Zeiss Axiocam 208 color User manual

Order Number: 426570-7011-001
User Guide
ZEISS Axiocam 208 color / 202 mono

ZEISS Axiocam 208 color / 202 mono
Original Manual
Carl Zeiss Microscopy GmbH
Carl-Zeiss-Promenade 10
07745 Jena
Germany
[email protected]
www.zeiss.com/microscopy
Carl Zeiss Suzhou Co., Ltd.
Modern Industrial Square 3-B, No. 333
XingPu Road SIP
215126 Suzhou
China
Document Name: ZEISS Axiocam 208 color / 202 mono User Guide
Order Number: 426570-7011-001
Revision: 1
Language: en-US
Effective from: 06/2018
© 2018 This document or any part of it must not be translated, reproduced, or transmitted in any form or by any means, elec-
tronic or mechanical, including photocopying, recording, or by any information or retrieval system. Violations will be prose-
cuted. The use of general descriptive names, registered names, trademarks, etc. in this document does not imply, even in the
absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore
free for general use. Software programs will fully remain the property of ZEISS. No program, documentation, or subsequent up-
grade thereof may be disclosed to any third party, unless prior written consent of ZEISS has been procured to do so, nor may be
copied or otherwise duplicated, even for the customer's internal needs, apart from a single back-up copy for safety purposes.
ZEISS reserves the right to make modifications to this document without notice.

 Content ZEISS
Content
1 Introduction .......................................................................................................... 5
2 General information.............................................................................................. 6
2.1 Explanation warning messages and additional information ..................................... 6
2.2 Text formats and conventions................................................................................. 6
3 Safety .................................................................................................................... 7
3.1 Prevention of hazards ............................................................................................. 7
3.2 Limitation of liability ............................................................................................... 8
3.3 Warranty ................................................................................................................ 8
3.4 Intended use........................................................................................................... 8
3.5 Warning labels........................................................................................................ 8
3.5.1 Position of the warning labels .................................................................... 8
3.5.2 Meaning of the warning labels................................................................... 9
4 Technical data....................................................................................................... 10
4.1 Axiocam 208 color.................................................................................................. 10
4.1.1 Specifications............................................................................................. 10
4.1.2 Spectral sensitivity...................................................................................... 11
4.2 Axiocam 202 mono ................................................................................................ 12
4.2.1 Specifications............................................................................................. 12
4.2.2 Spectral sensitivity...................................................................................... 13
4.3 Applied standards and regulations .......................................................................... 13
4.3.1 Symbols on the camera.............................................................................. 13
4.3.2 Symbols on the adapter ............................................................................. 14
5 Delivery ................................................................................................................. 17
5.1 Axiocam 208 color.................................................................................................. 17
5.2 Axiocam 202 mono ................................................................................................ 17
6 Installing the camera............................................................................................ 18
6.1 Camera layout and accessories ............................................................................... 18
6.1.1 Camera connections .................................................................................. 18
6.1.2 Camera controls......................................................................................... 19
6.1.3 Accessories ................................................................................................ 20
6.2 Mounting the camera to the microscope ................................................................ 22
6.3 Connecting the camera to the power supply........................................................... 23
6.3.1 Powering the camera via microscope ......................................................... 23
6.3.2 Powering the camera via mains supply....................................................... 25
6.4 Connecting the camera to a display (without PC) .................................................... 25
6.5 Connecting the camera to a network...................................................................... 25
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 3

 Content ZEISS
6.5.1 Connecting camera via Ethernet................................................................. 25
6.5.2 Connecting camera via Wi-Fi adapter......................................................... 26
6.6 Connecting the camera to a certified PC ................................................................. 26
6.7 Function indicator signals........................................................................................ 26
7 On Screen Display (OSD) menu............................................................................. 27
7.1 Opening OSD menu................................................................................................ 27
7.2 Home menu............................................................................................................ 27
7.3 Settings menu......................................................................................................... 31
7.3.1 Image Settings menu ................................................................................. 32
7.3.2 Microscope System menu .......................................................................... 34
7.3.3 Operating System menu............................................................................. 36
8 Installing software and drivers ............................................................................ 40
8.1 Installing software on PC ........................................................................................ 40
8.2 Installing software on iPad...................................................................................... 40
9 Acquiring images and videos ............................................................................... 41
9.1 Introduction............................................................................................................ 41
9.2 Basic procedure using operator panel ..................................................................... 41
9.3 Basic procedure using OSD menu............................................................................ 41
9.4 Image acquisition with Labscope / Matscope .......................................................... 42
10 Troubleshooting.................................................................................................... 43
10.1 Camera................................................................................................................... 43
10.2 Labscope / Matscope .............................................................................................. 44
10.3 ZEN software .......................................................................................................... 44
11 Maintenance ......................................................................................................... 46
11.1 Optical system ........................................................................................................ 46
11.2 Cleaning the infrared filter or protective glass ......................................................... 46
12 Disposal and recycling.......................................................................................... 47
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 4

