Winners Only DQ14284 User manual

SOLID TOP BUTTERFLY WITH X BASE TABLE
PARTS LIST
PART NO FIGURE DESCRIPTION Q'TY
Hardware Bag
Table Top
Trestle
Leaf Hinge
Mounting Plate
Glides
Support Leaf
Leg Stretcher
Table Hook
Apron Leaf
Apron Hinge
Support Leaf Hinge
DQ14284-01
DQ14284-13
DQ14284-15
DQ14284-02
DQ14284-05
DQ14284-09
DQ14284-10
DQ14284-12
DQ14284-17
DQ14284-18
DQ14284-20
DQ14284-21
1 pce
1 pce
2 pcs
4 pcs
2 pcs
3 pcs
4 pcs
2 pcs
1 pce
2 pcs
2 pcs
1 pce
MADE IN MALAYSIA
PAGE 1 OF 3
DQ14284
TBSR-11395BC-UNNN
DQ14284-13
DQ14284-15
DQ14284-20
DQ14284-21

HARDWARE PART:
ASSEMBLY :
NOTE: THE UNIT SHOULD BE ASSEMBLED BY 2 OR MORE PEOPLE.
4 pcs Allen Key
1 pc
Wrench
1 pc
Nut
4 pcs Lock Washer
8 pcs Flat Washer
4 pcs JCBB Bolt
4 pcs Flat Washer
(Small)
(Large)
STEP 1
Attach stretcher to the trestle base by inserting the wood dowels into the pre-drilled holes on the trestle base.
Insert JCBB Bolt throught Lock Washer, Flat Washer (Small) and pre-drilled holes of trestle base into the pre-drilled
holes at the end of the stretcher. Tighten the bolts with the supplied Allen Key. Attach Cover Piece to cover the holes.
STEP 2
Position the table top upside down on a smooth. Protective
surface such as carpet. REMOVE AND DISCARD THE
TEMPORARY WOOD STRIP.
STEP 3
Unlock the hooks underneath the table and pull the table top wide open equally from both ends. Align and attach the table top to
the Trestle Base put a Flat Washer (Large), Lock Washer and Nut onto the hanger bolt. Tighten all Nuts with the provided Wrench.
MADE IN MALAYSIA
PAGE 2 OF 3
DQ14284
TBSR-11395BC-UNNN
Unlock Hook
Remove Wood Strip
Table Top
Wrench
Nut
Lock Washer
Flat Washer (Large)
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
Allen Key
JCBB Bolt
Cover Piece
Trestle Base
Wood Dowel
Leg Stretcher
Base Assembly
Flat Washer (Small)
Lock Washer
SOLID TOP BUTTERFLY WITH X BASE TABLE
Hanger Bolt

STEP 4
Lift both leaves from the compartment and flip up the aprons then unfold table leaf and place the leaf on the top surface carefully.
STEP 5
Push table top from both ends to close gap and lock the hooks underneath the table.
TO STORE THE CENTER LEAF WHEN NOT IN USE
Unlock the hooks underneath the table and pull the table top wide open equally from both ends. Flip down the aprons and fold the
center leaf to store within the compartment. Push table top from both ends to close. Lock the hooks underneath the table.
MADE IN MALAYSIA
PAGE 3 OF 3
DQ14284
TBSR-11395BC-UNNN
Flip up apron
Lock Hook
Lock Hook
Flip down Apron
SOLID TOP BUTTERFLY WITH X BASE TABLE
Unlock Hook