Zest 4 Leisure Pot & Store User manual

Assembly Instructions
(W x D x H) 1.03m x 0.625m x 0.875m
Product Name: Pot & Store
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THESE INSTRUCTIONS
Zest4Leisure
01352 752555 option 1–[e-mail]
V2-08.14

Pot & Store Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit.
Pot & Store Pack List
Item Description Quantity
A Back Panel 1
B Side Panel 2
C Front / Door Panel 1
D Mid Shelf Slat 5
E Top Panel 1
Fixings
40mm Screws 4
55mm Screws 12
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed on page 1 of the
Assembly Instructions.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] Option 1 or email:
[e-mail]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill
Bit.
The Pot & Store is now complete.
1. Attach Back Panel (A) to Side Panel (B) using 3no 55mm screws. Repeat
procedure for remaining Side Panel. See Fig 1a & 1b.
2. Position Front Panel (C) ensuring that the side panel rails sit on top of Front /
Door Panel as shown in fig 2a & 2b. Fix together using 6no 55mm screws as
indicated by arrows in Figs 2c and 2d.
3. Loose fit 5no Mid Shelf Slats (D) (no screws required)
4. Fix Top Panel (E) to side panel rails using 4no 40mm screws.

1b1a
2a 2b
2c 2d
www.zest4leisure.co.uk

3a
4a 4b
www.zest4leisure.co.uk