Zamel exta ZIM-12/25 User manual

ZIM-12/25, ZIM-24/12 SWITCHING REGULATOR INSTRUCTION MANUAL

sp.j.
J.W. Dzida, K. Łodzińska
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. [phone], Fax [phone]
www.zamelcet.com,  [email protected]



ی Wersje o napięciach wyjściowych 12
V i 24 V,
ی maksymalny prąd wyjściowy 2000
mA (przy 12 V) oraz 1000 mA (przy
24 V),
ی odporność na stan jałowy,
ی obudowa trzymodułowa,
ی montaż na szynie TH 35.
Switching regulators are designed for
supplying electronic (electric) devices
with DC voltage. They are small, light if
compared to voltage transformer regula-
tors of the same output power and have
very good load regulation. 12 V and 24 V
DC output voltage versions in triple-mod-
ule casings are available.
ZIM - 12/25
Current range: 0 ÷ 2000 mA
Rated current: 2000 mA
Rated power: 24 W
Output voltage: 12 V DC
Output ripple and noise voltage(max): 100 mVpp
ZIM - 24/12
Current range: 0 ÷ 1000 mA
Rated current: 1000 mA
Rated power: 24 W
Output voltage: 24 V DC
Output ripple and noise voltage(max): 140 mVpp
ZIM regulators common parameters
Voltage tolerance: 3 %
Input regulation: 1 %
Load regulation: 1 %
Transient response, rise time: 100 ms, 30 ms
Sustain time: 100 ms
Voltage range: 190 ÷ 260 V~
Frequency range: 50/60 Hz
Efciency: 82 %
Input curren: 0,3 A
Starting current: Cold start 30 A
Protection classi: II
Overvoltage category: II
Pollution level: 2
Operating temperature: -20 ÷ +85 oC
Humidity: 10 ÷ 95 %
Rated ambient temperature: +40 oC
Breakdown voltage: 3 kV AC
Insulation resistance:: 100 MΩ / 500 V DC
EMI - conducted and radiated: According to PN-EN 55022
Current harmonic: According to PN-EN 61000-3-2-3
Dimensions: triple-module 90x53x66 mm
Weight: 170 g
Standard conformity: PN-EN 60950:2002,
PN-EN 61000-4-2,3,4,5,6,11



The device should be
connected to a single-
phase system according
to current standards.
The device connections
will be described in this
manual. Only qualied electricians are
allowed to mount, connect and adjust
the device. It is necessary to read this
manual and know the unit functions
before the device mounting. Do not di-
sassembly the device casing or you will
lose any warranty rights and expose
yourself to the electric shock hazard.
Before mounting operation make sure
of disconnecting the connection wires
from the electric network. Use a cross-
head screwdriver of 3.5 mm diameter to
mount the device. The relay should be
carried, stored and used in an appro-
priate way. Do not mount the device in
case of any device parts lack, damage
or deformation. In case of malfunction
please notify the manufacturer.





1. Disconnect the electric network by
means of an appropriate cut-off, cur-
rent-limiting circuit-breaker or sepa-
rator.
 


3. Mount the  regulator on TH 35
rail.
4. Connect the system leads.
5. In case of surface-mounted version
screw down a protection guard.
6. Connect power supply circuit.


The safety transformer short
circuit protected (directly or in-
directly).
Protection class II.
The ZIM-12/25, ZIM-24/12 switching re-
gulators are members of the ZIM-XX/XX
product family

Rated output current:
24/04 - 400 mA
24/06 - 600 mA
12/08 - 800 mA
24/12 - 1000 mA
12/12 - 1200 mA
12/25 - 2000 mA
Output voltage:
12 - 2 V DC
24 - 24 V DC
Device type
Power teminals (L, N)
Output terminals (-, +)
Power teminals (L, N)
Output terminals (-, +)

The product warranty is for a period of 24 months
Dealer signature & stamp, purchase date
1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product.
2. The manufacturer’s guarantee does not cover any of the following actions:
a) mechanical damage during transport, loading / unloading or under other circumstances,
b) damage caused by incorrect product mounting or misuse,
c) damage caused by unauthorised modications made by the PURCHASER or any third parties to the product or any other devices
needed for the product functioning,
d) damage caused by Act of God or any other incidents independent of the manufacturer.
3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J.
4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation.
5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement or money return.
6. The manufacturer’s guarantee is valid in the Republic of Poland.
7. The PURCHASER’s statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or
otherwise are not affected by this warranty.