1 Introduction ZEISS
1 Introduction
Welcome to the Axiocam 208 color / Axiocam 202 mono user guide.
These cameras are multi-functional digital CMOS cameras for use in light microscopy applications. To
make it easier for you to set up the camera, please follow the instructions in these chapters step by
step.
Content Chapter Content
About this guide Introduction and overview of this manual.
Safety Important information on the safe handling of the camera.
Read this chapter before unpacking and operating the cam-
era.
Technical data Here you will find your camera's technical data.
Shipment The contents of delivery and optional attachments will be de-
scribed here.
Connecting the camera In this chapter, you will find detailed instructions on connecting
and using the camera.
OSD menu This chapter lists the functions of the On Screen Display (OSD)
menu.
Installing software and drivers Here you will learn how to install the software and camera drivers.
Acquiring images This chapter provides the basics of image acquisition.
Troubleshooting In this chapter, we have listed some solutions to various problems.
If you are still unable to solve your problem, contact ZEISS support.
Maintenance This chapter describes some measures for the maintenance and
care of your camera. In case of greater damage, always contact
ZEISS support.
Disposal and Recycling Important instructions for disposal and recycling.
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 5

2 General information | 2.1 Explanation warning messages and additional information ZEISS
2 General information
2.1 Explanation warning messages and additional information
The safety notes in this document follow a system of risk levels, defined in the following manner:
CAUTION
Risk of personal injury
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate personal injury.
NOTICE
Risk of property damage
NOTICE indicates a property damage message. In addition, NOTICE is used for data loss or cor-
rupt data.
Info
Indicates useful additional information. It helps you to make your daily work easier, but it is op-
tional. There is no risk for personal injury or property damage involved.
2.2 Text formats and conventions
Bold texts
Bold is used for texts within the software like names of GUI elements (e.g. buttons, sections, tools,
menus), buttons on a device, and product names (e.g. MTB 2011).
Font type "Courier"
Used for programming code, e.g. macro code as well as for anything
that you would type literally when programming, including keywords,
data types, constants, method names, variables, class names, and in-
terface names.
Shortcuts and key commands
Shortcuts are written like Crtl+C, meaning you should press Crtl-Key and C-Key simultaneously.
Procedures
The following formats are used for procedures (instructive sequences):
Prerequisite üstands for a condition which must be fulfilled before starting with the action.
1. stands for a single step the user is asked to perform.
Web-Links
Web links appear in blue text. To open the linked website, simply click on the link. Please make sure
you have an internet connection established before opening the web link.
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 6

3 Safety | 3.1 Prevention of hazards ZEISS
3 Safety
3.1 Prevention of hazards
The Axiocam 208 color and Axiocam 202 mono have been manufactured and tested by ZEISS ac-
cording to the regulations specified in CE and has left the manufacturer’s premises in perfect work-
ing order. In order to ensure that this condition is maintained and to avoid any risks when operating
the system, the user must comply with any notes and warnings contained in this manual. The manu-
facturer shall be exempt from statutory liability for accidents should the operator fail to observe the
safety regulations.
CAUTION
Personal Injury
To avoid personal injury, read and adhere to the safety notes below.
4To avoid the risk of fire or explosion, do not use the camera near inflammable liquids or
gases.
4Setup, expansions, re-adjustments, alterations, and repairs must be carried out only by
persons who have been authorized by ZEISS.
4Do not allow any cables, particularly power cords, to trail across the floor, where they can
be snagged by people walking past.
4Protect the cables from excessive heat (e.g. halogen lamps, microscope fluorescence illu-
mination).
4To avoid injuries due to potentially high surface temperatures, do not touch the camera's
surface for a prolonged time.
4Do not position the equipment in a way that makes it difficult to operate or disconnect the
device.
NOTICE
To avoid equipment damage, data loss, or corrupted data, read and adhere to the safety notes
below.
4Protect the camera against mechanical impact. External damage may affect the operation
of inner components.
4Keep chemicals and fluids away from the camera.
4Make sure there is sufficient ventilation of the camera head. Avoid direct exposure to sun-
light and locations near heat sources (radiators, stoves). Overheating can cause noisy im-
ages.
4Use the camera in a clean and dry location.
4Attach all connectors firmly and securely.
4Use only the accessories supplied by ZEISS, when applicable.
4Use only normal microscope cleaning material to clean the camera housing.
4Contact your local ZEISS service organization if a repair is necessary. Do not disassemble
the camera by yourself, otherwise the warranty will be lost.
4Save all your data, such as images, measurement data, archives, reports, forms and docu-
ments, at regular intervals on an external storage medium. Otherwise it cannot be avoided
that access to this data may be lost as a result of operational errors or hardware defects.
ZEISS accepts no liability for consequential damage resulting from insufficient data protec-
tion.
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 7

