ZURN AQUASPEC Z84300-XL SERIES Manual

®
PAGE1 OF2
AQUASPEC FAUCETS
MODEL - Z84300-XL SERIES
SINK FAUCET
TECHNICALINFORMATION
MAXIMUM PRESSURE: 125 PSI
MAXIMUM TEMPERATURE: 160O FF
HANDLE NUT TORQUE: 15-20 FT - LBS.
CARTRIDGE STYLE: QUARTER TURN CERAMIC DISK
INSTALLATIONINSTRUCTIONS
1. 1/2” IP NIPPLE SHOULD PROTRUDE 3/8” FROM THE FINISHED WALL ON 8” CENTERS. SUPPLY PIPES SHOULD BE
SECURED TO SUPPORT THE FAUCET.
2. APPLYPIPESEALANTTO1/2” THREADSOF SUPPLYPIPEAND SCREWSUPPLYARMASSEMBLY(ITEM #2)ONTOPIPE.
POSITION SUPPLIES SO THAT THE BODYCONNECTIONS END UPAT 8” CENTERS ONAHORIZONTALPLANE.
3. INSERTSINKFAUCETBODY(ITEM#1D)TOSUPPLYARMS PLACINGGASKET(ITEM#2A)BETWEENBODYANDSUPPLY
ARM.
4. ASSEMBLESPOUT TOBODY USINGHARDWARE.
5. INSTALLWALL BRACE BYSCREWING THE SUPPORT ROD INTO THE THREADED SPOUTCONNECTION. ADJUST THE
SUPPORT ROD TO DESIRED LENGTHAND SECURE TO FINISHED WALLUSING THE TWO WOOD SCREWS PROVIDED.
NOTE: SUPPORTFOR FINISHEDWALLISRECOMMENDED WHEREWALLBRACEMOUNTS FORMAXIMUM SUPPORT.
6. TURNWATER SUPPLYONAND OPERATEFAUCETCHECKING FORLEAKS.
7. ITMAYBENECESSARYTOSHUT WATER OFFANDREMOVE CARTRIDGES TOCLEAN SUPPLYLINES. CARTRIDGES
CANBE REMOVEDBYFIRSTREMOVINGTHE HANDLES. COLORINDEXES CANBE REMOVEDBY INSERTINGAPIN
INTO THE HOLE ON THE UNDERSIDE OF THE HANDLE. AFTER THE HANDLES HAVE BEEN REMOVED UNSCREW THE
HANDLE NUTS AND PULL OUT ON THE CARTRIDGE. ZURN WILLSUPPLY HANDLE PORT PLUGS (ZURN PART
#61094001) AT YOUR REQUEST.
8. REPLACE CARTRIDGES IN BODYAND HAND TIGHTEN HANDLE NUTS. PLACE HANDLES ON THE CARTRIDGE STEM
AND LOCATE THEMAS DESIRED. TIGHTEN HANDLE NUTS.
9. REPLACE HANDLE SCREWSAND COLOR INDEX BUTTON.
10.IFNECESSARY, INSTALL AERATORONTOSPOUTANDHAND TIGHTEN. ITMAYBENECESSARYTOUNSCREW AND
CLEANAERATORATSTART-UP.
SERVICEINSTRUCTIONS
1. YOURZURNAQUASPECFAUCET ISFURNISHED WITHINTEGRALSUPPLYSTOPS(ITEM #4B)TOPROVIDEACOMPLETE
SHUT OFF OFTHE WATER SUPPLY. TURN SCREW STOPS INTO BODYUSING 5/16” HEX KEY WRENCH UNTILWATER
SHUTSOFF COMPLETELY. TURNSTOPNO MORETHANTHREE (3)COMPLETETURNSTOACTIVATE WATER FLOW.
CAUTION-FOR INSTALLATION WITHATMOSPHERIC VACUUM BREAKERS (AVB’S).THIS DEVICESHOULDNEVER
BE USED IN INSTALLATIONS THATARE UNDER CONTINUOUS PRESSURE WHEN INSTALLED WITH SPOUTS HAVING
ATMOSPHERICVACUUMBREAKERS (AVB’S).THEREFORE, NEVERPLACEASELF-CLOSING,SHUT-OFF VALVEDOWN-
STREAMOFANAVB.
Form # CF1576 Date: 1/14/11
C.N. No. 127294 Rev.
ZURN INDUSTRIES, LLC ♦♦
♦♦
♦COMMERCIAL BRASS OPERATION ♦♦
♦♦
♦2640 SOUTH WORK STREET ♦♦
♦♦
♦FALCONER NY 14733
Phone: [phone] ♦♦
♦♦
♦Fax: [phone] ♦♦
♦♦
♦www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦♦
♦♦
♦3544 Nashua Drive ♦♦
♦♦
♦Mississauga, Ontario L4V1L2 ♦♦
♦♦
♦Phone: [phone] Fax: [phone]

PAGE 2 OF 2
Z843M1-XLPICTURED
MAINTENANCE
1. YOURZURNAQUASPECFAUCETHASAHIGHLYPOLISHED NICKELCHROMEPLATED FINISH. CLEANWITHSOAP
AND WATER ORAMILD CLEANER WHICH IS SAFE FOR CHROME PLATING. DO NOT USEACIDS OR TOILETBOWL
CLEANERAS THEYWILLDAMAGETHEFINISH.
2. AQUASPEC FAUCETS CONTAINCERAMIC DISKCARTRIDGESWHICH REQUIRENO MAINTENANCE. TOREMOVE THE
CARTRIDGE, SHUTTHE WATER OFF, LOOSEN THE HANDLE NUTSAND PULLUP ON THE CARTRIDGE.
REPLACEMENTPARTS
COLD WATER CARTRIDGE 59517005
HOTWATER CARTRIDGE 59517006
INDEXBUTTONS G60500
STOPPLUGASSEMBLY G67968
ITEM QTY
1 G67998 SINKBODYASSEMBLY XL 1
1A 59440001 HANDLENUT 2
1B 59517005 SHORTCOLDCARTRIDGEXL 1
1C 59517006 SHORTHOTCARTRIDGEXL 1
1D N/A SINKBODYXL 1
ITEM QTY
1E G67968 STOPPLUGASSEMBLYXL 2
N/A STOPPLUGXL 1
N/A O-RING 1
2 G67882 SHORTSUPPLYARM ASS’Y. 2
2A 59748001 GASKET 2
Z84300-XLPARTS LIST
Form # CF1576 Date: 1/14/11
C.N. No. 127294 Rev.