Wood Stone WS-GFT-31 User manual

TANDOOR OVENS
Gas-Fired Tandoor Ovens
Round, Square, Octagonal and Barrel Models
TANDOOR 31" AND 35"
WS-GFT-31
WS-GFT-35
WS-GFT-35-CUS (Barrel)
Installation and
Operation Manual
woodstone-corp.com
Revised April 2015
Doc no: M0053.02
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166

2
An ongoing program of product improvement may require us to change
specifications without notice. WS-GFT, Revised April 2015.
Doc no: M0053.02
[email protected] or visit woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166
Tandoor Installation and Operation Manual
TABLE OF CONTENTS
TABLE OF CONTENTS
TANDOOR � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
CAUTIONS AND WARNINGS � � � � � � � � � � � � � � � � � � 4
GFT-31 SPECIFICATIONS � � � � � � � � � � � � � � � � � � � � 5
GFT-35 SPECIFICATIONS � � � � � � � � � � � � � � � � � � � � 6
GFT-35-CUS (BARREL) SPECS � � � � � � � � � � � � � � � � 7
CLEARANCES & VENTING � � � � � � � � � � � � � � � � � � � � 8
BARREL TOE KICK INSTALL� � � � � � � � � � � � � � � � � � � 9
GAS SPECIFICATIONS� � � � � � � � � � � � � � � � � � � � � � 10
OPERATION � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11
LIMITED WARRANTY � � � � � � � � � � � � � � � � � �13

3
An ongoing program of product improvement may require us to change
specifications without notice. WS-GFT, Revised April 2015.
Doc no: M0053.02
[email protected] or visit woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166
Tandoor Installation and Operation Manual
TANDOOR
INSTALLATION AND OPERATION MANUAL FOR THE
WOOD STONE TANDOOR
GAS-FIRED TANDOOR OVEN
WS-GFT-31 (ROUND, SQUARE AND OCTAGONAL),
WS-GFT-35 (ROUND, SQUARE, OCTAGONAL)
AND WS-GFT-35-CUS (BARREL) MODELS
ADDITIONAL COPIES AVAILABLE UPON REQUEST
Square model (shown with
optional utensil rails, pan rail
w/ pans and shelf)
Round modelOctagonal model
Barrel model
TANDOOR

4
An ongoing program of product improvement may require us to change
specifications without notice. WS-GFT, Revised April 2015.
Doc no: M0053.02
[email protected] or visit woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166
Tandoor Installation and Operation Manual
CAUTIONS AND WARNINGS
INSTALLATION AND OPERATING INSTRUCTIONS FOR THE WOOD STONE
GFT-31-(RND, SQR, OCT)-(NG, LP, HLP), GFT-35-(RND, SQR, OCT)-(NG, LP, HLP)
AND GFT-35-CUS-(NG, LP, HLP) TANDOOR OVENS
Wood Stone's Gas-Fired Tandoor ovens have been tested and approved by Intertek Testing Services,
and are ETL listed to ANSI Z83.11b - 2009, CSA 1.8b-2009,
and to NSF/ANSI Standard 4.
WARNING: This product must be installed by a licensed plumber or gas fitter
when installed within the Commonwealth of Massachusetts.
DO NOT THROW THIS MANUAL AWAY
FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or
any other appliance. Also, always keep the area under and around this appliance free and clear of any and all
combustible materials.
It is recommended that this oven be installed, maintained and
serviced by authorized professionals.
IMPORTANT: Consult your local gas supplier for a statement outlining a procedure to be followed in the event you smell gas�
Post the statement in a prominent location�
WARNING: Improper installation, adjustment, alteration, service or maintenance can result in property damage, injury
or death. Read the installation, operation and maintenance instructions thoroughly before installing or servicing this
equipment.
READ ALL INSTRUCTIONS BEFORE INSTALLING AND USING THIS APPLIANCE
Please read this entire manual before you install the oven. Failure to follow instructions may result in property
damage, bodily injury or even death. Contact your local building or fire officials about restrictions and installation
inspection in your area.
ANSI Z83.11b-2009
CSA 1.8b-2009 ANSI/NSF STD 4
RETAIN THIS MANUAL FOR FUTURE REFERENCE
Additional copies of this manual at woodstone-corp�com�
For prompt responses to service/maintenance questions, call us at @ 1-800-988-8103�

