Zest 4 Leisure Abbey 3 Seater Bench User manual

Assembly Instructions
(W x D x H) 1.68m x 0.73m x 0.73m
Product Name: Abbey 3 Seater Bench
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THESE INSTRUCTIONS
Zest4Leisure
01352 752555 option 1 –[e-mail]
V3-04.15

Abbey 3 Seater Bench Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: 10mm Spanner, Corded / Cordless Drill, Pozi-drive Bit / Screwdriver,
3mm Drill Bit, Tape Measure.
Abbey 3 Seater Bench Pack List
Item Description Quantity
A Armrest 2
B1,B2 Leg Assembly 2
C SeatAssembly 1
D BackAssembly 1
E Fascia 1
Diagonal Bracing 4
Fixings
90mm Coach Screws & Washers 2
70mm Coach Screws & Washers 12
50mm Screws 12
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[email protected]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: 10mm Spanner, Corded/Cordless Drill, Pozi-drive
Bit/Screwdriver, 3mm Drill Bit, Tape Measure.
Abbey 3 Seater Bench is now complete.
1. Position Leg Assembly B1 onto Armrest A ensuring correct orientation of
components (Fig.1). Attach using 2no 70mm Coach Screws & Washers. Repeat
procedure for remaining Leg Assembly B2 and Armrest A.
2. Place Seat Assembly C onto Leg Assembly B1 and attach using 2no 70mm
Coach Screws & Washers (Fig.2). Repeat procedure to attach Leg Assembly B2.
3. Place partly assembled seat in upright position and attach Back Assembly D to
Seat Assembly C using 4no 70mm Coach Screws & Washers (Fig.3a).
Attach Back Assembly D to Armrests A using 2no 90mm Coach Screws –1no
per Armrest (Fig.3b)
4. Position Fascia E as shown in Fig.4 and attach using 4no 50mm Screws.
5. Invert chair assembly and place on a flat surface. Position 2no Diagonal Bracings
to rear of chair and fix into position using 4no 50mm Screws (Fig.5a).
Position and fix remaining 2no Diagonal Bracings as shown in Fig.5b & 5c using
4no 50mm Screws.

www.zest4leisure.co.uk
21
3a 3b
5a
5b 5c
4