ZKTeco SpeedFace-V3L User manual

Product Name and Model Number User
Manual
Page | 1 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Thank you for choosing our product. Please read the instructions
carefully before operation. Follow these instructions to ensure that the
product is functioning properly. The images shown in this manual are for
illustrative purposes only.
For further details, please visit our Company’s website
www.zkteco.com.
User Manual
SpeedFace-V3L
Date: June 2022
Doc Version: 1.0
English

SpeedFace-V3L User Manual
Page | 1Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Copyright © 2022 ZKTECO CO., LTD. All rights reserved.
Without the prior written consent of ZKTeco, no portion of this manual can be
copied or forwarded in any way or form. All parts of this manual belong to ZKTeco
and its subsidiaries (hereinafter the "Company" or "ZKTeco").
Trademark
is a registered trademark of ZKTeco. Other trademarks involved in this
manual are owned by their respective owners.
Disclaimer
This manual contains information on the operation and maintenance of the ZKTeco
equipment. The copyright in all the documents, drawings, etc. in relation to the
ZKTeco supplied equipment vests in and is the property of ZKTeco. The contents
hereof should not be used or shared by the receiver with any third party without
express written permission of ZKTeco.
The contents of this manual must be read before starting the operation and
maintenance of the supplied equipment. If any of the content(s) of the manual
seems unclear or incomplete, please contact ZKTeco before starting the operation
and any information contained in this manual or any of the amendments made
thereto. ZKTeco does not extend the warranty of any kind, including, without
limitation, any warranty of design, merchantability, or fitness for a particular
purpose. ZKTeco does not assume responsibility for any errors or omissions in the
information or documents which are referenced by or linked to this manual. The
entire risk as to the results and performance obtained from using the information is
assumed by the user.
ZKTeco in no event shall be liable to the user or any third party for any incidental,
consequential, indirect, special, or exemplary damages, including, without
limitation, loss of business, loss of profits, business interruption, loss of business
information or any pecuniary loss, arising out of, in connection with, or relating to
the use of the information contained in or referenced by this manual, even if
ZKTeco has been advised of the possibility of such damages.

SpeedFace-V3L User Manual
Page | 2Copyright©2022 ZKTECO CO., LTD. All rights reserved.
This manual and the information contained therein may include technical, other
inaccuracies or typographical errors. ZKTeco periodically changes the information
herein which will be incorporated into new additions/amendments to the manual.
ZKTeco reserves the right to add, delete, amend, or modify the information
contained in the manual from time to time in the form of circulars, letters, notes,
etc. for better operation and safety of the machine/unit/equipment. The said
additions or amendments are meant for improvement /better operations of the
machine/unit/equipment and such amendments shall not give any right to claim
any compensation or damages under any circumstances.
ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment
malfunctions due to any non-compliance of the instructions contained in this
manual (ii) in case of operation of the machine/unit/equipment beyond the rate
limits (iii) in case of operation of the machine and equipment in conditions
different from the prescribed conditions of the manual.
The product will be updated from time to time without prior notice. The latest
operation procedures and relevant documents are available on
http://www.zkteco.com
If there is any issue related to the product, please contact us.
ZKTeco Headquarters
Address ZKTeco Industrial Park, No. 32, Industrial Road,
Tangxia Town, Dongguan, China.
Phone +86 769 - 82109991
Fax +86 755 - 89602394
For business-related queries, please write to us at [e-mail].
To know more about our global branches, visit www.zkteco.com.

SpeedFace-V3L User Manual
Page | 3Copyright©2022 ZKTECO CO., LTD. All rights reserved.
About the Company
ZKTeco is one of the world’s largest manufacturer of RFID and Biometric
(Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control
readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor
access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and
Consumer products including battery-operated fingerprint and face-reader Door
Locks. Our security solutions are multi-lingual and localized in over 18 different
languages. At the ZKTeco state-of-the-art 700,000 square foot ISO9001-certified
manufacturing facility, we control manufacturing, product design, component
assembly, and logistics/shipping, all under one roof.
The founders of ZKTeco have been determined for independent research and
development of biometric verification procedures and the productization of
biometric verification SDK, which was initially widely applied in PC security and
identity authentication fields. With the continuous enhancement of the
development and plenty of market applications, the team has gradually
constructed an identity authentication ecosystem and smart security ecosystem,
which are based on biometric verification techniques. With years of experience in
the industrialization of biometric verifications, ZKTeco was officially established in
2007 and now has been one of the globally leading enterprises in the biometric
verification industry owning various patents and being selected as the National
High-tech Enterprise for 6 consecutive years. Its products are protected by
intellectual property rights.
About the Manual
This manual introduces the operations of SpeedFace-V3L.
All figures displayed are for illustration purposes only. Figures in this manual may
not be exactly consistent with the actual products.
Features and parameters with ★are not available in all devices.

