Aaeon AHP-1122 User manual

Touch Panel PC AHP-1122
AHP-1122
Onboard Intel® Atom D510
1.6 GHz Processor
Touch Panel PC
With 12.1” TFT LCD
AHP-1122 Manual 1st Ed.
November 2010

Touch Panel PC AHP-1122
i
Copyright Notice
This document is copyrighted, 2010. All rights are re served. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this man ual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufa cturer. Information provided in
this manual is intended to be accurate and reli able. However, the
original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result
from its use.
The material in this document is for product information only and is
subject to change witho ut notice. While reasona ble efforts have
been made in the pre paration of this document to assu re its
accuracy, WKHPDQXIDFWXUHU assumes no liabilitie s resulting from
HUURUVRUomissions in this docum ent, or from the use of the
LQIRUPDWLRQcontained herein.
The manufacturer reserves the right to make changes in the
SURGXFWGHVLJQwithout notice to its users.

Touch Panel PC AHP-1122
ii
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
• AMI is a trademark of American Megatrends Inc.
• Intel®, and Atom™ are trademarks of Intel® Corporation.
• Microsoft Windows® is a registered trademark of Microsoft
Corp.
• IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
All other product names or trademarks are properties of their
respective owners.

Touch Panel PC AHP-1122
iii
Packing List
Before you begin operating your PC, please make sure that the
following materials are enclosed:
z AHP-1122 Touch Panel PC
z Phoenix Terminal Block
z Mounting brackets and screws
z CD-ROM for manual (in PDF format) and drivers
If any of these items should be missing or damaged, please contact
your distributor or sales representative immediately.

Touch Panel PC AHP-1122
iv
Safety & Warranty
1. Read these safety instructions carefully.
2. Keep this user's manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Do
not use liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near
the equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a firm surface during installation. Dropping
it or letting it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This could cause fire or
electrical shock.
13. Never open the equipment. For safety reasons, only qualified
service personnel should open the equipment.
14. If any of the following situations arises, get the equipment
checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.

Touch Panel PC AHP-1122
v
d. The equipment does not work well, or you ca nnot get it
to work according to the user’s manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
WHERE THE STORAGE TEMPERATURE IS BELOW -20°C
(-4°F) OR ABOVE 60°C (140°F). IT MAY DAMAGE THE
EQUIPMENT.
FCC
This device complies with Part 15 FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received including
interference that may cause undesired
operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the
manufacturer’s instructions and your local government’s recycling or
disposal directives.

Touch Panel PC AHP-1122
vi
Below Table for China RoHS Requirements
产品中有毒有害物质或元素名称及含量
Panel PC/ Workstation
有毒有害物质或元素
部件名称 铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
× ○○○○○
外部信号
连接器及线材
× ○○○○○
外壳 × ○○○○○
中央处理器
与内存
× ○○○○○
硬盘 × ○○○○○
液晶模块 × ○○○○○
光驱 × ○○○○○
触控模块 × ○○○○○
电源 × ○○○○○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质中央处理器、内存、硬盘、光驱、触控模块为选购品。

Touch Panel PC AHP-1122
vii
Contents
Chapter 1 General Information
1.1 Introduction................................................................ 1-2
1.2 Specification .............................................................. 1-3
1.3 Dimension ................................................................. 1-6
Chapter 2 Hardware Installation
2.1 Panelmount Installation............................................. 2-2
2.2 COM 1/2 RS-232/422/485 Serial Port Connector ..... 2-4
2.3 CompactFlash™ Installation ..................................... 2-5
2.4 Hard Disk Drive Installation....................................... 2-6
Chapter 3 AMI BIOS Setup
3.1 System Test and Initialization ................................... 3-2
3.2 AMI BIOS Setup ........................................................ 3-3
Chapter 4 Driver Installation
4.1 Introduction................................................................ 4-3

Touch Panel PC AHP-1122
Chapter 1 General Information 1- 1
General
Chapter
1
Information

Touch Panel PC AHP-1122
Chapter 1 General Information 1- 2
1.1 Introduction
The AHP-1122 operator panel is an Intel® Atom™ D510 1.66 GHz
processor computer that is designed to serve as a human machine
interface (HMI). It is a PC-based system with 12.1" color TFT LCD
display, onboard Ethernet controller, multi-COM port interfaces and
an audio co ntroller. With a built-in CompactFlash socket, the
AHP-1122 is as com pact and user friendly as a multi-function
computer. In addition, its "fit anywhere" design makes it very
flexible and able to be use d in many different kinds of installations.
It can be VESA 75 wall mounted.
For system integrators, this simple, complete, compact and highly
integrated system let you easily bui ld an operator p anel into your
applications. Common industrial applications include factory
automation systems, precision machinery, and production process
control. It is also suitable for many non-industrial applications,
including vending machine, and car park automation. Our operator
panel is a reliable, cost -effective solution to you r application's
processing requirements.

