Yealink T20P User manual

A press TRAN button to put B on hold, then A can dial the third number C and press TRAN button to
call out. A will turn to hold status, and the LCD will display as Transferred
A will be disconnected from the call. B can talk to C
A will be disconnected from the call. B can talk to C
A press TRAN button to put B on hold, then A can dial the third number C and press the OK or SEND
button to call out
While C is ringing, A hang up or press the TRAN button. Then A will turn to hold status, and the LCD
will display as Transferred
A will be disconnected from the call, when C pick up, B can talk to C
Enter the Call Forward path: MENU->Features->Forward
There are 3 options: Always, Busy and No Answer
Choose one of them, enter the number you want to forward. If you choose "No Answer", you should
also set the “After Ring” option, Then press Save softkey to save the changes
Call Forward
Forward, Call Waiting, DSS Keys,
Key as Send, Hot Line, Anonymous Call, Auto Redial, DND, etc.
sKeypad Lock, Reset
Messages
Directory
Factory, Set Password, Set AES Key, etc.
User can check the status of IP phone: IP address, MAC, Firmware,etc.
If A and B are on a conversation and B may want A to transfer the call to C, three ways could
be used to transfer the call: Blind Transfer, Attended Transfer, and Semi-Attended Transfer.
After C answered it, or A press the MENU buttom to complete the transfer
A press TRAN Button to put B on hold, then A can dial the third number C and press the OK or SEND
button to call out
After C answered it, A and C can have a private conversation without B hearing it, then A press the
TRAN button to complete the transfer
V60.0
You can download the latest user manuals from our website:
http://www.yealink.com/en/download.asp?BigClassName=IP%20Phone

There is an incoming call to the account, or there is a call on hold
The phone is in idle status whether registered/unregistered
The account is active
Steady green
Blinking green
Off
Off
Power on
Steady green
Power off
Blinking green There is an incoming call to the account, or there is a call on mute
Directory
Table 3 Line Keys set to BLF
Off
The monitored account is in idle status
Steady green
Fast Blinking green There is an incoming call to the monitored account
Slow Blinking green The monitored account is on an conversation
Press button during a conversation to mute the current call, the icon will be shown on the LCD,
and the power indication LED will blink
Press again to get the microphone return to normal conversation
and then the corresponding line key will blink
When the call is answered, press the CONF button, the conference call will now include you and the
other two parties
It is inactive as BLF