Yealink W60 Series Manual

Yealink
DECT IP Phone
(W60)
Set-up instructions

Yealink DECT IP Phone (W60)
Set-up instructions
Assemble handset(s) and base.
Assemble your base & all handset(s) by following
the ‘Yealink Quick Start Guide’ included in the W60P
box until you reach the Getting Started section.
You are ready for the next step when all the LED
lights on the base are solid green.
Retrieve device username and password from the self-service portal.
a. Go to the self-service portal:
vodafone.xport.co.nz/mydevice or scan the QR code.
b. Log into the self-service portal using the login details from
your ‘Vodafone One Business Online Portal Login’ email.
c. The device username and password is required for step 5.
Example format:
Device Username: 12000000_0001
Device Password: 123456
Ready to provision.
The device is ready to provision when you
see the following information displayed.
If the Setup screen is not displayed,
press .
1
2
3
IMPORTANT: Please follow the subsequent steps 2-5 carefully.
Note: Administrators may need to select the relevant
User’s device from the Desk phone column ( ).

4
5
Updating...
No
Update Now?
YesCancel
Auto Provision
Password:
****
OK
123
Cancel
Auto Provision
Username:
OK
123
Enter device username and password into the phone.
Have your device username and password ready (from step 2).
Press #to change to number input (123) instead of (ABC).
a. Type in the digits prior to the underscore.
b. To enter the underscore ‘_’, press * on the keypad and the right arrow once.
Type in the remainder of the digits and select the OK soft key.
c. At the password prompt, overwrite the default ****’s by entering in the device
password. Select the OK soft key when completed.
If everything is entered in correctly, you will be prompted to ‘Update Now?’.
Select the Yes soft key. This process may take up to 3 minutes to complete.
*Note: You only need to register one handset as the additional
handsets will automatically be provisioned. If you need to delete a
mistake while typing, press the Del soft key.
Register device.*
Press OK (menu icons will appear), then press 6
(Settings), then 8(System Setting).
Pause until the screen loads, then press 6
(Auto provision), enter this PIN: 0000, and select
the Done soft key. This will bring you to the Auto
Provision menu:

6
Provision Successful
Provisioning successful.
a. The following screen indicates that the
device has been provisioned successfully.*
b. You will know provisioning has been successful
if you can see your username and menu options
displayed on the screen by pressing .
Check out our quick start guides and help videos
on how to use your phone at vodafone.co.nz/vobextras
For FAQs visit vodafone.co.nz/onebusinessfaqs
7Ready to use.
Congratulations, your phone is now ready to use.
Base
Red End Call Key
Keypad
Phone LED
Network LED
Power LED
Soft Keys
Handset
Menu Options
Username
Navigation Cluster
*Note: If you receive an error, the phone may still be provisioning – wait 2 minutes. If successful, the phone will reboot,
indicated by the Network and Phone LEDs on the base turning off. If you enter your details incorrectly, you will be
prompted to re-enter your details.