ZKTeco F18 User manual

F18 User Manual
Version: 1.0
Date: Dec. 2011
Introduction:
This document mainly introduces the windows and operations of F18
model of 2.4 Inches color TFT products.

About this manual
1. Not all the devices have the function with ★
. The real product prevails.
2. The photograph in this manual may be different from that of the
real product. The real product prevails.
3. Key functions of various models are different. Please read the key
board instruction in appendix firstly.
4. Due to the constant renewal of products, the company can not
undertake the actual product in consistence with the information in
the document, also any dispute caused by the difference between
the actual technical parameters and the information in this
document. Please forgive any change without notice.

Contents
I
Contents
1. Operating Instruction .............................................................................- 1 -
1.1 Abbreviated Operating Procedures.......................................- 1 -
1.2 Introduction to Fingerprint Recognition technology ............- 2 -
1.3 About Verification Mode ......................................................- 3 -
1.4 Connection with PC............................................................ - 11 -
1.5 Main menu..........................................................................- 13 -
2. User Management................................................................................- 15 -
2.1 Add user..............................................................................- 15 -
2.2 Manage user........................................................................- 19 -
2.2.1 Search user............................................................... - 21 -
2.2.2 Query attendance record..........................................- 21 -
2.2.3 Edit user...................................................................- 22 -
2.2.4 Delete user............................................................... - 24 -
2.2.5 Add user................................................................... - 25 -
2.3 Card management★...........................................................- 25 -
2.3.1 Enroll card ...............................................................- 25 -
2.3.2 Enroll fingerprint card .............................................- 27 -
2.3.3 Clear card information............................................. - 29 -
2.3.4 Copy card information............................................. - 29 -
2.3.5 Set card parameter value..........................................- 30 -
2.4 Access Control Option★....................................................- 32 -
2.4.1 Time Zone Setting....................................................- 33 -
2.4.2 Holidays Setting.......................................................- 34 -
2.4.3 Group time zone setting...........................................- 36 -
2.4.4 Set Unlock Combination..........................................- 39 -
2.4.5 Access Control Parameters ......................................- 41 -
2.4.6 Duress Alarm Parameters.........................................- 42 -

Contents
II
2.4.7 Anti-passback Setting★..........................................- 44 -
3. Communication Option........................................................................- 47 -
3.1 Network option...................................................................- 47 -
3.2 Serial port option★............................................................- 48 -
3.3 Security...............................................................................- 49 -
3.4 Wiegand option★...............................................................- 50 -
3.4.1 Input configuration ..................................................- 51 -
3.4.2 Output configuration................................................- 52 -
4. System Option......................................................................................- 54 -
4.1 System parameters..............................................................- 54 -
4.2 Data management ...............................................................- 56 -
4.3 Upgrade firmware...............................................................- 57 -
4.4 Display Setting ...................................................................- 58 -
4.4.1 Verification ..............................................................- 58 -
4.4.2 Time display.............................................................- 58 -
4.4.3 Picture cycle interval ...............................................- 59 -
4.4.4 Clock display delay..................................................- 59 -
4.4.5 Interface style...........................................................- 59 -
4.5 Reset ................................................................................... - 60 -
4.6 Other options ......................................................................- 61 -
5. Date Time.............................................................................................- 63 -
5.1 Date Time option ................................................................- 63 -
5.2 DLST★..............................................................................- 63 -
6. PenDrive Management ........................................................................- 66 -
6.1 Download data....................................................................- 66 -
6.2 Upload data.........................................................................- 67 -
7. Auto Test..............................................................................................- 69 -
7.1 TFT display test ..................................................................- 69 -
7.2 Audio test............................................................................- 69 -

Contents
III
7.3 Keyboard test......................................................................- 70 -
7.4 Sensor test........................................................................... - 70 -
7.5 Real-time clock...................................................................- 70 -
8. Query Record.......................................................................................- 71 -
9. System Information..............................................................................- 74 -
9.1 Record capacity ..................................................................- 74 -
9.2 Device information.............................................................- 74 -
10. Appendix............................................................................................- 76 -
10.1 Keyboard ..........................................................................- 76 -
10.2 USB ..................................................................................- 79 -
10.3 Quick query of attendance record..................................... - 79 -
10.4 Propaganda picture upload rules.......................................- 80 -
10.5 Card support (ID/EM, MIFARE Card) ★.......................- 81 -
10.6 Web time & attendance ★...............................................- 82 -
10.7 9 Digit Code★..................................................................- 83 -
10.9 Daylight Saving Time★...................................................- 83 -
10.10 Master-slave function ★...............................................- 84 -
10.11About the human rights privacy statement......................- 86 -
10.12 Environmental protection ...............................................- 87 -

Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
- 1 -
1. Operating Instruction
1.1 Abbreviated Operating Procedures
Step 1: Install the device and power it up.
Step 2: Enroll users by registering his/her fingerprints, passwords or
card. Assign users’security privileges directly on the device.
Step 3: After enrolling users, verify that his/her enrolled fingerprint,
passwords or card is valid.
Step 4: Configure the device communication settings. Then download
the users’ newly enrolled information from the device onto the
Attendance Management on the computer. Data can be transmitted via
TCP/IP, RS232, RS485 and USB client or by using a USB flash drive.
Step 5: Modify users’ information in the Attendance Management, and
upload this newly information to the device after connected. Then the
users’ newly information will be displayed on the screen upon
attendance. (Some models allow directly name edition and other
operation on the device. Therefore, it is no necessary to connect device.)
Step 6: Verify the device displays the correct day and time. Then start to
attendance.
Step7: Download attendance records to the Attendance Management
and statistics them at the end of the month.