3 Safety | 3.2 Limitation of liability ZEISS
3.2 Limitation of liability
No warranty shall be assumed by ZEISS during the warranty period if the equipment is operated
without observing the safety regulations. In any such case, ZEISS shall be exempt from statutory lia-
bility for accidents resulting from such operation.
3.3 Warranty
ZEISS shall be exempt from any warranty obligations should the user fail to observe the safety regula-
tions. ZEISS only guarantees the safety, reliability, and performance of the system if the safety notes
are closely observed.
3.4 Intended use
Info
These cameras should only be used for training and research. The images / videos from these
cameras must not be used for the direct generation of diagnostic results.
3.5 Warning labels
All points that may pose special risks are additionally marked by warning labels (pictograms) on the
camera. These warning labels indicate possible dangers. They are part of this instruction manual.
They are to be kept in a clean and legible state. Warning labels that are damaged or no longer clearly
legible must be replaced immediately. Always observe all warning labels on the camera.
3.5.1 Position of the warning labels
1
Fig.1: Warning labels on the camera
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 8

3 Safety | 3.5 Warning labels ZEISS
3.5.2 Meaning of the warning labels
The meaning of each warning label is explained below.
Posi-
tion
Symbol Description
1
Follow the notes in the instruction manual and the
supplied documents.
Tab.1: List of attached Warning Labels
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 9

4 Technical data | 4.1 Axiocam 208 color ZEISS
4 Technical data
4.1 Axiocam 208 color
4.1.1 Specifications
Feature Value
Sensor type Sony CMOS color sensor with back illumination
Number of pixels 3840 (H) x 2160 (V) = 8.3 megapixels
Pixel size 1.85 μm x 1.85 μm
Sensor size Image diagonal 9.33 mm, equivalent to 1/1.7"
Live image frame rate via HDMI (3840x2160) 30 fps (maximal values when using optimal hard-
ware)
Digitization 8bit/pixel
Exposure time range 61 μs to 1 s
Communication/power interface USB 3.0 Type-C, RJ45 (LAN), HDMI, Micro-D inter-
face for power/communication
Optical interface C-Mount adapter
Dimensions (H x W x D) 54mm x 135mm x 97mm
Weight Approximately 650g
Operating systems Microsoft® Windows® 7 SP1 x64 Professional or
Ultimate, Microsoft® Windows® 10 SP1 x64 Pro-
fessional
Certificates CE, RoHS, CSA
Power supply Via Micro-D interface (DC24V, 9W)
Cooling Passive cooling by aluminum cooling fins on the
top plate
Environment conditions for storage and operation +10 °C to +40 °C, max. 75 % relative air humidity
at 35 °C, no condensation, free air circulation,
CATII, pollution degree 2, altitude < 2000m, in-
door use
Environment conditions for transport in packaging -40°C to +70°C, max. 75% relative air humidity
at 35°C
IP code IP20
Order number 426570-9000-000
Info
Computer hardware, operating system, and software may decrease the frame rates. All specifica-
tions are subject to change without notice.
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 10

4 Technical data | 4.1 Axiocam 208 color ZEISS
4.1.2 Spectral sensitivity
Fig.2: Spectral sensitivity of Axiocam 208 color
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 11

