ABB 83310-500 User manual

0073-1-7524 │ │ 22.02.2012
ABB-Welcome
Pos: 2 /DinA4 - Anleitungen Onli ne/Inhalt/K NX/DoorEntry/83310/ Titelblatt - 83310 - ABB @ 19\mod_1323174 018866_15.doc x@ 111018 @ @ 1
83310-500
83310
-515
Auxiliary power supply
=== Ende der Liste für Te xtmarke Cover ===

ABB
-Welcome
| 0073-1-7524
— 2 —
Pos: 4 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Inhal tsverzeichnis (--> Für alle Dokument e <--)/Inhaltsverzeichn is @ 19\mod_132064904438 6_15.docx @ 109653 @ @1
1Safety....................................................................................................................................................................... 3
2Intended use ............................................................................................................................................................ 3
3Environment............................................................................................................................................................. 3
3.1 ABB devices............................................................................................................................................ 3
4User Manual............................................................................................................................................................. 3
5Operation ................................................................................................................................................................. 4
5.1 Standard operation ................................................................................................................................. 4
5.2 Adjusting the device................................................................................................................................ 5
5.2.1Terminal resistor ..................................................................................................................................... 5
6Technical data.......................................................................................................................................................... 6
7Mounting / Installation .............................................................................................................................................. 7
7.1 Requirements for the electrician ............................................................................................................. 7
7.2 General installation instructions .............................................................................................................. 7
7.3 Mounting ................................................................................................................................................. 8
7.4 Connection.............................................................................................................................................. 8
=== Ende der Liste für Te xtmarke TOC ===

ABB
-Welcome
Safety
| 0073-1-7524
— 3 —
Pos: 6 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Übersc hriften (--> Für alle Dokumente < --)/1. Ebene/S - T/Sicher heit @ 18\mod_13026127917 90_15.docx @ 103357 @ 1 @ 1
1 Safety
Pos: 7 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Sic herheit (--> Für alle Dokumente <--) /Warnhinweise/Sic herheit - 230 V @ 18\mod_130260681675 0_15.docx @ 103308 @ @1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 230 V.
– Work on the 230V supply system may only be performed by authorised electricians!
– Disconnect the mains power supply prior to installation and/or disassembly!
Pos: 8 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Übersc hriften (--> Für alle Dokumente <--)/ 1. Ebene/A - F/Bestimmungsgem äßer Gebrauch @ 18\mod_1302763 321316_15.doc x@ 103483 @ 1 @ 1
2 Intended use
Pos: 9 /DinA4 - Anleitungen Onlin e/Inhalt/KNX/Door Entry/83310/Besti mmungsgemaesser Gebrauc h - 83310-500 @ 19\mod_1323173967290_1 5.docx @ 111009 @ @1
The 83310-500 auxiliary power supply is an integral part of the ABB-Welcome door communication system and
operates exclusively with components from this system. The device must only be installed on mounting rails
according to DIN EN 500022.
Pos: 10 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Übersc hriften (--> Für alle Dokument e <--)/1. Ebene/U - Z/ Umwel t @ 18\mod_130261 4158967_15.docx @ 103383 @ 1 @ 1
3 Environment
Pos: 11 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Umwel t (--> Für alle Dokumente <--) /Hi nwe ise / Hin wei s - Umwelt - Hinweis Elektr ogeräte @ 18\mod_1302763 973434_15.docx @ 103500 @ @1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with domestic waste.
– The device contains valuable raw materials which can be recycled. Therefore, dispose of the
device at the appropriate collecting depot.
Pos: 12 /DinA4 - Anleitungen Online/U eberschriften/2. /ABB Geraete @ 19\mod_13231628 43832_15.docx @ 110875 @ 2 @ 1
3.1 AB B devices
Pos: 13 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Umwel t (--> Für alle Dokumente <--)/ Hin wei se/ Hi n wei s - Umwelt - ABB Elektrogerät e @ 19\mod_1323162745839_15. docx @ 110867 @ @ 1
All packaging materials and devices from ABB bear the markings and test seals for proper disposal. Always
dispose of the packaging material and electric devices and their components via the authorized collecting depots
and disposal companies.
ABB products meet the legal requirements, in particular the laws governing electronic and electrical devices and
the REACH ordinance.
(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)
Pos: 14 /DinA4 - Anleitungen Online/U eberschriften/1. /Anwenderhandbuch @ 19\mod_13093472 27593_15.docx @ 107473 @ 1 @ 1
4 User Manual
Pos: 15 /DinA4 - Anleitungen On line/Inhalt/KNX/Door Entry/Systemhandb uch/Anwenderhandbuch - ABB @ 19\mod_1323 163157997_15.doc x@ 110883 @ @ 1
Detailed information for planning ABB-Welcome systems is contained in the user manual. Download at
www.Busch-Jaeger.com.
Pos: 16 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Steuer module - Onli ne-Dokumentation (--> Für alle Dok umente <--)/++++++++++++Seitenumbruch++++++++++++ @ 9\mod_1268898668093_ 0.docx @ 52149 @ @1

