Yealink T48G User manual

Intermedia Unite
Yealink T48G
Quick Start Guide

2
Welcome to Intermedia Unite.

3
What’s in the box?
Yealink T48G
A. Phone
B. Ethernet Cable
C. Handset Cable
D. Handset
E. Stand
F. Quick Start Guide
G. Power Adapter
D.
E. F. G.
A. B.
C.

4
Guided Setup
Attach Stand
Attach the stand as shown below.
BBB
40
AAA
45
Connect Handset and Optional Headset
Note: Your phone supports wired headsets, including electronic hookswitch (EHS) headsets.
For connection directions, refer to your headset documentation.
EHS PC Internet

5
Connect Cables
Please follow the diagram to install your phone. Once plugged in, the
phone will automatically download its conguration and start to work.
The voicemail box will be functional with a default greeting.
PC Connection (Optional)
Power
Adapter
(DC 5V)
AC Power
Option
PoE (Power over
Ethernet) Option
PC Connection
(Optional) IEEE 802.3af compliant
PoE Hub/Switch

6
Voicemail Box Setup
RECORDING YOUR PERSONAL VOICEMAIL GREETING
1. Press the “Messages” button.
2. Enter the PIN provided to you by your Administrator, followed
by the # key.
3. Select option 3 for personal options.
4. Select option 1 to record your voicemail greeting.
5. Follow the voice prompts to record and check your greeting.
CHANGING THE PIN FROM THE PHONE
1. Press the “Messages” button.
2. Enter the PIN provided to you by your Administrator, followed
by the # key.
3. Select option 3 for personal options.
4. Select option 2 to change your PIN.
5. Enter the new PIN when prompted. Press # when done.

7

8
Commonly Used Features
PLACING OUTGOING CALLS
When the phone is not in use:
1. Pick up the handset or press the “Speakerphone” button.
2. Dial tone will be heard.
When using a headset:
1. Press the “Headset” button to activate headset mode.
2. Dial an extension or telephone number.
When you are already on a call:
1. Press the “Hold” soft key.
2. Press the “NewCall” soft key.
3. Dial an extension or telephone number.
4. Resume the original call by pressing the “Down” arrow key and
pressing the “Resume” soft key.”
ANSWERING AN INCOMING CALL
On the Handset:
• Pick up the handset to answer the call.
On a Headset:
• When a headset is connected, press the “Headset” button to
answer the call.
On Speakerphone:
• Press the “Speaker” button to answer the call.

9
REJECTING AN INCOMING CALL
Press the “Reject” soft key to immediately send the caller to voicemail.
IGNORING AN INCOMING CALL
Press the “Silence” soft key to ignore the incoming phone call.
Note: The caller will continue to hear ringing for the specied amount of
time, dened in the phone’s “No Answer Forwarding” settings.
ENDING A CALL
On a Handset:
• Hang up the handset or press the “More” soft key followed by the
“EndCall” soft key.
On a Headset:
• Press the “EndCall” soft key.
On Speakerphone:
• Press the “Speakerphone” button.
HOLD
Placing a Call On Hold:
• While on a call, press the “Hold” soft key.
Retrieving Calls On Hold:
• Press the “Resume” soft key.

10
TRANSFERRING CALLS
Blind Transfers:
1. While on a call, press the “Transfer” soft key.
2. Dial the desired phone number or extension number.
3. Press the “Transfer” soft key again.
4. The call is automatically transferred.
Attended (Consultative or Warm) Transfers:
1. While on a call, press the “Transfer” soft key.
2. Dial the desired phone number or extension number.
3. Wait for the party to answer to announce that you are transferring a
call to them.
4. Press the “Transfer” soft key to transfer the call.
MUTE
1. To mute the microphone on an active call, press the “Mute” button.
2. To un-mute the microphone, press the “Mute” button again.
VOICEMAIL
1. Press the “Message” button.
2. Enter your PIN when prompted.

11
VOLUME ADJUSTMENT
In-Call Volume:
• While on a call, press the “+” and “-“ buttons to raise or lower
the volume.
Ringer Volume:
• While the phone is not in use, press the “+” or “-“ buttons to adjust
the ringer volume on the phone.
CALL WAITING
While already on a call, and a new call rings in, you will hear a beep tone
emitted by your phone.
To Answer the Second Call:
1. Press the “Answer” soft key to access that call. The rst call will be
placed on hold.
2. Once the second call has ended, resume the original call by pressing
the “Resume” soft key.
To Reject the Second Call:
• Press the “Reject” soft key to immediately send the caller
to voicemail.

12
SPEAKERPHONE
While the phone is not in use:
• Press the “Speakerphone” button to activate the speakerphone
and get dial tone for an outbound call.
While on a call on the handset or headset:
• Press the “Speakerphone” button to continue the current call on
the speakerphone.
While a call on speakerphone is active:
• Press the “Speakerphone” button to hang up the current call.

13
FORWARDING CALLS
1. Press the “Menu” soft key.
2. Press the “Features” soft key.
3. Press the “1” entry.
4. If “Always Forward” is currently disabled, “Always Forward O” will
be displayed.
5. Press on “Always Forward”.
6. Press the “On” button.
7. Press the “Forward to” eld and enter a valid telephone number or
extension.
8. Press the “Save” soft key.
Disabling “Always Forward”:
1. If “Always Forward” is currently enabled, “Always Forward: On” will
be displayed.
2. Press on “Always Forward”.
3. Press the “O” button.
4. Press the “Save” soft key.
“Busy Forward” and “No Answer Forward” can be set in a similar manner.

14
Seamlessly extend the features of your Unite service to your
desktop and your Android or iOS mobile device for free. Receive
your calls, manage your voicemail, and update settings and more.
Visit www.intermedia.net/uniteapps to learn more.
DESKTOP AND MOBILE APPS
U N I T E

www.intermedia.net/knowledgebase/voice
voic[email protected] 1.877.880.0055
We are here to help.
15

*UN-YEALINKT48G-QS-001*
UN-YealinkT48G-QS-001
©2017 Voice Telco Services
121334_HPBX_Guide_T48G_V1_121317