2N BRI Lite User manual

www.2n.cz
2N BRI Lite/Enterprise
®
User Manual
Version: 1.16

The 2N TELEKOMUNIKACE a.s. is a Czech manufacturer and supplier of
telecommunications equipment.
The product family developed by 2N TELEKOMUNIKACE a.s. includes GSM gateways,
private branch exchanges (PBX), and door and lift communicators. 2N
TELEKOMUNIKACE a.s. has been ranked among the Czech top companies for years
and represented a symbol of stability and prosperity on the telecommunications
market for almost two decades. At present, we export our products into over 120
countries worldwide and have exclusive distributors on all continents.
2N is a registered trademark of 2N TELEKOMUNIKACE a.s. Any product and/or other
®
names mentioned herein are registered trademarks and/or trademarks or brands
protected by law.
2N TELEKOMUNIKACE a.s. administers the FAQ database to help you quickly find
information and to answer your questions about 2N products and services. On www.
faq.2n.cz you can find information regarding products adjustment and instructions for
optimum use and procedures „What to do if...".
2N TELEKOMUNIKACE a.s. hereby declares that the 2N product complies with all
®
basic requirements and other relevant provisions of the 1999/5/EC directive. For the
full wording of the Declaration of Conformity see the CD-ROM (if enclosed) or our
website at www.2n.cz.
The 2N TELEKOMUNIKACE a.s. is the holder of the ISO 9001:2009 certificate. All
development, production and distribution processes of the company are managed by
this standard and guarantee a high quality, technical level and professional aspect of
all our products.

2N TELEKOMUNIKACE a.s., www.2n.cz 3/152
Content:
1. Product Overview
1.1 Product Description
1.2 Safety Precautions
1.3 Changes
1.4 Terms and Symbols Used
2. Description and Installation
2.1 Before You Start
2.2 Brief Installation Guide
2.3 Available ISDN BRI Extension Configurations
2.4 IP Voice Transmission
2.5 Types of 2N® BRI Enterprise Connection
3. Making Calls via BRI Gateway
3.1 Supported 2N BRI Gateway Functions
3.2 Call Routing Principles
4. First Launch
4.1 Ethernet Interface
4.2 Licence
4.3 Firmware Version
4.4 Factory Reset
4.5 Basic Configuration - Step by Step

2N TELEKOMUNIKACE a.s., www.2n.cz 4/152
5. Představení konfiguračního rozhraní
5.1 Configuration Web Interface
5.1.1 Gateway Control
5.1.2 Gateway Configuration
5.1.3 Messaging
5.1.3.1 SMPP Basic Configuration - Step by Step
5.1.3.2 SMTP/POP3 Basic Configuration - Step by Step
5.1.4 Monitoring
5.1.4.1 List of SNMP traps
5.1.5 Utils
5.1.6 Management
5.1.7 Others
6. Advanced Configuration
6.1 LAN Communication Setting
6.2 GSM Gateway Behaviour
6.3 List of Terminal AT Commands
6.4 Status Messages
6.5 LOG Files
6.6 Call Data Records (CDR)
6.7 SMS Data Records (SDR)
6.8 Statistics - Description
7. Technical Parameters
8. Supplementary Information
8.1 Troubleshooting
8.2 List of Abbreviations
8.3 Directives, Laws and Regulations
8.4 General Instructions and Cautions

2N TELEKOMUNIKACE a.s., www.2n.cz 5/152
1. Product Overview
In this section, we introduce the product, outline its 2N BRI Lite / Enterprise
®
application options and highlight the advantages following from its use.
Here is what you can find in this section:
1.1 Product Description
1.2 Safety Precautions
1.3 Changes
1.4 Terms and Symbols Used