5
An ongoing program of product improvement may require us to change
specifications without notice. WS-GFT, Revised April 2015.
Doc no: M0053.02
[email protected] or visit woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166
Tandoor Installation and Operation Manual
REV:
LEGEND:
PART #:
WS-GFT-31-RND
31" Tandoor. All Shapes
General Arrangement
10/14/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-GFT-31_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
GAS INLET: 1/2" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
G
GG
30 3/4"
780mm
30 3/4"
780mm 30 3/4"
780mm
O
12"
300mm
Opening
O
12"
300mm
Opening
O
12"
300mm
Opening
12 3/4"
320mm
31"
790mm
37 3/4"
960mm
6 1/4"
160mm
21 1/2"
550mm
21"
530mm
Plan view (Round)
REV:
LEGEND:
PART #:
WS-GFT-31-RND
31" Tandoor. All Shapes
General Arrangement
10/14/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-GFT-31_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
GAS INLET: 1/2" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
GGG
30 3/4"
780mm 30 3/4"
780mm 30 3/4"
780mm
O
12"
300mm
Opening
O
12"
300mm
Opening
O
12"
300mm
Opening
12 3/4"
320mm
31"
790mm
37 3/4"
960mm
6 1/4"
160mm
21 1/2"
550mm
21"
530mm
Side view (Round)
REV:
LEGEND:
PART #:
WS-GFT-31-RND
31" Tandoor. All Shapes
General Arrangement
10/14/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-GFT-31_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
GAS INLET: 1/2" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
GGG
30 3/4"
780mm 30 3/4"
780mm 30 3/4"
780mm
O
12"
300mm
Opening
O
12"
300mm
Opening
O
12"
300mm
Opening
12 3/4"
320mm
31"
790mm
37 3/4"
960mm
6 1/4"
160mm
21 1/2"
550mm
21"
530mm
Front view (Round)
REV:
LEGEND:
PART #:
WS-GFT-31-RND
31" Tandoor. All Shapes
General Arrangement
10/14/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-GFT-31_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
GAS INLET: 1/2" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
G
G
G
30 3/4"
780mm
30 3/4"
780mm
30 3/4"
780mm
O
12"
300mm
Opening
O
12"
300mm
Opening
O
12"
300mm
Opening
12 3/4"
320mm
31"
790mm
37 3/4"
960mm
6 1/4"
160mm
21 1/2"
550mm
21"
530mm
Plan view (Square)
REV:
LEGEND:
PART #:
WS-GFT-31-RND
31" Tandoor. All Shapes
General Arrangement
10/14/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-GFT-31_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
GAS INLET: 1/2" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
GG
G
30 3/4"
780mm 30 3/4"
780mm
30 3/4"
780mm
O
12"
300mm
Opening
O
12"
300mm
Opening
O
12"
300mm
Opening
12 3/4"
320mm
31"
790mm
37 3/4"
960mm
6 1/4"
160mm
21 1/2"
550mm
21"
530mm
Plan view (Octagonal)
WS-GFT-31 (ROUND, OCTAGONAL AND SQUARE MODELS)
GFT-31 SPECIFICATIONS
Note: Side and front
view dimensions are
the same for the Round,
Square and Octagonal
models�
UTILITY SPECIFICATIONS
Gas: 1/2-inch FNPT gas inlet
40,000 BTU/hr Natural Gas (NG) OR Propane (LP)
Gas type must be specified when ordering� Gas connection should
be made using an approved flexible connector and the unit must be
restrained in accordance with all relevant local and/or national codes�
Gas connection is made beneath unit at rear�
Venting
This appliance must be installed under a Type 1 exhaust hood, in
accordance with all relevant local and national codes, and in a manner
acceptable to the authority having jurisdiction� Please contact Wood
Stone for more detailed information�
Shipping weight:
750 lbs.
Air intake: Do not
facade or cover over