SpeedFace-V3L User Manual
Page | 4Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Document Conventions
Conventions used in this manual are listed below:
GUI Conventions
For Software
Convention Description
Bold font Used to identify software interface names e.g., OK, Confirm,
Cancel.
> Multi-
level menus are separated by these brackets. For
example, File > Create > Folder.
For Device
Convention Description
< > Button or key names for devices. For example, press <OK>.
[ ]
Window names, menu items, data table, and field names are
inside square brackets. For example, pop up the [New User]
window.
/ Multi-
level menus are separated by forwarding slashes. For
example, [File/Create/Folder].
Symbols
Convention Description
This represents a note that needs to pay more attention to.
The general information which helps in performing the
operations faster.
The information which is significant.
Care taken to avoid danger or mistakes.
The statement or event that warns of something or that serves
as a cautionary example.

SpeedFace-V3L User Manual
Page | 5Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Table of Contents
1 SAFETY MEASURES ............................................................................................9
2 ELECTRICAL SAFETY ........................................................................................10
3 OPERATION SAFETY.........................................................................................11
4 INSTRUCTION FOR USE....................................................................................13
FINGER POSITIONING............................................................................................... 134.1
STANDING POSITION,FACIAL EXPRESSION AND STANDING POSTURE ........................... 144.2
FACE REGISTRATION ................................................................................................ 154.3
STANDBY INTERFACE................................................................................................ 164.4
VIRTUAL KEYBOARD ................................................................................................ 194.5
VERIFICATION MODE ............................................................................................... 204.6
4.6.1 FINGERPRINT VERIFICATION............................................................................................. 20
4.6.2 FACIAL VERIFICATION ...................................................................................................... 23
4.6.3 CARD VERIFICATION........................................................................................................ 25
4.6.4 PASSWORD VERIFICATION ............................................................................................... 28
4.6.5 COMBINED VERIFICATION................................................................................................ 30
5 MAIN MENU......................................................................................................32
6 USER MANAGEMENT........................................................................................34
USER REGISTRATION................................................................................................ 346.1
6.1.1 REGISTER A USER ID AND NAME..................................................................................... 34
6.1.2 USER ROLE...................................................................................................................... 35
6.1.3 REGISTER FINGERPRINT ................................................................................................... 36
6.1.4 FACE ............................................................................................................................... 36
6.1.5 CARD .............................................................................................................................. 37

SpeedFace-V3L User Manual
Page | 6Copyright©2022 ZKTECO CO., LTD. All rights reserved.
6.1.6 PASSWORD...................................................................................................................... 38
6.1.7 ACCESS CONTROL ROLE ................................................................................................. 39
SEARCH USER ......................................................................................................... 406.2
EDIT USER .............................................................................................................. 416.3
DELETE USER.......................................................................................................... 426.4
DISPLAY STYLE ....................................................................................................... 436.5
7 USER ROLE........................................................................................................45
8 COMMUNICATION SETTINGS...........................................................................48
NETWORK SETTINGS ............................................................................................... 488.1
SERIAL COMM......................................................................................................... 508.2
PC CONNECTION .................................................................................................... 518.3
WI-FI SETTINGS ...................................................................................................... 528.4
CLOUD SERVER SETTING .......................................................................................... 568.5
WIEGAND SETUP..................................................................................................... 578.6
8.6.1 WIEGAND INPUT ............................................................................................................. 57
8.6.2 WIEGAND OUTPUT ......................................................................................................... 61
NETWORK DIAGNOSIS ............................................................................................. 628.7
9 SYSTEM SETTINGS ...........................................................................................63
DATE AND TIME ...................................................................................................... 639.1
ACCESS LOGS SETTING ............................................................................................ 659.2
FACE PARAMETERS .................................................................................................. 679.3
FINGERPRINT .......................................................................................................... 729.4
FACTORY RESET ...................................................................................................... 749.5
SECURITY SETTINGS ............................................................................................... 749.6
10 PERSONALIZE SETTINGS................................................................................77
INTERFACE SETTINGS ............................................................................................. 7710.1