2N TELEKOMUNIKACE a.s., www.2n.cz 6/152
1.1 Product Description
The GSM gateway provides direct interconnection of the 2N Enterprise / BRI Lite
®
ISDN with GSM networks. It can also be used for direct interconnection of an ISDN
PBX with a GSM network, ISDN telephone set and, via a terminal adapter, with an
analogue apparatus or coin machine. The voice mode, i.e. outgoing and incoming calls,
is the basic function of the gateway. Moreover, the BRI gateway provides connection
to the VoIP-SIP networks. The gateway is equipped with all functions necessary for
this mode and is very user-friendly. In addition, allows 2N BRI Enterprise / BRI Lite
®
you to send and receive SMS messages. No additional devices (an external telephone,
e.g.) are required for normal operation. All gateway parameters can be set using a
configuration program (on an enclosed CD), or using the AT commands.
Programmable parameters are pre-set to make it possible to make calls as soon as the
supply cable, antenna a SIM cards are connected.
2N ® BRI Enterprise / 2N ® BRI Lite Differences
The and gateways are based on one and the same 2N BRI Enterprise
®2N BRI Lite
®
type of hardware and apply identical firmware and control (configuration) software.
The only difference lies in the count of BRI ISDN interfaces:
Interface
2N
®
BRI Lite
2N
®
BRI Enterprise
BRI ISDN 1 (NT/TE) 2 (1 TE ; 1 NT)
Ethernet YES* YES*
*The VoIP-SIP support depends on Part No. (subject to licence).
Telephone Cost Cuts
Having connected to your ISDN PBX, you can 2N BRI Enterprise / BRI Lite
®
make calls to the mobile network directly. This saves your PSTN – GSM
.connection costs
You do not pay for barred calls. You can set groups of barred numbers in the
gateway.
A flexible setting of the Least Cost Router helps you call GSM numbers at
.minimum operational costs

2N TELEKOMUNIKACE a.s., www.2n.cz 7/152
You can route calls to alternative providers' networks via the VoIP/SIP interface.
As all gateway user calls are added up for billing purposes, you are advised to
use the most advantageous tariff offered by your provider.
2N ® BRI Enterprise / 2N ® BRI Lite Basic Features
Integration of the best features of two communication technologies: ISDN and
GSM
VoIP–SIP telephony support with G.711a/u and G.729ab codecs [1]
Intelligent routing of incoming and outgoing calls
Web interface for gateway configuration and SMS sending/receiving
Automatic no answer SMS sending for GSM networks
Automatic missed call SMS in the GSM network
Simple recording of a welcome note, DISA voice message
Automatic recording of call data and detailed statistics (CDR)
ENBLOCK/OVERLAP ISDN dialling switch option
Monitoring of ISDN BRI line statuses and alarm SMS sending option
Automatic sending of Alive SMS in user-defined intervals
Easy firmware upgrade via a configuration program
External synchronising source connection option (BRI Enterprise)
Mobility Extension support [2].
SNMP error traps [1]
Sending/receiving SMS via SMTP/POP3 [1]
Sending/receiving SMS via SMPP [1]
[1] Depending on the licence
[2] Will be available in early 2013
DialThru (2N ® BRI Enterprise)
The difference between and lies in the DialThru 2N BRI Enterprise
®2N BRI Lite
®
functionality. DialThru enables the gateway to be connected between the PBX and the
voice service provider line, i.e. PSTN. The GSM gateway in the DialThru mode routes,
based on the LCR, calls into the PSTN or GSM/UMTS networks.
Refer to the figure below for a schematic diagram of the 2N BRI Enterprise
®
connection.

2N TELEKOMUNIKACE a.s., www.2n.cz 8/152
The gateway works as a dial-through router (using both the TE and NT ports in the
DialThru mode) for calls to a mobile network, and a monitoring system, which, with
the appropriate licence, sends SMS to the provider (in the case of line unavailability, e.
g.).
The GSM gateway contains just one ISDN BRI port and thus cannot work 2N BRI Lite
®
in the DialThru mode. It can be connected to a PBX on a trunk line or extension and
route calls to the GSM/UMTS networks only – see the figure below.

2N TELEKOMUNIKACE a.s., www.2n.cz 9/152
1.2 Safety Precautions
It is prohibited to use any transmitters, including the GSM/UMTS gateways, in areas
where explosives are used, such as quarries.
It is prohibited to use the GSM gateways at petrol 2N BRI Enterprise / BRI Lite
®
stations where mobile telephones are also prohibited.
GSM phones may affect sensitive life-saving devices in medical centres. Therefore, it is
forbidden to use GSM/UMTS devices, including the GSM gateways, in such facilities.
In general, any prohibition regarding mobile phones based on RF energy radiation
applies to GSM/UMTS devices too.
If necessary, the GSM gateways may be installed at a safe distance from the
prohibited area and connected with the original place through an Ethernet cable.
Although GSM gateways are not intended for cars or aeroplanes, all relevant
prohibitions and regulations regarding mobile phones apply to them too.