6
An ongoing program of product improvement may require us to change
specifications without notice. WS-GFT, Revised April 2015.
Doc no: M0053.02
[email protected] or visit woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166
Tandoor Installation and Operation Manual
REV:
LEGEND:
PART #:
WS-GFT-35-RND
35" Tandoor. All Shapes
General Arrangement
10/14/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-GFT-35_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
GAS INLET: 1/2" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
G
G
34 3/4"
880mm
O
13"
330mm
Opening
O
13"
330mm
Opening
40 3/4"
1040mm
34 3/4"
880mm
G
O
13"
330mm
Opening
34 3/4"
880mm
14 1/4"
360mm
33 3/4"
860mm
6 1/4"
160mm
24 1/2"
620mm
24 3/4"
630mm
Plan view (Round)
REV:
LEGEND:
PART #:
WS-GFT-35-RND
35" Tandoor. All Shapes
General Arrangement
10/14/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-GFT-35_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
GAS INLET: 1/2" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
G G
34 3/4"
880mm
O
13"
330mm
Opening
O
13"
330mm
Opening
40 3/4"
1040mm
34 3/4"
880mm
G
O
13"
330mm
Opening
34 3/4"
880mm
14 1/4"
360mm
33 3/4"
860mm
6 1/4"
160mm
24 1/2"
620mm
24 3/4"
630mm
Side view (Round)
REV:
LEGEND:
PART #:
WS-GFT-35-RND
35" Tandoor. All Shapes
General Arrangement
10/14/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-GFT-35_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
GAS INLET: 1/2" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
G G
34 3/4"
880mm
O
13"
330mm
Opening
O
13"
330mm
Opening
40 3/4"
1040mm
34 3/4"
880mm
G
O
13"
330mm
Opening
34 3/4"
880mm
14 1/4"
360mm
33 3/4"
860mm
6 1/4"
160mm
24 1/2"
620mm
24 3/4"
630mm
Front view (Round)
REV:
LEGEND:
PART #:
WS-GFT-35-RND
35" Tandoor. All Shapes
General Arrangement
10/14/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-GFT-35_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
GAS INLET: 1/2" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
G G
34 3/4"
880mm
O
13"
330mm
Opening
O
13"
330mm
Opening
40 3/4"
1040mm
34 3/4"
880mm
G
O
13"
330mm
Opening
34 3/4"
880mm
14 1/4"
360mm
33 3/4"
860mm
6 1/4"
160mm
24 1/2"
620mm
24 3/4"
630mm
Plan view (Square)
REV:
LEGEND:
PART #:
WS-GFT-35-RND
35" Tandoor. All Shapes
General Arrangement
10/14/2013 bena
1
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-GFT-35_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
GAS INLET: 1/2" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
G
G
34 3/4"
880mm
O
13"
330mm
Opening
O
13"
330mm
Opening
40 3/4"
1040mm
34 3/4"
880mm
G
O
13"
330mm
Opening
34 3/4"
880mm
14 1/4"
360mm
33 3/4"
860mm
6 1/4"
160mm
24 1/2"
620mm
24 3/4"
630mm
Plan view (Octagonal)
WS-GFT-35 (ROUND, OCTAGONAL AND SQUARE MODELS)
GFT-35 SPECIFICATIONS
Note: Side and front
view dimensions are
the same for the Round,
Square and Octagonal
models�
UTILITY SPECIFICATIONS
Gas: 1/2-inch FNPT gas inlet
40,000 BTU/hr Natural Gas (NG) OR Propane (LP)
Gas type must be specified when ordering� Gas connection should
be made using an approved flexible connector and the unit must be
restrained in accordance with all relevant local and/or national codes�
Gas connection is made beneath unit at rear�
Venting
This appliance must be installed under a Listed Type 1 exhaust hood, in
accordance with all relevant local and national codes, and in a manner
acceptable to the authority having jurisdiction� Please contact Wood
Stone for more detailed information�
Shipping weight:
950 lbs.
Air intake: Do not
facade or cover over