SpeedFace-V3L User Manual
Page | 7Copyright©2022 ZKTECO CO., LTD. All rights reserved.
VOICE SETTINGS ................................................................................................... 7910.2
BELL SCHEDULES .................................................................................................. 8010.3
PUNCH STATES OPTIONS ....................................................................................... 8210.4
SHORTCUT KEY MAPPINGS .................................................................................... 8410.5
11 DATA MANAGEMENT .....................................................................................88
DELETE DATA ....................................................................................................... 8811.1
12 ACCESS CONTROL ..........................................................................................90
ACCESS CONTROL OPTIONS ................................................................................... 9112.1
TIME SCHEDULE.................................................................................................... 9412.2
HOLIDAYS ............................................................................................................ 9612.3
COMBINED VERIFICATION ...................................................................................... 9712.4
ANTI-PASSBACK SETUP.......................................................................................... 9912.5
DURESS OPTIONS SETTINGS ................................................................................10112.6
13 ATTENDANCE SEARCH ................................................................................ 103
14 AUTOTEST ................................................................................................... 105
15 SYSTEM INFORMATION............................................................................... 107
16 CONNECT TO ZKBIOACCESS SOFTWARE .................................................... 108
SET THE COMMUNICATION ADDRESS ....................................................................10816.1
ADD DEVICE ON THE SOFT WARE...........................................................................10916.2
ADD PERSONNEL ON THE SOFTWARE ....................................................................11016.3
APPENDIX 1...................................................................................................... 111
REQUIREMENTS OF LIVE COLLECTION AND REGISTRATION OF VISIBLE LIGHT FACE IMAGES .111
REQUIREMENTS FOR VISIBLE LIGHT DIGITAL FACE IMAGE DATA ........................................112

SpeedFace-V3L User Manual
Page | 8Copyright©2022 ZKTECO CO., LTD. All rights reserved.
APPENDIX 2...................................................................................................... 114
PRIVACY POLICY..........................................................................................................114
ECO-FRIENDLY OPERATION ............................................................................. 118

SpeedFace-V3L User Manual
Page | 9Copyright©2022 ZKTECO CO., LTD. All rights reserved.
1Safety Measures
The below instructions intend to ensure that the user can use the product
correctly to avoid danger or property loss. The following precautions are to
keep users safe and prevent any damage. Please read carefully before
installation.
Noncompliance with instructions could lead to product damage or
physical injury (may even cause death).
1. Read, follow, and retain instructions - All safety and operational
instructions must be properly read and followed before bringing the
device into service.
2. Do not ignore warnings - Adhere to all warnings on the unit and in the
operating instructions.
3. Accessories - Use only manufacturer-recommended or product-sold
accessories. Please do not use any other components other than
manufacturer suggested materials.
4. Precautions for the installation – Do not place this device on an
unstable stand or frame. It may fall and cause serious injury to persons
and damage to the device.
5. Service - Do not try to service this unit yourself. Opening or removing
covers may expose you to hazardous voltages or other hazards.
6. Damage requiring service - Disconnect the system from the Mains AC or
DC power source and refer service personnel under the following
conditions:
When cord or connection control is affected.
When the liquid spilled, or an item dropped into the system.
If exposed to water or due to inclement weather (rain, snow, and

SpeedFace-V3L User Manual
Page | 10 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
more).
If the system is not operating normally, under operating
instructions.
Just change controls defined in operating instructions. Improper
adjustment of the controls may result in damage and involve a qualified
technician to return the device to normal operation.
And do not connect multiple devices to one power adapter as adapter
overload can cause over-heat or fire hazard.
7. Replacement parts - When replacement parts are needed, service
technicians must only use replacement parts provided by the supplier.
Unauthorized substitutes can result in a burn, shock, or other hazards.
8. Safety check - On completion of service or repair work on the unit, ask
the service technician to perform safety checks to ensure proper
operation of the device.
9. Power sources - Operate the system only from the label's power source
form. If the sort of power supply to use is unclear, call your dealer.
10. Lightning - Can install external lightning conductors to protect against
electrical storms. It stops power-ups from destroying the system.
Recommended installing the devices in areas with limited access.
2Electrical Safety
Before connecting an external cable to the device, complete grounding
properly, and set up surge protection; otherwise, static electricity will
damage the mainboard.
Make sure that the power has been disconnected before you wire, install,
or dismantle the device.
Ensure that the signal connected to the device is a weak-current (switch)

SpeedFace-V3L User Manual
Page | 11 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
signal; otherwise, components of the device will get damaged.
Ensure that the standard voltage applicable in your country or region is
applied. If you are not sure about the endorsed standard voltage, please
consult your local electric power company. Power mismatch may cause a
short circuit or device damage.
In the case of power supply damage, return the device to the professional
technical personnel or your dealer for handling.
To avoid interference, keep the device far from high electromagnetic
radiation devices, such as generators (including electric generators),
radios, televisions, (especially CRT) monitors, or speakers.
3Operation Safety
If smoke, odour, or noise rise from the device, turn off the power at once
and unplug the power cable, and then please contact the service centre.
Transportation and other unpredictable causes may damage the device
hardware. Check whether the device has any intense damage before
installation.
If the device has major defects that you cannot solve, contact your dealer
as soon as possible.
Dust, moisture, and abrupt temperature changes can affect the device's
service life. You are advised not to keep the device under such conditions.
Do not keep the device in a place that vibrates. Handle the device with
care. Do not place heavy objects on top of the device.
Do not apply rosin, alcohol, benzene, pesticides, and other volatile
substances that may damage the device enclosure. Clean the device
accessories with a piece of soft cloth or a small amount of cleaning agent.
If you have any technical questions regarding usage, contact certified or