4 Technical data | 4.2 Axiocam 202 mono ZEISS
4.2 Axiocam 202 mono
4.2.1 Specifications
Sensor type Sony CMOS mono sensor with global shutter
Number of pixels 1920 (H) x 1080 (V) = 2 megapixels
Pixel size 5.86 μm x 5.86 μm
Sensor size Image diagonal 13.4 mm, equivalent to 1/1.2"
Live image frame rate via HDMI (1920x1080) 30 fps (maximal values when using optimal hard-
ware)
Digitization 8 and 12 bit/pixel
Exposure time range 296 μs to 2 s
Communication/power interface USB 3.0 Type-C, RJ45 (LAN), HDMI, Micro-D inter-
face for power/communication
Optical interface C-Mount adapter
Dimensions (H x W x D) 54mm x 135mm x 97mm
Weight Approximately 650g
Operating systems Microsoft® Windows® 7 SP1 x64 Professional or
Ultimate, Microsoft® Windows® 10 SP1 x64 Pro-
fessional
Certificates CE, RoHS, CSA
Power supply Via Micro-D interface (DC24V, 9W)
Cooling Passive cooling by aluminum cooling fins on the
top plate
Environment conditions for storage and operation +10 °C to +40 °C, max. 75 % relative air humidity
at 35 °C, no condensation, free air circulation,
CATII, pollution degree 2, altitude < 2000m, in-
door use
Environment conditions for transport in packaging -40°C to +70°C, max. 75% relative air humidity
at 35°C
IP code IP20
Order number 426570-9010-000
Info
Computer hardware, operating system, and software may decrease the frame rates. All specifica-
tions are subject to change without notice.
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 12

4 Technical data | 4.3 Applied standards and regulations ZEISS
4.2.2 Spectral sensitivity
Fig.3: Spectral sensitivity of Axiocam 202 mono
4.3 Applied standards and regulations
Observe the generally applicable local and national safety and accident prevention regulations, as
well as the applicable laws and regulations in your country. The camera and its accessories have been
designed, manufactured and tested to comply with the guidelines and specifications as named in the
following. The accordance to the relevant specification is indicated by a respective symbol on the
unit.
4.3.1 Symbols on the camera
Symbol Description
Conforms to:
§EU Directive 2014/34/EU (LVD)
§2014/30/EU (EMC)
§2011/65/EU (RoHS)
Complies with EU Directive 2012/19/EU (WEEE)
CSA certificate mark, conforms to:
§CAN/CSA-C22.2 No. 61010-1-12
§UL Std. No. 61010-1 (3rd edition)
Tab.2: List of attached labels concerning standards and regulations
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 13

4 Technical data | 4.3 Applied standards and regulations ZEISS
4.3.2 Symbols on the adapter
Symbol Description
Compliance of this power supply with FCC Part
15, Class B has been demonstrated with a stan-
dard output load. (The FCC law stipulates that sys-
tem-level testing with the actual system load is re-
quired to demonstrate compliance with the FCC
emission limits.)
Japan: Voluntary Control Council for Interference
(VCCI)
Australia and New Zealand: complies with AN/NZS
60950.1:2011 Inc A1 EN 55032:2012
Book 60335 up to 36volts
Conforms to:
§UL STD. 60950-1
§UL STD. 1310
Certified to:
§CSA STD C22.2 NO.60950-1
§CSA STD.C22.2 NO.223
Conforms to AAMI STD. ES60601-1, IEC
60601-1-11
Certified to CAN/CSA STD.C22.2 NO.60601-1
Limited Power Source
Protected against:
§access to hazardous parts with a wire
§solid foreign objects of a diameter of 1.0mm
and greater
§vertically falling water drops when enclosure
tilted up to 15°
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 14

4 Technical data | 4.3 Applied standards and regulations ZEISS
Symbol Description
Complies to the specifications of directive
2011/65/EU Annex VI (ROHS-2) with amendment
2015/863-EU (ROHS-3)
Fuse inside: T 1.6A 250VAC
Semko S-Mark, certified to:
§IEC 60601-1:2005+A1
§EN 60601-1:2006+A1:2013+A12:2014
§IEC 60601-1-11:2015IEC 60601-1-11:2015
§EN 60601-1-11:2015
§EN
60950-1:2006+A11:2009+A1:2010+A12:2011
+A2:2013
JAPAN TUV R-PSE, certified to:
§J60950-1(H26)
§J55022(H22)
Certified to:
§GB4943.1-2011
§GB9254-2008
§GB17265.1-2012
Complies with:
§Section 301 of Energy Independence and Secu-
rity Act (EISA)
§Energy Star tier 2 (North America)
§ECP tier 2 (China)
§MEPS tier 2 (Australia)
§Code of Conduct (Europe)
Complies with CHINA SJ/T 11364-2014 (with a 30
years’ environmental protection use period)
Ukraine: UKRSepro
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 15