7
An ongoing program of product improvement may require us to change
specifications without notice. WS-GFT, Revised April 2015.
Doc no: M0053.02
[email protected] or visit woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166
Tandoor Installation and Operation Manual
WS-GFT-35-CUS (BARREL MODEL)
GFT-35-CUS (BARREL) SPECS
Plan view
Side view
REV:
LEGEND:
PART #:
001-5031-BRL-3521
3521 - Barrel Tandoor
General Arrangement
4/29/2013 bena
2
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-GFT-35-BRL_General_Arrangement-2.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
120VAC, 2A
GAS INLET: 1/2" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
G
G
16 1/4"
410mm
36 1/2"
920mm
2"
50mm
14 3/4"
370mm
21"
530mm
O
12"
300mm
Opening
35"
890mm
36 1/4"35 1/4"- 920mm900mm-
Height Adjustable
7"
180mm
21 1/2"
550mm
Front view
REV:
LEGEND:
PART #:
001-5031-BRL-3521
3521 - Barrel Tandoor
General Arrangement
4/29/2013 bena
2
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-GFT-35-BRL_General_Arrangement-2.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
120VAC, 2A
GAS INLET: 1/2" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
G
G
16 1/4"
410mm
36 1/2"
920mm
2"
50mm
14 3/4"
370mm
21"
530mm
O
12"
300mm
Opening
35"
890mm
36 1/4"35 1/4"- 920mm900mm-
Height Adjustable
7"
180mm
21 1/2"
550mm
REV:
LEGEND:
PART #:
001-5031-BRL-3521
3521 - Barrel Tandoor
General Arrangement
4/29/2013 bena
2
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-GFT-35-BRL_General_Arrangement-2.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
120VAC, 2A
GAS INLET: 1/2" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
G
G
16 1/4"
410mm
36 1/2"
920mm
2"
50mm
14 3/4"
370mm
21"
530mm
O
12"
300mm
Opening
35"
890mm
36 1/4"35 1/4"- 920mm900mm-
Height Adjustable
7"
180mm
21 1/2"
550mm
UTILITY SPECIFICATIONS
Gas
1/2-inch FNPT gas inlet
40,000 BTU/hr Natural Gas (NG) OR Propane (LP)
Gas type must be specified when ordering� Gas connection should
be made using an approved flexible connector and the unit must be
restrained in accordance with all relevant local and/or national codes�
Gas connection is made beneath the unit at the rear�
Venting
This appliance must be installed under a Listed Type
1 exhaust hood, in accordance with all relevant local
and national codes, and in a manner acceptable
to the authority having jurisdiction� Please contact
Wood Stone for more detailed information�
Shipping weight:
750 lbs.
Air intake: Do not
facade or cover over

8
An ongoing program of product improvement may require us to change
specifications without notice. WS-GFT, Revised April 2015.
Doc no: M0053.02
[email protected] or visit woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166
Tandoor Installation and Operation Manual
Combustible construction overhanging
the appliance should be protected in a
manner acceptable to the authority having
jurisdiction.
Install on a noncombustible floor, or one protected
in a manner acceptable to the authority having
jurisdiction, extending 36 inches in all directions.
1-inch side clearance
to combustible
construction
INSTALLATION CLEARANCES
The Wood Stone gas-fired Tandoor must be installed with at least 1-inch
side clearance to combustible construction� Install the unit on a non-
combustible floor, or one provided with a non-combustible covering
that extends at least 36-inches in all directions� Any combustible
construction above (overhanging) the appliance should be protected in
a manner acceptable to the authority having jurisdiction�
ENCLOSURES
If the appliance is enclosed, provisions should be made so that it can
easily be removed from the enclosure�
VENTING
The Wood Stone gas-fired Tandoor must be installed under an appropriate NFPA 96 approved Type 1 exhaust hood� Refer to local
and/or national codes for hood specification requirements� The hood must be designed for the removal of the combustion products
of gas, as well as the cooking vapors related to the intended use of the oven�
Some jurisdictions may require that the Tandoor be interlocked to the hood ventilation system to prevent operation of the appliance
when the ventilation system is not turned on� If an interlock is required, use an approved gas solenoid (supplied and installed by
others), wired so that the gas supply to the appliance is turned off whenever the ventilation system is turned off�
!WARNING: Do not pack required air space (clearance) with insulation or other materials. When non-
combustible building materials contact the body of the oven, the clearances to combustibles are
transferred to those non-combustibles.
CLEARANCES & VENTING
Shaded area must be left unobstructed for critical
combustion air and easily accessible for removal
of the drip/debris pan and operation of the pilot
safety valve. If this area must be covered, the
cover should be easily removable and heavily
perforated.
INSTALLATION