SpeedFace-V3L User Manual
Page | 12 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
experienced technical personnel.
Note:
Make sure whether the positive polarity and negative polarity of the DC
12V power supply is connected correctly. A reverse connection may
damage the device. It is not advisable to connect the AC 24V power
supply to the DC 12V input port.
Make sure to connect the wires following the positive polarity and
negative polarity shown on the device's nameplate.
The warranty service does not cover accidental damage, damage caused
by mis-operation, and damage due to independent installation or repair
of the product by the user.

SpeedFace-V3L User Manual
Page | 13 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
4Instruction for Use
Before getting into the device features and functions, it is recommended to be
familiar with the below fundamentals.
Finger Positioning4.1
Recommended fingers: Index, middle, or ring fingers; avoid using the thumb
or pinky, as they are difficult to accurately press onto the fingerprint reader.
Note: Please use the correct method when pressing your fingers onto the
fingerprint reader for registration and identification. Our company will assume
no liability for recognition issues that may result from incorrect usage of the
product. We reserve the right of final interpretation and modification
concerning this point.
Too low Too close to the edge
Vertical

SpeedFace-V3L User Manual
Page | 14 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Standing Position, Facial Expression and4.2
Standing Posture
The recommended distance
Recommended standing posture and facial expression
Note: Please keep your facial expression and standing posture natural while
enrolment or verification.
The distance between the device and a user
whose height is in a range of 1.55m to 1.85m is
recommended to be 0.3 to 2.5m. Users may
slightly move forward or backward to improve
the character of facial images captured.
Facial Expression Standing Posture

SpeedFace-V3L User Manual
Page | 15 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Face Registration4.3
Try to keep the face in the centre of the screen during registration. Please face
the camera and stay still during face registration. The screen looks like this:
Correct face registration and authentication method
Recommendation for registering a face
When registering a face, maintain a distance of 40cm to 80cm
between the device and the face.
Be careful to keep your facial expression natural and not to change.
(smiling face, drawn face, wink, etc.)
If you do not follow the instructions on the screen, the face
registration may take longer or may fail.
Be careful not to cover the eyes or eyebrows.

SpeedFace-V3L User Manual
Page | 16 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Do not wear hats, masks, sunglasses or eyeglasses.
Be careful not to display two faces on the screen. Register one person
at a time.
It is recommended for a user wearing glasses to register both faces
with and without glasses.
Recommendation for authenticating a face
Ensure that the face appears inside the guideline displayed on the
screen of the device.
Sometimes, authentication may fail due to the change in the wearing
glasses then the one used while registration. In such a case, you may
require authenticating your face with the previously worn glasses. If
your face was registered without glasses, you should authenticate
your face without glasses further.
If a part of the face is covered with a hat, a mask, an eye patch, or
sunglasses, authentication may fail. Do not cover the face, allow the
device to recognize both the eyebrows and the face.
Standby Interface4.4
After connecting the power supply, the following standby interface is
displayed:

SpeedFace-V3L User Manual
Page | 17 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Tap to enter the User ID input interface.
When there is no Super Administrator set in the device, tap to go to
the menu.
After adding a Super Administrator on the device, it requires the Super
Administrator’s verification before opening the menu functions.

SpeedFace-V3L User Manual
Page | 18 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Note: For the security of the device, it is recommended to register a super
administrator the first time you use the device.
The punch state options can also be displayed and used directly on the
standby interface. Tap anywhere on the screen apart from the icons, and
six shortcut keys appears on the screen, as shown in the figure below:
Press the corresponding punch state key to select your current punch
state, which is displayed in green. Please refer to "Shortcut Key Mappings"
for the specific operation method.
Note: The punch state options are off by default and need to select other mode
options in the "Punch State Option" to get the punch state options on the
standby screen.

SpeedFace-V3L User Manual
Page | 19 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Virtual Keyboard4.5
Note: The device supports the input in English language, numbers, and
symbols.
Tap [EN] to switch to the numeric keyboard.
Press [123] to switch to the symbolic keyboard.
Tap [@#&] to return to the English keyboard.
Tap [ ] to exit the virtual keyboard.