Zeiss LSM 780 User manual

User Manual
for
Zeiss LSM 780 Airyscan

Shelf Area
Workstation Area
The Workspace
Argon laser power supply CO2control module
Computer interface with Zen
black software. Login user name
and password on monitor.
Touchscreen panel
with focus drive.
Joystick for
stage control
Zeiss LSM 780
microscope
Main power and
laser mode switch
Computer with
Zen software
CO2and temperature
controlled incubator
Temperature control module

Workspace Details
Argon laser key switch - ON Argon laser key switch - OFF
CO2Module
Temp Module
Zeiss LSM 780
microscope
Main switches, argon laser
and components computer
Incubation
Chamber
Laser power control
Up - Run power
Down - Idle power
Main switch
Computer with
Zen software
switch
Components
controlling
computer switch
HXP Lamp
Power and Shutter
Touchscreen panel
with focus drive.
Joystick for
stage control
Airyscan
Module

Switch on Procedure
1. Turn on main switch and computer with Zen software switch.
2. Turn on the computer with Zen software and login using the username and password on the monitor.
3. Once desktop is displayed turn the components controlling computer switch to on.
4. Turn the argon laser key switch to on and turn on the HPX 120 C lamp power supply. The argon laser
requires around 5 minutes to warm up before it can be turned to run power (up position).
5. Launch the Zen (black edition) software.
6. You will be presented with a screen similar to the following.
Follow our video guides for details on using the software.