2N TELEKOMUNIKACE a.s., www.2n.cz 10/152
1.3 Changes
The manufacturer reserves the right to modify the product in order to improve its
qualities.
In response to the customers' requirements, the manufacturer constantly improves the
software contained in the product (firmware). For the latest
firmware version and the User Manual refer to the 2N BRI Enterprise / BRI Lite
®2N®
2N .web sites
Refer to the , , for a detailed description of the S. 2 Description and Installation 2N® BRI
firmware upgrade.Enterprise / BRI Lite2N®
Manual
Version
Changes
1.0
The User Manual relates to the firmware version .2N BRI Enterprise / BRI Lite
®1.5.0
1.3
The User Manual relates to the firmware version . 2N
®BRI Enterprise / BRI Lite 1.5.0
Text correction.
1.4
The User Manual relates to the firmware version 2N BRI Enterprise / BRI Lite
®1.14.0
.
1.5
The User Manual relates to the firmware version 2N BRI Enterprise / BRI Lite
®1.16.5
.
1.6
The User Manual relates to the firmware version 2N Enterprise / BRI Lite
®BRI 1.17.0
.
1.7
The User Manual relates to the firmware version .2N Enterprise / BRI Lite
®BRI 1.18.1
1.8
The User Manual relates to the firmware version 2N Enterprise / BRI Lite
®BRI 1.19.1
.

2N TELEKOMUNIKACE a.s., www.2n.cz 11/152
1.9
The User Manual relates to the firmware version 2N Enterprise / BRI Lite
®BRI
.1.22.0
1.10
The User Manual relates to the firmware version 2N Enterprise / BRI Lite
®BRI
. Text correction.1.22.0
1.11
The User Manual relates to the firmware version 2N Enterprise / BRI Lite
®BRI
.1.23.0
1.12
The User Manual relates to the firmware version 2N Enterprise / BRI Lite
®BRI
.1.24.0
1.13
The User Manual relates to the firmware version 2N Enterprise / BRI Lite
®BRI
.1.25.0
1.14
The User Manual relates to the firmware version 2N Enterprise / BRI Lite
®BRI 1.26.1
.
1.15
The User Manual relates to the firmware version 2N Enterprise / BRI Lite
®BRI
.1.28.0
1.16
The User Manual relates to the firmware version 2N Enterprise / BRI Lite
®BRI 1.29.1
.

2N TELEKOMUNIKACE a.s., www.2n.cz 12/152
1.4 Terms and Symbols Used
Manual Symbols
The following symbols and pictograms are used in the manual:
Safety
Always abide by this information to prevent persons from injury.
Warning
Always abide by this information to prevent damage to the device.
Caution
Important information for system functionality.
Tip
Useful information for quick and efficient functionality.
Note
Routines or advice for efficient use of the device.
Future Functions, Innovations
The in this document designates the functions that are under grey-marked text
preparation or development at present.

2N TELEKOMUNIKACE a.s., www.2n.cz 13/152
2. Description and Installation
This section describes the product and its 2N BRI Enterprise /
®2N BRI Lite
®
installation.
Here is what you can find in this section:
2.1 Before You Start
2.2 Brief Installation Guide
2.3 Available ISDN BRI Extension Configurations
2.4 IP Voice Transmission
2.5 Types of 2N® BRI Enterprise Connection

2N TELEKOMUNIKACE a.s., www.2n.cz 14/152
2.1 Before You Start
Caution
Make sure that you are equipped with all system components necessary
for putting in operation (SIM card, ISDN phone 2N BRI Enterprise / Lite
®
and/or duly configured ISDN BRI line of your PBX or PSTN, an available
Ethernet/USB socket and a PC for initial gateway configuration).
Product Completeness Check
Before installing this product, check whether the gateway delivery complies 2N BRI
®
with the following packing list:
Package BRI Lite BRI Enterprise
2N BRI Enterprise / Lite
®1 1
Power supply adapter 1 1
Long antenna 1 – 2* 1 – 2*
Ethernet cable 1 1
BRI ISDN cable 1 2
Wall mounting set 1 1
*depends on the Part No.
Connector Lay-Out – Lower Side
The following connectors are available on the BRI gateway bottom:
Connector type BRI Lite BRI Enterprise
DC Jack 2.1mm supply connector YES YES