9
An ongoing program of product improvement may require us to change
specifications without notice. WS-GFT, Revised April 2015.
Doc no: M0053.02
[email protected] or visit woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166
Tandoor Installation and Operation Manual
BARREL TOE KICK INSTALL
1. Place Toe Kick around the base of the
Tandoor� The cut out for the gas supply
should be located to the left of the Control
Box�
2. Position the Front Connector Plate
behind the Control Box and behind
the Toe Kick� The ridge is to the top�
FOR THE GAS CONNECTION, USE RIGID PIPE TO PASS THROUGH THE TOE KICK.
DO NOT INSTALL TOE KICK UNTIL THE BARREL TANDOOR IS LOCATED IN ITS FINAL INSTALLED POSITION.
Gas Supply Cut Out
Toe Kick
Gas Supply
Front
Connector
Plate
Control Box
q
w
e
e
3. Align the Front Connector Plate
and Toe Kick and fasten using the
supplied 1/4-20 x 3/4" Pan Head
screws�
Ridge to top

10
An ongoing program of product improvement may require us to change
specifications without notice. WS-GFT, Revised April 2015.
Doc no: M0053.02
[email protected] or visit woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166
Tandoor Installation and Operation Manual
GAS CONNECTION
The gas connection is made at the lower rear of the appliance. See next page for details.
This appliance (except the barrel model) is equipped with casters; it must be installed using the casters supplied with
a connector complying with ANSI Z21.69 or CAN/CGA 1-6.9 and a quick disconnect device complying with ANSI Z21.41
or CAN 1-6.9. It must also be installed with restraining means to guard against transmission of strain to the connector.
IMPORTANT: The gas supply to this appliance should be equipped with an individual appliance shutoff valve that is
capable of completely isolating the appliance from the main gas supply. This valve should be installed in such a manner
as to be readily accessible to the operator of the appliance.
The Wood Stone gas-fired Tandoor is equipped with a 1/2-inch FNPT connection, located on the underside of the rear of the unit�
Anchor points for the restraining means are provided on the underside of the Tandoor; these are holes punched in the rear portion
of the drip/debris pan rails�
GAS RATINGS
Natural Gas
GFT-31, GFT-35, GFT-35-CUS models
40,000 BTU/hr supply
4�0" W�C� manifold pressure
Propane
GFT-31, GFT-35, GFT-35-CUS models
40,000 BTU/hr supply
10�0" W�C� manifold pressure
THIS APPLIANCE IS NOT FOR USE WITH SOLID FUEL
GAS CODE LIMITATIONS
The installation of this appliance must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code,
ANSI Z223�1, or The Natural Gas Installation Code CAN/CGA-B149�1 as applicable�
The appliance and its individual shutoff valve (supplied by others) must be disconnected from the gas supply piping system during
any pressure testing of that system at test pressures in excess of 1/2 psi (3�45 kPa)�
The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve (supplied by others)
during any pressure testing of the gas supply piping system at test pressure, equal to or less than 1/2 psi (3�45 kPa)�
GAS SPECIFICATIONS