ABB
-Welcome
Operation
| 0073-1-7524
— 4 —
Pos: 17 /DinA4 - Anleitungen Online/U eberschriften/1. /Bedienung @ 18\mod_130261 3924165_15.docx @ 103365 @ 1 @ 1
5 Operation
Pos: 18 /DinA4 - Anleitungen Online/U eberschriften/2. /Normaler Betrieb @ 18\mod_1 302768820965_15.doc x@ 1035 40 @ 2 @ 1
5.1 S tandard operation
Pos: 19 /DinA4 - Anleitungen Online/I nhalt/KNX/DoorEntr y/83310/Bedienung - 83310 @ 18\mod_ 1303216853392_15. docx@ 103 787 @ @ 1
Fig. 1:
No.
Function
1
Switch for the terminal resistor (see also chapter "Terminal resistor" on page 5)
The terminal resistor is switched off.
The terminal resistor is switched on.
2
Status LED
The status LED lights up permanently = the device is operating
The status LED flashes slowly = the device is operating
The status LED flashes fast = there is an error
3
•Connection for the system controller
•When using several indoor stations: connection for the internal bus
4
Indoor stations (max. 4 pairs of wires)
•Connections for the indoor stations
•When using several indoor stations: connection for the internal bus
5
Power supply
Pos: 20 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Steuer module - Onli ne-Dokumentation (--> Für alle Dok umente <--)/++++++++++++Seitenumbruch++++++++++++ @ 9\mod_1268898668093_ 0.docx @ 52149 @ @1

ABB
-Welcome
Operation
| 0073-1-7524
— 5 —
Pos: 21 /DinA4 - Anleitungen Online/U eberschriften/2. /Geraeteeinstellu ngen @ 18\mod_1302768847744_15. docx @ 103548 @ 2 @ 1
5.2 Adjus ting the devic e
Pos: 22 /DinA4 - Anleitungen Online/ Ueberschriften/ 3./Abschlusswiders tand @ 19\mod_1321958079 906_15.docx @ 110083 @ 3 @ 1
5.2.1 Terminal res is tor
Pos: 23 /DinA4 - Anleitungen Online/I nhalt/KNX/DoorEn try/Bedienung/Absch lusswiderstand setz en 83310-xxx @ 19\mod_1312372134 009_15.docx @ 108373 @ @1
Fig. 2: Setting the terminal resistor on the device
•In pure audio installations always set the terminal resistor (1) on "OFF".
•In video installations or mixed audio and video installations set the terminal resistor for the the last devices of
a branch on "ON".
Pos: 24 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Steuer module - Onli ne-Dokumentation (--> Für alle Dok umente <--)/++++++++++++Seitenumbruch++++++++++++ @ 9\mod_1268898668 093_0.docx @ 52149 @ @1

ABB
-Welcome
Technical data
| 0073-1-7524
— 6 —
Pos: 25 /DinA4 - Anleitungen Online/U eberschriften/1. /Technische Daten @ 18\mod_1302615 863001_15.docx @ 103416 @ 1 @ 1
6 Technical data
Pos: 26 /DinA4 - Anleitungen Online/I nhalt/KNX/DoorEn try/83310/Technisc he Daten - 83310 @ 18\mod_1303216854283 _15.docx @ 103819 @ @1
Des ignation
Value
Operating temperature
-5° C – + 45° C (EN 50486)
Storage temperature
-20° C – +70° C
Protection
IP 20
Connection cross section for 230 V
•Single-wire clamps
2 x 0.6 mm² – 2 x 1 mm²
•Fine-wire clamps
2 x 0.6 mm² – 2 x 0.75 mm²
Volume
Maximum 80 dB
Mains voltage
100-240 V, 50 / 60 Hz, 0.9 A
Indoor stations for
direct connection 4
Size
8 TE
Bus voltage
28 V- ±2 V
Pos: 27 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Steuer module - Onli ne-Dokumentation (--> Für alle Dok umente <--)/++++++++++++Seitenumbruch++++++++++++ @ 9\mod_1268898668093_ 0.docx @ 52149 @ @1