2N TELEKOMUNIKACE a.s., www.2n.cz 15/152
Connector type BRI Lite BRI Enterprise
10/100BaseT Ethernet connector YES YES
ISDN BRI TE interface NO YES
ISDN BRI NT interface NO YES
ISDN BRI NT/TE interface YES NO
Caution
2N
® has two RJ-45 connectors, which, however, are cross-BRI Lite
connected into one ISDN BRI. Be sure to connect just one ISDN BRI line
to make the system work properly. Which of the RJ-45 connectors will
be used depends on the type of the equipment to be connected (NT/TE)
and the interconnecting cable (cross/straight).
Connector Lay-Out – Upper Side
There are SMA female antenna connectors to each GSM/UMTS module on the 2N BRI
®
upper side.Enterprise / Lite

2N TELEKOMUNIKACE a.s., www.2n.cz 16/152
Status LED Indicators – 2N ® BRI Lite
The status is indicated by five LEDs on the front side. BRI 1 and BRI 2 2N BRI Lite
®
indicate the status of ISDN BRI B-channels and CH 1 and CH 2 indicate the status of
each GSM/UMTS module. Refer to the table below for the statuses
LED Indicators
Power
supply
green light – mains powered
– device switched offno light
GSM
/UMTS
network
green light – call in progress
– errorred light
– network registration, SMSgreen flashing
– module restartred flashing
– signal intensity indicationRed/green flashing
ISDN
port
green light – 2 calls in progress
– ISDN synchronisation/active callgreen flashing
– ISDN disconnectedred light
– synchronisation of lower ISDN layersred flashing
Ethernet
port
green light – disconnected+ no orange light
– 100BaseT connected, in operationgreen light + orange flashing
no green light + orange light – 10baseT connected, no operation
green flashing + orange flashing – 10BaseT connection, in operation
Signal
intensity
Signal intensity indication:one segment = less than −109dbmtwo segments =
more than −95dbmthree segments = more than −81dbmfour segments = more
than −65dbm
*If the devices have been interconnected, the layers will not be connected until the
first call.

2N TELEKOMUNIKACE a.s., www.2n.cz 17/152
Status LED Indicators – 2N ® BRI Enterprise
The status is indicated by five LEDs on the front side. BRI 1 and 2N BRI Enterprise
®
BRI 2 indicate the status of ISDN BRIs and CH 1 and CH 2 indicate the status of each
GSM/UMTS module. Refer to the table below for the statuses.
LED Indicators
Power
supply
green light – mains powered
– device switched offno light
GSM
/UMTS
network
green light – call in progress
– errorred light
– network registration, SMSgreen flashing
– module restartred flashing
– signal intensity indicationRed/green flashing
ISDN
port
green light – 2 calls in progress
– ISDN synchronisation/active callgreen flashing
– ISDN disconnectedred light
– synchronisation of lower ISDN layersred flashing
Ethernet
port
green light – disconnected+ no orange light
– 100BaseT connected, in operationgreen light + orange flashing
no green light + orange light – 10baseT connected, no operation
green flashing + orange flashing – 10BaseT connection, in operation
Signal
intensity
Signal intensity indication:one segment = less than −109dbmtwo segments =
more than −95dbmthree segments = more than −81dbmfour segments = more
than −65dbm
* If the devices have been interconnected, the layers will not be connected until the
first call.
**Remember to set the signal intensity indication in the gateway configuration menu.
Potential GSM/UMTS Troubles
All gateways work reliably under a long-time full load. The following problems 2N GSM
may be caused by GSM/UMTS networks:

2N TELEKOMUNIKACE a.s., www.2n.cz 18/152
The GSM/UMTS module(s) cannot log in, log in slowly, or log out occasionally.
This problem may be caused by any of the following situations:
The GSM/UMTS signal is low. The minimum signal level should be
approximately . If lower, change the antenna position or type!−80dBm
The GSM/UMTS cell (BTS) to which the GSM/UMTS modules are trying to
log in is overloaded. Change the antenna position or reduce the count of
the logged-in GSM/UMTS modules.
One of the GSM/UMTS modules is permanently logged-out or fails to make
outgoing calls:
The problem indicates a GSM/UMTS network overload on the installation
site. To eliminate the problem, set the parameter to . Relax delay 2 seconds
If the GSM module fails to log in or rejects to make outgoing GSM calls
even after the gateway restart, consult your GSM provider for your SIM
card/GSM module availability.
The manufacturer shall not be held liable for any SIM card or provider service
unavailability in the case of a breach of the provider's SIM terms and conditions for the
SIM card use.