F18 User Manual V1.0
- 2 -
1.2 Introduction to Fingerprint Recognition technology
Enroll fingerprint by pressing index finger, middle finger or ring finger .
Proper press:
Improper press:
Make finger center pressed
on the sensor window
Slant Too downward
Upright Too lean
Please adopt the correct way to place the finger to avoid improper
operation led to the identification performance degradation.

Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
- 3 -
1.3 About Verification Mode
When the device is on initial interface, only after successful fingerprint or
password or Card verification, user can save attendance record on the device.
Initial Interface (As shown below):
Notice:
1) If the device have ID module, so Interface of Matrix and Magic style
can be displayed "Press fingerprint or punch card". When have not ID
module, it can be displayed "Please Press fingerprint" only.
2) The device has three interface styles for option. Each style displayed
different contents on the screen. For details please refer to 4.4 Display Setting.
3)As above the "Name" of screen, you can edit different names can be
executed by "Access Control Management Software ".
Fingerprint Matching

F18 User Manual V1.0
- 4 -
(1) 1:N fingerprint matching
Verify the fingerprint pressed on the sensor at present with all
fingerprint data in the fingerprint reader.
Step 1: Press fingerprint properly on the sensor on initial interface.
Step 2: If device says ‘Thank you”, the verification is completed.
If device says “Please press again”, and displayed "Verify fail" on the screen.
Return Step 1 for the second operation.

Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
- 5 -
(2) 1:1 fingerprint match（User ID＋fingerprint)
Verify the fingerprint pressed on the sensor at present with the
fingerprint related with user number. Use this method when it is difficult
to identify user’s fingerprint.
Step 1: Input User ID of employee to be verified on initial interface.
Step 2: Press fingerprint properly on the sensor.

F18 User Manual V1.0
- 6 -
Step 3: If device says ‘Thank you”, the verification is completed.
Notice:
If device says “Please press again”, return Step 2 for the second operation.

Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
- 7 -
If device says “Error ID”, that means you input ID number is wrong, please
return Step 1 for the second operation.
Password Matching
Step 1: Input User ID of employee to be verified on initial interface.
Then press OK.
Step 2: If it says that the enroll number is wrong, it means that there is
no such number or the employee does not enroll password.

F18 User Manual V1.0
- 8 -
Step3: Input password when the interface appears.
Step 4: If device says ‘Thank you”, the verification is completed.

Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
- 9 -
When the screen displayed "password error" and "Input password again"
as shown below:

F18 User Manual V1.0
- 10 -
Please return Step 3 input password again for the second operation.
Ranges of the input password time is 0~9. Employee can set default
time what you want. For details please refer to 4.4 Display Setting.
Card Matching ★
The card area is round the keyboard.
Step 1: Wave the card near the induction area on initial interface, after
the induction equipment finding the card, please remove the card.
Step 2: When the equipment gives the tip "Thank you", the certification completed.

Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
- 11 -
Step 3: If the card has not registered yet, prompt that card is not registered.
1.4 Connection with PC
The device only records attendance time. The statement can be disposed
by software on PC. Therefore, it is necessary for device to connect PC to
download attendance record to attendance software.
The following is some connection methods:
Ethernet:
（1) Through hub: Use parallel net cable (to connect network card and
hub) to connect device into the network.
（2) Direct connection: use cross net cable（connect two Ethernet
terminals directly) to connect device and PC.
Set device: Enter Menu－Communication option－Network to set the
following items:
IP address: Default IP as 192.168.1.201.You can modify it if it is
necessary.

F18 User Manual V1.0
- 12 -
Subnet mask: Default subnet mask as 255.255.255.0. You can modify it
if it is necessary.
Gateway address: Default gateway address0.0.0.0. You can modify it if
it is necessary.
Network speed: There are three options:ATUO, 10M, and 100M.
Connection password: Set it in “Menu－Communication option－
Security”. It can be set or not. If it is set, input corresponding numerical
value on connection interface of PC software.
RS232: Use RS232 serial port wire for connection.
Set device: Enter Menu－Communication option to set the following
options:
Baud rate: Set it in “RS232/485”. Communication speed rate (with
computer),if the communication speed is high, RS232 （115200, 57600)
is recommended.
RS232: Set it in “RS232/485”.Select “Yes” for RS232.
Communication password: Set it in “Security”. It can be set or not set. If
it is set, input corresponding numerical value on connection interface of
PC software.
RS485
set device: Enter Menu－Communication option to set the following
options:
Device ID: Set it in “Security”. It can be set from 1－254.
Baud rate: Set it in “RS232/485”.Communication speed rate (with
computer),if the communication speed is low and stable, RS 485
（9600, , 38400) is recommended.
RS485: Set it in “RS232/485”.Select “Yes” for RS485
Communication password: Set it in “Security”. It can be set or not. If it