
Setting Up Your Phone for the First Time
When you first power on your phone after you purchase it or
reset it to factory settings (see chapter Sorting out Your Phone Settings
–Restore the factory Settings: Reset to Factory
Settings), you
need to do some settings before using it.
Tap Menu Key in the standby mode, then select
SETTINGS > Language & input > Language to change
the language you want to use, if needed.
To save battery power, Sleep Mode suspends your device to
a low-power-consumption state while the display is off. Your
device also goes into Sleep Mode by itself when the display
is automatically turned off after a certain period of time.
You can start sleep mode by the following method.
Press Power Key to switch to Sleep Mode.
1. Press Power Key to activate your screen display.
NOTE: If you have set an unlock pattern, PIN or password
for your phone (see chapter Sorting out Your Phone
Settings –Security Settings) you’ll need to draw the pattern
or enter the PIN/password to unlock your screen.