2N TELEKOMUNIKACE a.s., www.2n.cz 19/152
2.2 Brief Installation Guide
Installation Conditions
The following installation conditions have to be met for a proper installation:
2N BRI Enterprise / BRI Lite
® is to be installed on a site with enough free space.
2N BRI Enterprise / BRI Lite
® is to be mounted on a suitable vertical surface. For
this purpose, a hanger is included in the gateway delivery, which is fitted to the
wall using dowels and screws and used for gateway hanging.
It is possible to operate the gateway in another working position too, e.g. on a
desk, for a short time for servicing and testing purposes, for example.
Any excess of the allowed working temperature may not affect the 2N BRI
®
function immediately but may result in faster ageing and Enterprise / BRI Lite
lower reliability. For the allowed working temperature and humidity ranges refer
to .S. 7
2N BRI Enterprise / BRI Lite
® is not designed for high-vibration environments
such as means of transport, machine rooms, and similar.
2N BRI Enterprise / BRI Lite
® is not designed for dusty environments or places
exposed to high humidity and temperature changes.
2N BRI Enterprise / BRI Lite
® may not be exposed to aggressive gases, acid and
solvent vapours (during cover cleaning, e.g.).

2N TELEKOMUNIKACE a.s., www.2n.cz 20/152
2N BRI Enterprise / BRI Lite
® is intended for indoor use. It may not be exposed
to rain, flowing water, condensing moisture, fog, and so on.
2N BRI Enterprise / BRI Lite
® may never be exposed to direct sunshine or
placed close to heat sources (radiators).
A sufficient clearance must be kept over and under 2N BRI Enterprise / BRI Lite
®
for cabling and air flow to carry off the heat.
A sufficient GSM/UMTS signal intensity has to be provided for 2N BRI
®
.Enterprise / BRI Lite
An adequate capacity of the GSM/UMTS network has to be ensured (no BTS
overload). Remember that multiple GSM gateways used in one location may
overload the base transceiver station (BTS) you are currently logged in to. This
may lead to a permanent or occasional rejection of GSM/UMTS calls!
No strong electromagnetic radiation is allowed on the 2N BRI Enterprise / BRI
®
installation site.Lite
No strong electromagnetic reflections are allowed on the 2N BRI Enterprise /
®
antenna installation site.BRI Lite
An inappropriate location of or its antenna close to 2N BRI Enterprise / BRI Lite
®
television, broadcasting and/or other rf-sensitive sets may impair the function of
these sets.
Being a source of radio frequency emissions, the 2N BRI Enterprise / BRI Lite
®
antenna should not occur in the close vicinity of the human body. The health
hazard is higher than with mobile phones as, generally, gateways shared by
multiple users show a very high traffic.
It is recommended that the power supply adapter should be connected to a
network with a UPS back-up and due overvoltage protection.
SIM Card Inserting/Removing
Insert the SIM card in the bottom as shown in the figure. 2N BRI Enterprise / BRI Lite
®
As the SIM slots are of the Push/Pull type, just slide the card in and push it into
position. Push the SIM gently to slide it out of the slot.
Other manuals for BRI Lite
2
Table of contents
Other 2N Gateway manuals

2N
2N EasyGate Pro User manual

2N
2N SpeedRoute User manual

2N
2N SmartGate UMTS User manual

2N
2N ATEUS 501106E User manual

2N
2N VoiceBlue Next User manual

2N
2N SmartGate User manual

2N
2N BRI-VoIP-GSM User manual

2N
2N EasyGate IP User manual

2N
2N EasyRoute Installation and user guide

2N
2N EasyGate Pro User manual
Popular Gateway manuals by other brands

Multitech
Multitech MultiVOIP 800 MVP800 quick start guide

Multitech
Multitech Conduit 300 Series Hardware guide

Intempco
Intempco CX5000 manual

Paradox
Paradox R885S Installation and operating instructions

Peripheral Electronics
Peripheral Electronics SIMPLE PGHGM3 owner's manual

Peripheral Electronics
Peripheral Electronics PGHTY1 owner's manual