4 Technical data | 4.3 Applied standards and regulations ZEISS
Symbol Description
Complies with:
§ТР ТС 004/2011
§ТР ТС 020/2011
Construction of output connector
CE Mark, tested to comply with:
§EN 55032.2012+AC.2013
§EN 61000-3-2.2014
§EN 61000-3-3.2013
§EN 60601-1-2.2015
§EN 55024.2010
Indoor use only
Equipment protected throughout by double insula-
tion or reinforced insulation
Complies with EU Directive 2012/19/EU (WEEE)
Tab.3: List of attached labels concerning standards and regulations
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 16

5 Delivery | 5.1 Axiocam 208 color ZEISS
5 Delivery
5.1 Axiocam 208 color
Package 1
Order No. 426570-9000-000
§1x Axiocam 208 color
§1x Power & signal cable, camera to microscope stand (compatible with Aixolab 5 and Axio-
scope 5/7/Vario)
§1x Power adapter with country-specific plug (input: 100-240VAC, 50-60Hz, 0.6A; out-
put: 24VDC, 0.75A, 18W)
§1x USB 3.0 cable, Type C to Type A
§1x USB 3.0 flash drive, Type C and Type A
§1x USB hub, Type C
Optional accessory for Labscope connection
Order No. 426570-9100-000
§1x Wi-Fi USB adapter
5.2 Axiocam 202 mono
Package 2
Order No. 426570-9010-000
§1x Axiocam 202 mono
§1x Power & signal cable, camera to microscope stand (compatible with Aixolab 5 and Axio-
scope 5/7/Vario)
§1x Power adapter with country-specific plug (input: 100-240VAC, 50-60Hz, 0.6A; out-
put: 24VDC, 0.75A, 18W)
§1x USB 3.0 cable, Type C to Type A
§1x USB 3.0 flash drive, Type C and Type A
§1x USB hub, Type C
Optional accessory for Labscope connection
Order No. 426570-9100-000
§1x Wi-Fi USB adapter
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 17

6 Installing the camera | 6.1 Camera layout and accessories ZEISS
6 Installing the camera
6.1 Camera layout and accessories
6.1.1 Camera connections
1234
Fig.4: Camera connector panel
Num-
ber
Name Function
1
Micro-D port Power supply and communication
2
USB 3.0 Type-C Camera control and image data transfer
3
Gigabit Ethernet port (RJ45) Communication and image data transfer
4
HDMI port Image data transfer to a certified monitor, TV or projector
Tab.4: Connector elements
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 18

6 Installing the camera | 6.1 Camera layout and accessories ZEISS
6.1.2 Camera controls
234
1
Fig.5: Camera operator panel
Num-
ber
Name Function
1
LED function indicator Please see section Function indicator signals for detail.
2
Camera factory reset but-
ton
Press to reset all parameters to default.
3
Image / video capture but-
ton
Press shortly for capturing an image.
Press for five seconds to start recording a video. Press again
shortly to stop the video recording.
4
OSD menu button Press to open the OSD menu. Press again to close the OSD
menu.
Tab.5: Control elements
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 19

6 Installing the camera | 6.1 Camera layout and accessories ZEISS
6.1.3 Accessories
The following items are required for power supply and use of the ports:
Name Figure Remarks
Power & signal cable, camera
to microscope stand
Connection between camera and compat-
ible microscopes (e.g.: Axioscope
5/7, ;Axiolab 5 power is supplied via mi-
croscope)
Power adapter with country-
specific plug
Power supply from external power socket
if the camera is used with microscopes
other than Axioscope 5/7 or Axiolab 5.
USB 3.0 cable, Type-C to Type-
A
Connection between camera and PC
USB flash drive, Type C Connection to camera for immediate im-
age and video storage
Ethernet cable
(not supplied in package)
Connection between camera and network
or WLAN router
HDMI cable
(not supplied in package)
Connection between camera and monitor,
TV, or projector
USB hub, Type-C Connection between camera and multiple
USB Type-A devices, such as keyboard,
mouse, flash drive, and Wi-Fi adapter
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 20