Zest 4 Leisure Gloucester Pergola Seat User manual

Assembly Instructions
(W x D x H) 1.35m x 0.80m x 2.14m
Product Name: Gloucester Pergola Seat
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THESE INSTRUCTIONS
Zest4Leisure
01352 752555 option 1 –[e-mail]
V2-08.14

Gloucester Pergola Seat Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit, Tape
Measure.
Gloucester Pergola Seat Pack List
Item Description Quantity
A Seat Support 2
B Post/TrellisAssembly 2
C Back Support 2
D SeatAssembly/BackAssembly 2
E Fascia 1
F Rafter 4
G Rail 2
H Bracing 2
J Trellis Batten 2
K Trellis Infill 2
Fixings
90mm Screws 4
60mm Screws 32
40mm Screws 45
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[email protected]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit,
Tape Measure.
Gloucester Pergola Seat is now complete.
1. Ensure underside of Seat SupportsA are 400mm from base of Post/Trellis
Assemblies and fix in position using 4no 60mm Screws per Seat SupportA
(Fig.1a).
Position Back Supports C as shown in Fig.1b and fix using 2no 60mm Screws per
support.
2. Fix Seat Assembly D to Seat SupportsA using 16no 40mm Screws –8no per
side (Fig.2a).
Fix Back Assembly D to Back Supports C using 16no 40mm Screws –8no per
side (Fig.2b & 2c).
Attach Fascia E to Seat SupportsA using 2no 40mm Screws per side and to Seat
Assembly D using 1no 40mm Screw to centre (Fig.2d).
3. Position Rafters F 155mm from both ends of Rails G and fix using 4no 60mm
Screws - 2 per Rafter (Fig.3a). Space out remaining Rafters F equally (Fig.3b)
and attach using 4no 60mm Screws.
4. Locate Rail/Rafter Assembly into post slots and fix into position using 2no 60mm
screws per post (Figs.4a & 4b).
5. Ensure Post/TrellisAssemblies B are perpendicular to Rails G and attach
Bracings H to back posts using 4no 90mm Screws –2no per Bracing (Fig.5).
6. Position Trellis Battens J to front posts and attach using 4no 60mm Screws –2no
per batten (Fig.6a)
Fix Trellis Infills K to Trellis Battens J and Rail G using 4no 40mm Screws per
Infill (Fig.6b)

www.zest4leisure.co.uk
1b1a
2a 2b
2c
3b
3b3a
2d

www.zest4leisure.co.uk
4b4a
5 6a
6b