Touch Panel PC AHP-1122
Chapter 1 General Information 1-3
1.2 Specification
System
z CPU Onboard Intel® Atom™ D510 1.66 GHz
Processor
z System Memory DDR2 SODIMM x 1, Max. 2 GB
z LCD / CRT Controller Integrated in Processor, shared memory
up to 224 MB
z I/O Port USB2.0 x 4
RS-232 x 1
RS-232/422/485 x 1
LAN x 2
VGA x 1
z Storage Disk Drive CompactFlash™ slot x 1 (Internal);
2.5” SATA Hard Disk Drive x 1
z Expansion PCI-Express Mini Card x 2
z OS Support Windows® CE 6.0, Windows® XP
Embedded, Windows® 7, Windows®
Embedded Standard 7, Linux Fedora
Mechanical
z Construction IP-65 certified plastic front bezel and
back panel
z Color PMS 5425C + Gray
z Mounting VESA 75

Touch Panel PC AHP-1122
Chapter 1 General Information 1- 4
z Dimension 12.5”(W) x 9.6”(H) x 2.5”(D) (317mm x
243mm x 64mm)
z Carton Dimension 16.6”(W) x 7.7”(H) x 15.9”(D) (422mm x
196mm x 404mm)
z Net Weight 7 lb (3.2 kg)
z Gross Weight 9.3 lb (4.2 kg)
Environmental
z Operating Temperature 32oF~122oF (0oC~50oC)
z Storage Temperature -4oF~140oF (-20oC~60oC)
z Operating Humidity 5 to 90%@ 40oC, non-condensing
z Vibration 3 g rms/ 5-500Hz/ Operation—With
Hard Disk Drive
z Shock 20 G peak acceleration (11 msec.
duration)
z EMC CE/FCC Class A
z Power Supply DC 12V
LCD
Model AHP-1122HTT AHP-1122STT
z Display Type 12.1” TFT LCD
z Max. Resolution 1024x768
z Max. Colors 262K
z Luminance (cd/m2) 500 cd/m2 1000 cd/m2
z Viewing Angle 160o (H),160o (V) 160o (H),140o (V)

Touch Panel PC AHP-1122
Chapter 1 General Information 1-5
z Backlight LED
z Backlight MTBF (Hours) 50,000 60,000
Touch Screen
z Type 5-wire analog resistive
z Resolution 2048x2048
z Light Transmission > 80%
z Lifetime 35 million activations

Touch Panel PC AHP-1122
Chapter 1 General Information 1- 6
1.3 Dimension
Cutout Size:303mm x 229mm

Touch Panel PC AHP-1122
Chapter 2 Quick Installation Guide 2-1
Hardware
Installation
Chapter
2

Touch Panel PC AHP-1122
Chapter 2 Quick Installation Guide 2 - 2
2.1 Panelmount Installation
The display panel can be mounted into the wall. You will need the
screws along with the mounting brackets, which be packed in the
accessory box. Follow the steps below:
Before you start to follow the instructions, please place the
display panel into the wall. See the following illustration on the
left.
Step 1: Place the mounting brackets and plug the screw.
Step 2: Aim the mounting set at the hole on the monitor.
Step 3: Move the mounting set to the narrow gauge and fix it with
screws.
Step 4: You’ve completed the preliminary when the mounting set
is tightened. Next, repeat the steps and tighten all mounting set
around the monitor until the monitor is firmly mounting on the
wall.
1
2
3
4

Touch Panel PC AHP-1122
Chapter 2 Quick Installation Guide
2 - 3
Complete Illustration

Touch Panel PC AHP-1122
Chapter 2 Quick Installation Guide 2 - 4
2.2 COM1/2 RS-232/422/485 Serial Port Connector
COM1 (D-sub 9 male)
5
4
2
1
9
8
6
7
Pin Signal Pin Signal
1 DCD 2 RXD
3 TXD 4 DTR
5 GND 6 DSR
7 RTS 8 CTS
9 RI
COM2 RS-232/422/485 (D-sub 9 male)
5
4
2
1
9
8
6
7
Pin Signal Pin Signal
1 DCD
(422TXD-/485DATA-) 2 RXD (422RXD+)
3 TXD
(422TXD+/485DATA+) 4 DTR (422RXD-)
5 GND 6 DSR
7 RTS 8 CTS
9 RI/+5Volt/+12Volt

Touch Panel PC AHP-1122
Chapter 2 Quick Installation Guide
2 - 5
2.3 CompactFlash Installation
Step 1: Loose the screws on the rear cover to open the AHP-1122
Step 2: Unfasten the three screws to take out the heat sink from AHP-1122

Touch Panel PC AHP-1122
Chapter 2 Quick Installation Guide 2 - 6
Step 3: Insert the CompactFlash card to the CompactFlash slot
2.4 Hard Disk Drive Installation
Step 1: Loose the screws on the rear cover to open the AHP-1122