Yale MC182010B User manual

Models: MC182010B (Locking) and MC182000B (Non-Locking).
Operation: Key operated cylinder locks and unlocks from outside (locking version only). Snib locks and unlocks from inside.
Application: For use with aluminium, uPVC and timber sliding doors.
Fitting instructions: Suitable for new and ideal for replacement installations.
Sliding Door Lock
External Key Locking and Non-Locking
Components
Internal
Handle
Exterior
Handle
Cylinder
(locking
model only)
Cylinder
Retainer
(locking
model only)
Mounting
Screw (a)
Mounting
Screw (b)
Strike
Cover
Screw (e)
Strike
Mounting
Screw (c)
Strike
Mounting
Screw (d)
Lock
Body
Strike
Body
Strike
Cover
(a)
2 x M4x49 Mounting screw – Door stile thickness 40mm-44mm
2 x M4x45 Mounting screw – Door stile thickness 35mm-40mm
2 x M4x40 Mounting screw – Door stile thickness 28mm-34mm
(b) 2 x M4x25 Internal handle mounting screws
(c) 2 x 10Gx8 Strike mounting screws – end fixing
(d) 2 x 8Gx25 Strike mounting screws – side fixing
(e) 1 x 8Gx7.5 Strike cover screw
Mark and drill holes
Align template (cut out from clam card) on the
inside of the door and drill holes as shown.
If replacing an existing lock utilise any existing
holes if possible.
Note: Drill centre hole for locking model only.
Fit exterior handle
Exterior handle should be oriented so finger recesses are
next to the door jamb.
Place cylinder in exterior handle with cylinder tailbar aligned
vertically. Assemble cylinder retainer with ‘5 PIN DOWN’ side
showing.
Place exterior handle on outside of door and hold in place.
Fitting Instructions
Locking Model Only
1
2
Cut cylinder tailbar so it protrudes 10mm inside door.
An ASSA ABLOY Group brand
10mm
62.5mm
62.5mm
Ø 10mm
Ø 10mm
Ø 10mm

Sliding Door Lock
External Key Locking and Non-Locking
An ASSA ABLOY Group brand
Q50130 YALE 0414
Fit exterior handle
Place exterior handle on outside of door and lock body on
inside and hold in place.
Using the appropriate length mounting screws for the door
stile thickness (as detailed in the components section) secure
the lock body to the exterior handle through the door.
Fit strike body - Side Fixing
• Drill 4mm pilot holes centrally in mounting slots
• Fix the strike body to the door jamb using
2 x 10Gx8 screws
• Fit the strike cover and secure using 1 x 8Gx7.5 screw
Direction of
strike fixing
screws
Direction of
strike fixing
screws
Fit strike body - End Fixing
• Punch out the two “knock out” mounting slots in the end of
the strike body.
• Drill 3mm pilot holes centrally in mounting slots
• Fix the Strike body to the door jamb using 2 x 8Gx25 screws
• Fit the Strike Cover and secure using 1 x 8Gx7.5 screw
Fit internal handle
Fit the Internal handle to the Lock body and secure using
2 x M4x25 screw.
Fit strike body
Fit the strike body to the lock body by depressing the
antislam button and flicking the snib so that the lock
beaks protrude and catch the strike.
3
Adjust Strike
The strike can be adjusted vertically by loosening the two
strike mounting screws and moving the strike body up or
down on the mounting slots.
For horizontal adjustment, partially unscrew the strike plate
fixing screws. Adjust the jacking screw height as required and
re-tighten the strike plate fixing screws.
6
5a 5b
4 5
ASSA ABLOY New Zealand Limited
6 Armstrong Road, Albany
Auckland 0632, New Zealand
www.yalelock.co.nz
For customer feedback: [e-mail]
10 Year Warranty
The warranty covers manufacturing defects, standard finishes but excludes plated finishes or finishes exposed to a corrosive
environment. The warranty excludes damage caused by installation contrary to written instructions and incidental or
consequential damage. We recommend regular cleaning with mild detergent.
CYL4: With One Key Security you can use a single key to operate all the locks in your home. This lock can be
supplied keyed alike in any quantity and keyed alike to a variety of ASSA ABLOY locks including most similar
products of other makes. Get one key convenience simply by asking your retailer.
Snib
Antislam
Button
Fixing
Screw
Fixing
Screw
Jacking
Screw
Tip - Use the strike attached to the body
as in 5above as a guide.