CENTRAL RADIO ROLLER BLINDS CONTROLLER SRP-03
MANUAL INSTRUCTION
APPEARANCE
FEATURES
TECHNICAL DATADESCRIPTION
● usedinwiredandwirelesscentral(group)
control of roller blind, sunblind and gate
drives,(electricmotorsof230VAC),
● inputsofwiredrollerblindcentralcontrol,
● integrationwithwiredrollerblindswitches
SRM-10andSRP-01ordevicesofdiffer-
entmanufacturers,
● energy-saving device, possibility of con-
stantwork,
● possibility of cooperation with any roller
blind switch (which is not equipped in
backlightelements),
RadiorollerblindscontrollerSRP-03is
usedtorealisecentralcontrolfunctionof
roller blind drives. The device generates
central control impulses (full opening or
closingofasinglerollerblindoragroup
ofrollerblinds,theimpulseis0,5second
long).SRP-03devicecanbeusedasan
elementofwireless(EXTAFREEsystem
transmitters)orwired(rollerblindswitch-
es) central control - which allows for in-
tegration of wired roller blinds switches
(SRM-10,SRP-01or devicesofdifferent
manufacturers)withwirelessEXTAFREE
controlsystem.
SRP-03
Input(supply)terminals: L,N
Inputratedvoltage: 230VAC
Inputvoltagetolerance: -15÷+10%
Nominalfrequency: 50/60Hz
Nominalpowerconsumption: 0,4W(„stand-by”mode)/0,7W(operationmode)
Transmission: radio868,32MHz
Codingway: unidirectional
Coding: addressingtransmission
Maximumnumberoftransmitters: 32
Range: upto250mintheopenarea
Opticsignallingoftransmitter’soperation: LEDreddiode
Controlterminals: LOCAL/CENTRAL (up), (down)
Rollerblindmotorpowersupplyterminals:
OUT
(up), (down)
Relaycontactparameters:
2NO5A/250V~AC11250VA(voltagecontacts)
Numberofterminalclamps: 6
Sectionofconnectingcables:
0,2÷2,50mm2
Ambienttemperaturerange: -10÷+55oC
Operatingposition: free
Casingmounting: installationcableboxØ60mm
Casingprotectiondegree: IP20(EN60529)
Protectionlevel: II
Overvoltagecategory: II
Pollutiondegree: 2
Surgevoltage: 1kV(EN61000-4-5)
Dimensions: 47,5x47,5x20mm
Weight: 0,039kg
Referencestandard: EN60669,EN60950,EN61000
TheZAMELcompanydevices
whicharecharacterised
withthissigncancooperate
witheachother
Opticsignallingofreceiver’soperation
Programmingpush-button
Centralwiredcontrolterminals
(upwardmovement ,downwardmovement )
Signalcontroloutputterminals
(upwardmovement ,downwardmovement )
Input(supply)terminals(L,N)
VER.003_19.05.2011
Thedeviceisdesignedforsin-
gle-phaseinstallationandmust
beinstalledinaccordancewith
standards valid in a particular
country. The device should be
connected according to the
detailsincludedinthisoperatingmanual.Instal-
lation, connection and control should be carried
outbyaqualiedelectricianstaff,whoactinac-
cordancewiththeservicemanualandthedevice
functions.
In case of casing dismantling an electric shock
mayoccur,andtheguaranteeislostthen.Before
installationmakesuretheconnectioncablesare
not under voltage. The cruciform head screw-
driver3,5mmshouldbeusedtoinstalthedevice.
Impropertransport,storage,anduseofthedevice
inuenceitswrongfunctioning.Itisnotadvisable
toinstalthe device in thefollowingcases: if any
devicepartismissingorthedeviceisdamagedor
deformed.Incaseofimproperfunctioningofthe
devicecontacttheproducer.
CAUTION!
The symbol means selective
collecting of electrical and electronic
equipment.
It is forbidden to put the used
equipment together with other waste
ZAMEL Sp.zo.o.
ul.Zielona27,43-200Pszczyna,Poland
tel.+48(32)2104665,fax+48(32)2108004
