ABB CP6 WEB Series Installation manual

1
Setup of the IPAddress
If a fixed IP address is used instead of obtaining an IP address via DHCP.
1. Click on Windows Start.
2. Select Network and Dial-up Connections.
3. Doubleclick on the Ethernet-network symbol: ULTIEMAC1 or EMAC1.
4. Change the IP address of the CP6xx-WEB Control Panel by using the soft input
panel or connected USB-Keyboard.
5. IMPORTANT:
To make this change permanent, exit the Network Connections
and doubleclick on the Registry Save icon on the desktop.
CP6xx-WEB Start-Up Instructions
License of MicroBrowser
The CP6xx-WEB Control Panels already contain the license for the MicorBrowser.
Soft Input Panel (SIP)
Instead of connecting a keyboard via the USB
port of the CP6xx-WEB Control Panel, a soft
input panel can be used.
To access the soft input panel click on the red
pencil or grey keyboard symbol on the right cor-
ner of the taskbar.
1. Select Keyboard to activate and Hide Input Panel to deactivate the keyboard.
2. Select LargeKB to activate a larger keyboard and Keyboard to return to the smaller
keyboard.
Calibrate the Touch of the Display
1. Click on Windows Start.
2. Select Control Panel.
3. Doubleclick on the symbol System Settings.
The system settings tool is a rotating menu through which you
can scroll using the Next and Back buttons.
4. Click on Next until Calibrate Touch appears in blue in the middle.
Doubleclick it and follow the instructions.
5. Exit the rotating menu by pressing the cross in the upper right corner.
Update of the MicroBrowser
If a newer version of the MicroBrowser is available just replace the file
My Device\Flash\MicroBrowser\MicroBrowser_CE.exe with the new one copied
on a USB-Stick. Be careful to select the right file for your Control Panel type.
Further information
Further information can be found on our homepage www.abb.com/PLC
Check there for
• Release
notes
• Detailed instructions about the MicroBrowser settings
• Updates of the MicroBrowser
2CDC159011M0201 / 08.2011
ABB STOTZ-KONTAKT GmbH
Eppelheimer Str. 82 Postfach 101680
69123 Heidelberg 69006 Heidelberg
Germany Germany
Telephone [phone]
Telefax [phone]
E-mail [email protected]
nternet http://www.abb.com/plc
2CDC 159 011 M0201

2
Configuration Mode of MicroBrowser (Kiosk-Mode)
1. The MicroBrowser can run in “Kiosk-Mode” where the menu and the task
bar will disappear.
To activate the Kiosk-Mode open My Device\Flash\MicroBrowser and
doubleclick on the icon KioskMode.
2. To activate the menu and task bar doubleclick the icon NoKioskMode.
Default is NoKioskMode.
Autostart of MicroBrowser
1. To automatically start the MicroBrowser at startup of the
Control Panel open My Device\Flash\MicroBrowser and
doubleclick the icon Enable_Autostart.
2. To deactivate the autostart of the MicroBrowser doubleclick
the icon Disable_Autostart.
Start MicroBrowser
To start the MicroBrowser doubleclick the icon MicroBrowser.
The dialog of the host or IP address appears.
Default remote address is
“http://192.168.0.1/webvisu.htm”.
Change this IP address to the address of your remote web server (IP address of target PLC).
This address will be stored unless you change to Kiosk-Mode or NonKiosk-Mode
like described above.
To access the CoDeSys web server of AC500 type webvisu.htm in the field Path or full URL.
If you select the checkbox Always use these settings
this configuration dialog will not appear
anymore, unless you change to Kiosk-Mode
or NonKiosk-Mode like described above.
3
Exit MicroBrowser
• If the MicroBrowser is not running in Kiosk-Mode use File\Exit from the menu bar.
• If the MicroBrowser is running in Kiosk-Mode connect a USB-Keyboard and
press <Shift> + <X>
• In the CoDeSys visualization an exit button can be created. Choose the
category Input.
Enable Execute program. Select (INTERN) EXITPROGRAM as configured
program.
• If Autostart is enabled and no keyboard is available:
Create a file autoexec.bat with the following line “del \Flash\autoexec.bat”.
Copy this file to the root of an USB-Stick and insert it while the
Control Panel is running.
Reboot the Control Panel. After the reboot the autostart is disabled.
2CDC159011M0201 / 08.2011