9
Press the frequency knob, switch to the [POW] menu page, then pressing the corresponding
function key, you can enter the transmit power settings.At this point, the power set
on the screen will display Po, press [UP/DOWN] key, you can change the transmission power
value and save it.
3.2.13: Switching between Frequency Mode / Channel Mode
Press the frequency knob to switch the current menu page, then press [V/M].
Press this function key to move between frequency mode and channel mode.
3.2.14: Move current channel to VFO
Press the frequency knob to switch the current menu page, then press [M>V].
The radio will switch to VFO mode, showing information from the current channel.
3.2.15: Save current settings to Memory
In frequency mode, set the frequency, patterns and other information needs to be saved,
press the 【V/M】button, rotate the frequency knob to empty frequency, press the 【MW】,
you will see CH*** will appear in the lower left corner of the display flashes, press
the 【MW】saved.
3.2.16: Delete the current channel
Press the frequency knob to switch the current menu page, then press [MC] toclear the
information stored in the current channel.
3.2.17: Manual / automatic telegraph key
Press the frequency knob to switch the current menu page, then press [KEY].
Choose Manual Key, Automatic Left Hand telegraph key or Automatic Right Handtelegraph
key.
