ABB Eagle User manual

__
Eagle Quick Start Guide
PAGE 1 OF 4
Welcome to Eagle
Eagle Packaging (x1) Mount Packaging (x1)
Aux Power Supply (x1)
Animal Guard (x2)
Animal Guard (x1)
Connecting to Eagle
Connect Aux Power Supply Connect to Eagle Wi-Fi
WIFI_RER605
Secured
Network_1
Secured
Network_2
Secured
Network_3
Secured
Network&InternetSettings
WIFI_RER605
Secured
Enterthenetworksecuritykey
qwerty123
Next Cancel
Enter the Default Password
http://
http://rer605.abb.com
Navigate to Eagle Web-HMI
OPERATOR
0002
ENGINEER
0003
ADMIN
0004
Open the Eagle Dashboard Login with Default User Roles
1YEPTSS0020E004RevA,December2020

__
Eagle Quick Start Guide
PAGE2OF4
Settings Guide
B
R
S
Available in Breaker Mode Only
Available in Recloser Mode Only
Available in Sectionalizer Mode Only
Dashboard
Single Line Diagram
Open/Close Pushbuttons
Primary Current Metering
Reset Pushbutton
Device Status
Autoreclose On/Off Button
NR & HLT On/Off Button
CLP On/Off Button
Monitoring
Self Supervision
Events & Fault Records
Live Data
Disturbance Recorder
Load Profile
Security Log
Settings
Protection
Inrush
CB Monitoring
Recloser
Sectionalizer
Cold Load Pickup
Hot Line Tag
Disturbance Recorder
Import Export
Configuration
General
Active Functions
Measurements
Recloser ID
System Time
Language Select
Test
79-Reclose
Sectionalizer
Protection
Firmware
Version Information
Primary/Backup Firmware Information
Firmware Update
Backup Firmware Restore
Users & Access
Wi-Fi Parameters
Change Password
R
B R
B R
R
S
B R
B
R
S

__
Eagle Quick Start Guide
PAGE 3 OF 4
Installing the Eagle Restoration after a Lockout
1
2
3
4
Ø 9/16"
Prepare the mount
Hang the Eagle
Handle the Eagle carefully
with hands while hanging
it. Use appropriate PPE
Connect the Eagle
Ensure that the H1
terminal is securely
latched to the mount
Manually Close the Eagle
Verify that the indicator
cup is in open position
before placing Eagle in
the mount
Operate the main handle using
a hotstick. The handle will
naturally come back down
after closing the VI
Verify close operation with the
indicator cup
1
2
3
Fix the Fault
Identify the locked out
recloser with the lockout
LED (flashes once every 4s)
Fix the downstream fault
The Lockout LED may not blink if
the recloser has lost the stored
charge. The indicator cup can be
used to identify the locked out
recloser
Reset the Recloser
Operate the main handle
using a hotstick to reset the
recloser.
The Lockout LED will stop
flashing if it was active
before resetting
Manually Close the Eagle
Operate the main handle using
a hotstick. The handle will
naturally come back down
after closing the VI
Verify close operation with the
indicator cup
Swing the recloser from H1
connection ring using a
hotstick to secure the Eagle
in its mount
ANSI: Red=Closed, Green=Open
IEC: Red=Open, Green=Closed

__
Eagle Quick Start Guide
PAGE 4 OF 4
Manual Opening and Closing
Manually Close the Eagle
Verify that the indicator cup
shows OPEN state
Operate the main handle
using a hotstick. The handle
will naturally come back
down after closing the VI
Verify that the indicator cup
shows CLOSE state
Manually Open the Eagle
Verify that the indicator cup
shows CLOSE state
Operate the main handle
using a hotstick. The handle
will naturally come back
down after opening the VI
Verify that the indicator cup
shows OPEN state
Wi-Fi Activation using Non-Reclose Handle
Wi-Fi Activation using Light Sensor
Engage Lever Disengage LeverWait 3s
If the Eagle has sufficient charge, the Lockout LED may flash once to indicate activation of Wi-Fi.
Shine Flashlight for 2s Turn off Flashlight for 5s Shine Flashlight for 2s
If the Eagle has sufficient charge, the Lockout LED may flash once to indicate activation of Wi-Fi.
ANSI: Red=Closed, Green=Open
IEC: Red=Open, Green=Closed