ABB
-Welcome
Mounting / Installation
| 0073-1-7524
— 7 —
Pos: 28 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Übersc hriften (--> Für alle Dokument e <--)/1. Ebene/M - O/Montage / Instal lation @ 18\mod_1302613966111_1 5.docx @ 103373 @ 1 @ 1
7 Mounting / Installation
Pos: 29 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Sic herheit (--> Für alle Dokument e <--)/Warnhinweise/Sic herheit - Niederspannungs- und 230 V -Leitungen @ 18\mod_130261782 1491_15.doc x @ 103465 @ @ 1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 230 V.
– Low-voltage and 230 V cables must not be installed together in a flush-mounted socket!
In case of a short-circuit there is the danger of a 230 V load on the low-voltage line.
Pos: 30 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Sic herheit (--> Für alle Dokument e <--)/Warnhinweise/Sic herheit - Fachkenntnisse @ 18\m od_1302774384017_15.d ocx @ 103564 @ 2 @ 1
7.1 R equirements for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering knowledge and experience.
•Incorrect installation endangers your life and that of the user of the electrical system.
•Incorrect installation can cause serious damage to property, e.g. due to fire.
The minimum necessary expert knowledge and requirements for the installation are as follows:
•Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect from power;
2. Secure against being re-connected;
3. Ensure there is no voltage;
4. Connect to earth;
5. Cover or barricade adjacent live parts.
•Use suitable personal protective clothing.
•Use only suitable tools and measuring devices.
•Check the type supply network (TN system, IT system, TT system) to secure the following
power supply conditions (classic connection to ground, protective earthing, necessary
additional measures, etc.).
Pos: 31 /DinA4 - Anleitungen Online/ Inhalt/KNX/DoorEntr y/Montage/Montagehi nweise - Allgemein @ 19\mod_131 0563670478_15.doc x@ 107743 @ 2 @ 1
7.2 General installation instructions
•Terminate all branches of the wiring system via a connected bus device (e.g., indoor station, outdoor station,
system device).
•Do not install the system controller directly next to the bell transformer and other power supplies (to avoid
interference).
•Do not install the wires of the system bus together with 230 V wires.
•Do not use common cables for the connecting wires of the door openers and wires of the system bus.
•Avoid bridges between different cable types.
•Use only two wires for the system bus in a four-core or multi-core cable.
•When looping, never install the incoming and outgoing bus inside the same cable.
•Never install the internal and external bus inside the same cable.
Pos: 32 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Steuer module - Onli ne-Dokumentation (--> Für alle Dok umente <--)/++++++++++++Seitenumbruch++++++++++++ @ 9\mod_1268898668093_ 0.docx @ 52149 @ @1

ABB
-Welcome
Mounting / Installation
| 0073-1-7524
— 8 —
Pos: 33 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Übersc hriften (--> Für alle Dokument e <--)/2. Ebene/M - O/Montage @ 18\mod_130261 5960458_15.doc x@ 103424 @ 2 @ 1
7.3 Mounting
Pos: 34 /DinA4 - Anleitungen Online/I nhalt - Montage/Montage - Hutsc hienen nach DIN EN 500022 @ 18\mod_1 303218164750_15.doc x @ 103868 @ @ 1
The device 83310-500 must only be installed on mounting rails according to DIN EN 500022.
Pos: 35 /DinA4 - Anleitungen Online/U eberschriften/2. /Anschluss @ 18\mod_13026 17573351_15.docx @ 103449 @ 2 @ 1
7.4 Connection
Pos: 36 /DinA4 - Anleitungen Online/I nhalt/KNX/DoorEntr y/83310/Anschluss - 83310 @ 18\mod_130 3216853127_15.docx @ 103779 @ @1
Fig. 3:
No.
Function
1
•Connection for the system controller
•When using several indoor stations: connection for the internal bus
2
Indoor stations (max. 4 pairs of wires)
•Connections for the indoor stations
•When using several indoor stations: connection for the internal bus
3
Power supply
=== Ende der Liste für Te xtmarke Content ===

ABB
-Welcome
0073-1-7524 | | 22.02.2012
Pos: 38 /Busch-Jaeger (Neustruk tur)/Modul-Struktur/ Online-Dokumentation/Rüc kseiten (--> Für alle Dokumente <--) /Rückseite - Busch-Jaeger - Allgemein @ 20\mod_1327320 074886_15.doc x@ 137103 @ @ 1
A
member of the ABB Group
Busch
-Jaeger Elektro GmbH
PO box
58505 Lüdenscheid
Freisenbergstraße 2
58513 Lüdenscheid
Germany
www.BUSCH
-JAEGER.com
[e-mail]
Central sales service:
Phone:
[phone]
Fax:
[phone]
Notice
We reserve the right to at all times make
technical changes as well as changes to the
contents of this document without prior notice.
The detailed specifications agreed to at the time
of ordering apply to all orders.
ABB accepts no
responsibility for possible errors or
incompleteness in this document.
We reserve all rights to this document and the
topics and illustrations contained therein. The
document and its contents, or extracts thereof,
must not be reproduced, transmitted or reused by
third parties without prior written consent by ABB.
Copyright© 2012
Busch-Jaeger Elektro GmbH
All rights reserved
=== Ende der Liste für Te xtmarke Backcover ===