation will
begin.
4. Timer
The timer can be set for when you want the unit to run for a specified period of time.
① Select the desired period by pressing the
Timer button.
• The Timer LED light will indicate the
selected length ofoperation.
• Every time theTimer button is pressed
the Timer LED light will cycle through
the settings.
(1hr, 4hr, 8hr, [NO TIMER]).
5. PlasmaWave®
By default, PlasmaWave® is enabled whenever the unit is powered on.
①Press the Plasma button when the power is
on to enable or disable this feature.

CHILD LOCK, AIR QUALITY LED
English
ZERO Pro 12
• When Auto Mode is enabled the Air Quality LED light may or
may not be on, depending on the amount of ambient light
in the room.
•
WhenSleep Mode is activated, the Air Quality Indicator
light
is turned off.
Note
6. Child Lock
This feature prevents children from tampering with the control panel.
① Press and hold the Child Lock button for
3 seconds to enable or disable the feature.
• When the Child Lock indicator is lit, the
feature is enabled.
• When Child Lock is enabled, the
control panel is locked and the settings
cannot be changed.
• To disable, press and hold the Child
Lock button again for 3 seconds.
7. Air Quality LED Light
The Air Quality LED light may be turned on or off.
① To turn the Air Quality LED light on or
off,press and hold theTimer button for
3 seconds.
• When on, the LED light will indicate
thecurrentindoorairquality according
to four levels BLUE (good), GREEN
(average), AMBER(fair),RED (poor).
3 seconds
Air Quality Indicator

FILTER CARE
English
ZERO Pro 13
1. Changing Filters
When the Check Filter indicator LED is on, it is time to replace both theTrue HEPA filter
with Cleancel™ and AOC™ Carbon filters.
Filter Indicator Light When to
service
When to
replace
1 Pre-filter none
Clean once every
14 days
Permanent
2 AOC™ Carbon Filter
Clean once every
3 months
Lasts up to
6~12 months
3 ,4 True HEPA filter
with Cleancel™
Can NOT be
WASHED
※ Intervals between filter replacement may vary depending on environment.
※
For optimal use, Pre-filter can be cleaned every 14 days which can extend the life
of other filters.

FILTER CARE
English
ZERO Pro 14
• For optimal performance,only genuineWinix filters should
be used with this unit.
NOTICE
2. Removing Filters
Ensure the unit is turned off and unplugged before removing filters.
※
The unit will automatically power off when front panel is opened.
①Remove the front panel by grasping its
upper edge and gently pulling towards
yourself.
• Toremovethe front panel, the latch at
the lower edge of the panel must be
released from its position.
② Press the tabs on the top edge to remove
the 1 Pre-filter.
③ First remove the 2 AOC™ Carbon Filter
and then the 3 , 4 True HEPA filter with
Cleancel™ by pulling on the numbered tags
at the top of each filter.
Latch
Tabs

FILTER CARE
English
ZERO Pro 15
3. Filter Assembly andReplacement
Filters shouldbere-installedinthereverseorderof their removal.
① Insert the replacement
3 ,4 True HEPA filter with Cleancel™ (rear)
2 AOC™ Carbon Filter (middle)
• Removetheprotectiveplasticwrapfrom
new filters. Operating the unit without
removing the protective plastic wrap
may cause abnormal noise, deformation,
True HEPA
filter with
Cleancel™
AOC TM
Carbon Filter
orfireas aresult ofoverheating.
② Insert the 1 Pre-filter (front)
• Toinstall thepre-filter, insert bottom
tabs into the slots on either side of
thelower part of the unit, thenrotate
upward to insert the upper tabs into
the slots at the top part of the unit until
both sides audibly click into place.
③ Replace the front panel by first inserting
the latch at the bottom edge into the
base of the unit, then rotate the panel
upward toward the top of the unit until it
magnetically snaps closed.
④ After replacing the filters, turn the power
back on and then use a thin object, such as
a paper clip, to press the RESET switch for
5 seconds.
4
3
2

FILTER CARE
English
ZERO Pro 16
• Donot use benzene, alcohol, or other volatile fluids, which
may cause damage ordiscoloration.
•
The Pre-filter is reusable after cleaning.
•
Do not use hot water over 40°C or volatile fluids such as
paint thinner.
•
After washing the pre-filter, allow itto dry completely in a
wellventilatedarea.Otherwise,itmaydevelopabadodor.
NOTICE
4. Cleaning the Pre-filter
Intervals between filter cleanings may vary depending on the air quality.
①Use a vacuum cleaner or soft brush to clean
the Pre-filter. If it is excessively dirty,wash
with room temperaturewater.
• Use only water, do not use volatile
substances such as alcohol or acetone.
※ If the pre-filter becomes damaged
or in any way needs replacement:
Please contact your local
dealer

PARTICLE SENSOR CARE
English
ZERO Pro 17
Particle Sensors Care
For optimal performance of the Particle Sensor, which detects airborne dust and
ultrafine particles, clean it every two months. Clean it more frequently when the unit is
running in a place with high dust levels.
① Open the Particle Sensor cover.
② Use a damp cotton swab to wipe the lens
and intake area of the Particle Sensor.
• Tocleanthe sensorarea, use only water.
Do not use volatile substances such as
alcohol or acetone.
③ Wipe away any remaining moisture with a
dry cotton swab.
④ Close the Particle Sensor cover.
• The Particle Sensor cover may be
cleaned using a vacuum cleaner.
Lens
Cotton swab

CLEANING CARE
English
ZERO Pro 18
• When cleaning the unit, always unplug the power cord first
and then wait until the unit has cooled off.
•
Never disassemble, repair or modify this unit yourself.
•
Do not use flammable sprays or liquid detergents.
•
Do not allow children to clean or maintain the unit
•
Beforecleaning or maintaining, ensure unit is off and
unplugged.
NOTICE
Cleaning the exterior and interior
Cleaning the exterior
Wipe with a soft damp cloth using room
temperaturewater.Afterwards,wipeitdown
with a clean drycloth.
• Foroptimalperformance,cleanthefront
panel 1-2 times amonth.
Cleaning the interior
Open the front panel and clean the interior with
a vacuum cleaner.
• Foroptimalperformance,cleantheinterior
1-2 times amonth.

FREQUENTLY ASKED QUESTIONS
English
ZERO Pro 19
Problem Check / Actions to take
It does not turn on
at all.
• Is there a poweroutage?
- Check to see if other lights and electrical
equipment are working and try again.
It doesn’t work in
Auto mode.
• Has Auto mode beenselected?
-
Press the Mode button until Auto mode is
selected.
• Is the sensor blocked orclogged?
-
Clear the sensor using a vacuum cleaner. view
page 19.
It vibrates and
makes a lot of
noise.
• Is it running on a slanted surface?
- Move the unit to a hard, flat area of the floor.

FREQUENTLY ASKED QUESTIONS
English
ZERO Pro 20
Problem Check / Actions to take
The power plug
and outlet feel
hot.
• Is the plug securely pluggedin?
- Make sure the plug is properly plugged into the
outlet.
There is a strange
smell.
• Is it being used in a place with a lot of smoke, dust,
or odors?
-
Clean the air intakes on the front sides of the
unit and clean thepre-filter.
-
Contactcustomer service to confirm the exact
cause.
-
Replace theAOC™ Carbon filter andTrueHEPA
filter with Cleancel™.
The product is not
purifying the air
enough.
• Is the Check Filter indicator light on?
- Replace the filters as required.